Arnold (490-325-0012) Газонокосилка с передним колесом, 15 дюймов, универсальная посадка, 15

Brand:Arnold

3.5/5

128.44

Если вы хотите, чтобы ваше наружное силовое оборудование работало дольше и выполняло больше функций, вам нужны запчасти, аксессуары и навесное оборудование Arnold. Предоставляя вам широкий ассортимент высококачественных продуктов без проблем, Arnold Parts будет поддерживать все ваше оборудование в наилучшей возможной форме. Совместимость с множеством крупных брендов, 50 с лишним лет проверенной производительности принесли Arnold репутацию передовых инновационных продуктов и обширного инженерного опыта. От базового обслуживания до крупных инноваций, у Arnold есть все, что вам нужно, чтобы оборудование работало так, как оно должно работать сезон за сезоном. С Arnold вы можете быть уверены в надежном продукте с точной посадкой, дизайном, материалом и конструкцией. В дополнение к надежным запасным частям и аксессуарам, простые в использовании инструкции и дополнительные советы Arnold облегчат обслуживание вашего оборудования и обеспечат правильное выполнение работы.

Нет доступных единиц
В КОМПЛЕКТЕ: В комплект входит одно переднее колесо с ободом в сборе и оси диаметром 3/4 дюйма. Подробные инструкции по установке см. в руководстве по эксплуатации. НАДУВАЙТЕ ДОЛЖНЫМ ОБРАЗОМ: правильно накачанные шины служат дольше, обеспечивают лучшее сцепление с дорогой и помогают при ровной стрижке. Замените шину, если есть повреждения и видимый износ шины или если в шине снижается давление воздуха. ЗАМЕНА: Заменяйте спущенные или изношенные колеса газонокосилки каждый сезон, чтобы сохранить вашу машину в надлежащем состоянии. Протектор Turf Saver обеспечивает отличное сцепление с газоном и травой. УНИВЕРСАЛЬНОСТЬ: Подходит БОЛЬШИНСТВУ, но не всем Ariens, Craftsman, Cub Cadet, Husqvarna, John Deere, Poulan, Poulan Pro, Troy-Bilt и большинству газонных тракторов с передним колесом 15 x 6 дюймов и осью 3/4 дюйма. Шина имеет номинальную нагрузку 300 фунтов, протектор для защиты газона, нейлоновый подшипник и 2-слойный рейтинг. СОВМЕСТИМОСТЬ: Универсальный узел переднего колеса 15 x 6 дюймов для газонных тракторов Troy-Bilt, Craftsman и John Deere с осями 3/4 дюйма, заменяет M123810, GY20638, 634-05067. Универсальная деталь для колес начиная с 532106108, 532122073, M123810, GY20638, 634-05067, 734-0731 и 634-05066.
Brand Arnold
Country of Origin USA
Customer Reviews 4.5 4.5 out of 5 stars 1,485 ratings 4.5 out of 5 stars
Exterior Finish Machined
Is Discontinued By Manufacturer No
Item Diameter 15 Inches
Item Weight 7.85 Pounds
Manufacturer Arnold
Material Nylon
Product Dimensions 15 x 15 x 6.5 inches
Rim Size 15 Inches
Rim Width 6 Inches
Size 15"
Vehicle Service Type Mower
Wheel Backspacing 3.5 Inches
Wheel Size 15 Inches

