Адаптер SharkBite 1/2 дюйма MNPT, латунный сантехнический фитинг, нажимное соединение, труба PEX, медь, ХПВХ, PE-RT, HDPE, U120LFA 1/2 дюйма.

Brand:SharkBite

3.7/5

28.69

ОПИСАНИЕ ПРОДУКТА Упростите свои потребности в сантехнике с помощью штекерного адаптера SharkBite Push to Connect MNPT. Изготовленные из прочной бессвинцовой латуни и имеющие полнопроходную конструкцию для максимального расхода воды, фитинги SharkBite могут использоваться с любой комбинацией медных труб, труб PEX, CPVC или PE-RT, а также имеют простую конструкцию с нажимным соединением, позволяющую быстрая установка. Нет необходимости в обжиме, клее, пайке или инструментах, просто вставьте трубу, и зубья из нержавеющей стали вгрызутся и крепко схватятся, в то время как специально разработанное уплотнительное кольцо сжимается, создавая идеальное уплотнение. Адаптер MNPT можно легко разобрать с помощью инструмента для разъединения, чтобы можно было легко заменить и использовать фитинги и клапаны (инструмент для разъединения не входит в комплект поставки). Фитинг MNPT можно даже повернуть после сборки, чтобы облегчить установку в труднодоступных местах. Этот сантехнический фитинг MNPT представляет собой сертифицированное промышленное соединение, которое можно устанавливать в мокрых трубопроводах, а также для подземных и застенных применений. Переходник MNPT с нажимным соединением рассчитан на давление 200 фунтов на кв. дюйм и температуру 200 градусов по Фаренгейту и поставляется с 25-летней гарантией. ОТ ПРОИЗВОДИТЕЛЯ SharkBite — это система соединения push-fit, которая действительно завоевывает популярность. Это самый простой способ соединения медных труб, труб из ХПВХ или PEX в любой комбинации - без пайки, хомутов, соединений или клея. Просто вставьте трубу, и зубья из нержавеющей стали вгрызутся в нее и крепко схватятся, в то время как специально разработанное уплотнительное кольцо сжимается, создавая идеальное уплотнение. Разборка выполняется так же быстро с помощью простого инструмента для отсоединения. Таким образом, фитинги и клапаны можно легко заменить и использовать повторно. Их можно даже поворачивать после сборки для облегчения установки в ограниченном пространстве. Получите SharkBite и получите контроль над своим следующим сантехническим проектом. Эти фитинги не содержат свинца и отвечают всем требованиям к сантехнике в Калифорнии и Вермонте.

СЕРТИФИЦИРОВАН: Фитинг MNPT сертифицирован как промышленное соединение и может использоваться для подземных и застенных применений без панелей доступа; рассчитан на 200 фунтов на квадратный дюйм и 200 градусов по Фаренгейту. ПРОЧНОСТЬ: Фитинг не содержит свинца и устойчив к коррозии, что обеспечивает длительный срок службы и надежность. СОВМЕСТИМОСТЬ С ТЕСТНЫМИ ПРОСТРАНСТВАМИ: Латунный фитинг можно легко повернуть на трубе после установки для использования в ограниченном пространстве. ЛЕГКО ИСПОЛЬЗОВАТЬ: Прямой разъем имеет инновационную конструкцию, позволяющую легко и быстро установить соединение; никаких инструментов, пайки, обжима или клея не требуется. ЛАТУННЫЙ ВТУЛОЧНЫЙ ФИТИНГ: Штуцер с наружной резьбой можно использовать для соединения с любой комбинацией медных труб, труб PEX, CPVC или PE-RT; можно использовать для мокрых линий.
Batteries Included? ‎No
Batteries Required? ‎No
Brand SharkBite
Brand ‎SharkBite
Color Brass
Color ‎Brass
Connector Type Adapter
Connector Type ‎Adapter
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 2,944 ratings 4.7 out of 5 stars
Exterior Finish Brass
Exterior Finish ‎Brass
Finish ‎Brass
Included Components ‎Fitting
Installation Method ‎SharkBite Push-To-Connect
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 10.75 x 4 x 6.25 inches
Item Dimensions LxWxH ‎10.75 x 4 x 6.25 inches
Item model number ‎U120LFA
Item Package Quantity ‎1
Item Weight 0.1 Pounds
Item Weight ‎0.1 Pounds
Item Weight ‎1.6 ounces
Manufacturer ‎Cash Acme
Material Brass
Material ‎Brass
Measurement System ‎Inch
Number Of Pieces 2
Number Of Pieces ‎2
Part Number ‎U120LFA
Product Dimensions ‎10.75 x 4 x 6.25 inches
Size 1/2 in.
Size ‎1/2 in.
Style ‎Brass Push Male Adapter
Thread Type NPT
Thread Type ‎NPT
Warranty Description ‎Lifetime

3.7

13 Review
5 Star
82
4 Star
11
3 Star
3
2 Star
1
1 Star
3

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: AmazoCedric
The Amazing Sharkbite 1-1/4 connector fitting
This fitting is the answer to replacing the unreliable ugly boot coupling for smooth copper pipes coming out the wall. This is the the answer for older homes with copper pipes. Tight fit over the copper pipe with no leaks. Sharkbite a friend for life.
Scritto da: Wendy Chan
It works!
Easy to install and very solid connection. It serve the purpose.
Scritto da: John
Quality
Excellent product
Scritto da: Veetuch
Easy to use
Love using Shark Bite connectors, especially when I have to do connections inside the rafters. No soldering with a torch and these are simple push onto your pipe and they stay in place. Good quality material and no leaking. Recommended them for your project.
Scritto da: Anonimo
Initially concerned....
Not gonna lie. When I first got these I was concerned about leaks and waking up to my basement flooding as I had never used them. I'm used to either brazing copper pipes or priming and gluing pvc tubing. I'm a bit of a control guy and when I moved into my house years ago had ripped out the horror that was the tubing entering my basement from the well pump.. put in a whole house filter, pressure tank, other, removable filters and carbon filters, water softener etc. After years of use the softener had given up and the mechanisms sprung leaks all over. I wanted to take that out and instead put in an iron removing filter as our sinks and toilets need constant scrubbing with some of our lighter clothes becoming "work on the car" items due to staining. I read a lot of reviews here and elsewhere about the sharkbite connectors and wound up ordering them.. heck, they were returning so why not? I cut cpvc to length and put connected everything with sharkbite elbows, reducers, and a valves. Once I slipped everything together, crossed my fingers and opened up the water. Hmm,.. so far so good but lets wait and see.. turned on the water throughout the house and watched everything pop and shake as air bled out of the system and pressurized to 70psi. Okay.. so far so good. Cleaned up and went upstairs to eat.. came back down checking for leaks... went to watch tv (The Boys-started slow but ROCKS)... wife and I took turns checking for leaks. Went to bed... got up a few times... and now it's been a few weeks. Not a drop of water and none of the pipes has tried to slip out as we have them all marked for this purpose. These things rock! One of the things I like best is that you can rotate the fittings (ie; the pipes can still move, rotate etc) without leaks which means it's all super forgiving if you get your lengths slightly off and stuff is not 100% straight and true.. it adjusts.. something PVC and Copper do NOT do... and I can also move stuff around a few inches if needed without cutting/de-brazing pipes etc. I'm a convert!
Scritto da: Reality Check
This fitting really saved the day
I had to change out a tub valve through a tiny 7 inch round opening . This fitting had 4 pipes: A hot and cold PEX, a PEX running to the shower, and a hard copper line running to the tub spout. All fittings were iron pipe thread into the valve. The PEX fittings will slip and rotate (with some difficulty) so I was able to unscrew them, and I was barely able to fit a mini tubing cutter around the copper to cut it. That's where this SharkBite fitting came in. With a bit of delicate attention to the end of the copper to make sure that it wasn't sharp, this fitting slid right over the copper and allowed me to tighten it into the valve body. Everything lined up like before and nothing leaked. This took all day, but that was due to the tiny opening that i had to work through. This SharkBite was the easiest to install (30 seconds) and everything is just as rigid as before. Well worth the money. My only concern was that there was a bit of solder on the pipe that I delicately filed off. After that I polished it off with 600 grit sandpaper to eliminate any possible remaining file marks. If there had been a solder bump or file groove, it is quite possible that would have resulted in a leak, since the sealing location point is to the outside of the pipe. In the end all worked out well, and I am satisfied.
Scritto da: Tom Holland PA
Easy
If you're as old as me and handy, you've experienced sweating copper pipe with lead solder then the newer lead-free, making sure there isn't a drop of water in the line and hoping, compression fittings with the slip on brass ring that may work. SharkBite fittings replace all other methods when working with copper and they work even when there is water in the line. Simply cut the pipe and push on the connector. Great in older homes and hard to reach places.
Scritto da: T Nielson
false advertising
It said it was a pack of 6, I only got 1
Scritto da: Synonymous
Working great so far
Used these on a hot water tank and they've been tight and dry for more than a year. Make sure you have no tension on the joint and the connection is straight. Recommended.
Scritto da: Mountain man.
Slips on easily and no leaks
Had to reduce 1 1/4” pex to 1”. Used the 11/4” shark bite with a reducer adapter on the end.
Scritto da: Super Dave
Works great, very long delivery time
First time using shark bite and I am thoroughly impressed. Easy fast and leak free. I’m selling my propane torch
Scritto da: Debashis Dey
New age fittings
Check Sharkbite fitting on the net and you would know how they can make your life easier for plumbing. This are all push type fittings and we use it extensively all across with CPVC pipes.
Scritto da: claude
exellent
who ever invented these should be made king

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array