3.5

12 Review
5 Star
73
4 Star
13
3 Star
7
2 Star
2
1 Star
6

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: B R
Changed my life!!!
This tire changed my life. Previously, I’ve been dragging my riding lawnmower around with a rope. Then somebody pointed out I could put tires on it! I didn’t believe this to be so, but I ordered tires from Amazon and it was incredible! I highly recommend these tires.
Scritto da: mcg 79
Fit cub cadet lt1046
Seems like this was just what I needed
Scritto da: Philip Byrd
Easy to mount.
It was the right fit.Easy to mount.
Scritto da: CoolBoomer
Nice Wheels & Tires Took 10 Minutes to Change
These came with a set of bushings and a spacer for each wheel so that they fit the two common different size spindles. The bushings are some sort of man-made material (nylon?) and the inboard ones have a grease fitting built into them. Another review mentioned putting the grease fitting on the outboard side--*no way*--the directions show the fitting side facing the mower not the outside. You still need to put on your outer washers, C-clip and dust cap. These came pre-inflated and look like good tires, every bit as good as the ones that came on my Murray tractor. Why mess with getting the inner tubes replaced and all when you can just pop these out of the box, swap them and be done with it. Hope this review was helpful.
Scritto da: J. Fox
Look good, but not a fit for all mowers mentioned
The tire arrived fully inflated and looks good. The install was relatively painless. However, these wheels are not to OEM spec for my mower, a 2012 LTX 4200 Cub Cadet, even though the description stated they are. The original Cub Cadet wheels have a deeper cylinder for the grease fittings and bushings. The result with the new wheel is that it cannot hold the grease fitting in place for long, even after I've hammered it in with a rubber mallet and added the C-clip. The grease fitting will come out of the cylinder in the middle of the wheel after driving about 50 feet. The result after the grease fitting comes out is a constant, annoying swealing. It also does not stay inflated for a reason I have yet to discover. MAKE SURE THIS WHEEL IS AN EXACT MATCH TO YOUR MOWER AND OEM NUMBER.
Scritto da: Franky Lynn
Very good "high flotation" wheel and tire update.
Very good "high flotation" wheel and tire. I honestly think this wheel and tire combo is almost overbuilt for anything a person might use it for. The tire is big and soft, yet holds air indefinitely. I need something to hoist a standby motor generator that weighs over 200 pounds, as well as other heavy items, so I am building an all electric "mobile derrick" which will have a tiltable A-frame, a tiltable boom on top of that, and a winch with 1800 pound rated cable for lifting things. This "mobile derrick" will be using the three Arnold 15-inch Lawnmower wheels that I have purchased. The tires are big enough to give my "mobile derrick" the ability to traverse soft ground. This wheel/tire combo does not come with any ball bearings, just cheap plastic bushings, one of which has a grease zerk molded into it for pumping grease inside the wheel hub. The Arnold wheel/tire combo is very heavy duty and well built, so if your wheel uses 3/4" O.D. bearings and they are still serviceable, then this wheel will probably work. In my application mentioned above, I am going to permanently mount the wheel onto 3/4" axles, and the axles will rotate on pillow bearings.
Scritto da: MnW
bushings wear out too fast
the bushings wear out very fast on these but our local people stopped selling them. they're more expensive than they should be but install fairly easily.
Scritto da: Draco76123
Perfect fit
Just bought a used Craftsman YT3000. Previous owner replaced one of the wheels with one that was a little thinner and not fitting the axle well so it wiggled around alot. This was a near perfect replacement. It matched the original perfectly and fit snug on the axle with the included spacers. The axle inserts are plastic with built in plastic grease fitting, took me a minute to figure out it was a grease fitting since I've never seen a plastic one before, but I won't remove a star for it. It took me less than 5 minutes to swap it out with the old one. Only time will tell regarding durability, I'm guessing the axle inserts aren't going to last nearly as long as metal ones, but we'll see, it could surprise me.
Scritto da: Shawn R
Very Impressed!
Was pleasantly surprised that the tires on these were the same as the originals on my garden tractor., Carlisle Turf- Saver. These come with plastic bushings instead of the original metal ones, so I am a little concerned about their longevity, but we'll see what they look like after a full season. The outside diameter of the hub is smaller than the original, so my original dust covers were too big. I was able to make the old ones work, at least temporarily, but will probably have to get proper ones at some point.
Scritto da: MJB Ontario
Good Quality
Just need to check the axel size will not work on 5/8 inch axel and does not include an adapter for that size.
Scritto da: Rod
Works
cannot grease it and cannot install cap.
Scritto da: Cam
poor quality
These wheels have cheap plastic bushings instead of bearings. I don't recommend.

Сопутствующие товары

hot
Насос Briggs & Stratton 311553GS
3.6/5

€ 261.30

Насос Briggs & Stratton 311553GS
3.6/5

€ 261.30

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array