Бесколлекторный двигатель E-flite Park 250 Outrunner, 2200 кВт: пуля 2 мм, EFLM1130

Name: Бесколлекторный двигатель E-flite Park 250 Outrunner, 2200 кВт: пуля 2 мм, EFLM1130
Brand: E-flite
SKU: 0605482587416
Price: 75.84 EUR
Availability: InStock

Brand:E-flite

2.8/5

€
75.84

Основные характеристики * Идеально подходит для 3D-моделей весом 4–6 унций (115–170 г), а также спортивных и масштабных моделей весом 6–12 унций (170–340 г) * До 55 Вт * Предназначен для крепления к брандмауэру или карбоновой трубе * Встроенный фиксатор опор дизайн * Чрезвычайно тихий и легкий — всего 0,5 унции (14 грамм) * Модернизированный двигатель для внутренних IPS и 180 двигателей * Высокомоментный, прямой привод альтернативы inrunners Качественная конструкция с шарикоподшипниками и валом из закаленной стали * Великолепный легкий аутраннер для небольших пенопластов в помещении. Требуется для завершения6–10A бесколлекторный ESC 2S Li-Po или 5–7-элементный Ni-Cd/Ni-MH 5,5 x 4,5–8 x 6 Slow Flyer propOverviewИдеально подходит для 3D-моделей весом 4–6 унций (115–170 г), спортивных и масштабных моделей весом 6–12 унций (170–340 г) или моделей, требующих мощности до 55 Вт.

Количество

добавить в корзину Купить сейчас

EAN: 0605482587416

Категории Дистанционные и управляемые устройства, Силовые установки и приводные системы, Электродвигатели и детали, Комплектные двигатели,

Чрезвычайно тихий и легкий — всего 0,5 унции (14 грамм). Интегрированная конструкция пропеллера. Предназначен для крепления к брандмауэру или к углеродной трубе. До 55 Вт. Идеально подходит для 3D-моделей весом 4–6 унций (115–170 г), а также спортивных и масштабных моделей весом 6–12 унций (170–340 г).

Brand	E-flite
Country of Origin	China
Customer Reviews	3.8 3.8 out of 5 stars 23 ratings 3.8 out of 5 stars
Horsepower	55 Watts
Is Discontinued By Manufacturer	No
Item Dimensions LxWxH	3.7 x 2.1 x 2.1 inches
Item model number	EFLM1130
Item Weight	0.05 Kilograms
Item Weight	1.6 ounces
Manufacturer	Horizon Hobby
Manufacturer recommended age	14 years and up
Material	Carbon
Product Dimensions	3.7 x 2.1 x 2.1 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены^*

Ваш рейтинг

Scritto da: Benjamin Mosher

Ridiculously fragile prop shaft, unreliable bearings, lousy mount.

I've bought two of these motors for my RC planes. They're light and fast as others have said, but even a minor crash will bend the prop shaft beyond repair. To give an idea, the last "fatal" crash my latest motor suffered involved a flat landing on the wheels in grass at about 15mph. The grass caught in the gear and the plane rolled up over its nose onto its back. The plane was a micro foam plane, weighing about 1/2 pound. The airframe was totally fine, but when I lightly throttled up to check the prop shaft alignment - sure enough, it now has a slight wobble. Also, as others have mentioned, the mount for this motor uses a shifty set screw that's slipped on me before due to vibration after the prop shaft got a tiny bit bent, resulting in the motor shooting out of the mount mid-flight, and the forcing an emergency landing (which further bent the dangling prop shaft). After my latest incident, I decided to rip the old plane apart and built a new plane using the motor as a pusher, hopefully to avoid any more incidents that could involve the prop shaft striking the ground in any way. Unfortunately, the vibrations from the prop shaft now appear to have damaged the bearings, so the motor tends to partially lock up at certain speeds. Overall, there are many better options out there both in terms of reliability and price. While the weight to performance for this motor is great, I can't recommend it over other 250 size motors. UPDATE: The new pusher plane ended up burning out the old motor completely after about a week of use. Replaced with Emax Mt1804 which works great, runs cooler, and doesn't have a wet strand of spaghetti for a prop shaft.

Scritto da: Doublebuck

Eflite park 250 motor 2200 KV

For it's size this is a potent motor. I was surprised by its performance for its weight but all of this comes at a price. First of all, it is expensive-more expensive than motors of the same or even higher output for its weight. The mount for this motor is rather odd. It is a tube that the rear of the motor fits into. Because this motor was used in a tractor position (the motor is forward in the plane) there is a tendency for the motor to pull out unless the mounting screw is really torqued down. The fragility of the motor makes this nerve wracking for me. The hair-like lead wires are very very fragile AND brittle and have broken off on two occasions. Soldering these microscopic wires are a chore to say the least.

Scritto da: Deborah Caley

Powerful little brushless motor.

E-flite never disappointed with the small size and power of this motor. I use theses for small 3D acrobatic planes.

Scritto da: fiacost

Excellent little motor.

Excellent little motor. I have this motor on a e-flite grasshopper and, as of today, I have flown the plane 87 times (I keep a fly record book) without problems. I only crashed the plane once but the motor did not suffer any damage.It is light but, it does the job right; at the end it is on a grasshopper and not in a Mig-21....I'm just saying ;>)

Scritto da: Dale R Bennish

Good motor

Good purchase, quality, and fast shipping. Thanks

Scritto da: Tampajock

great 30" inch modek foamie motor

works great on the light 31" models (170 or so grams)

Scritto da: none

Five Stars

an excellent buy.

Scritto da: Greg Smith

did not work

did not work returned for refund, but no problem returning

Scritto da: RenaissanceMan

Delivery time as promised, arrived in good condition

I read some reviews, which complained about the difficulty to push the shaft thru the rotor (modification). I use the lathe chuck together with the drill stock to move it, this always works fine.

Scritto da: calberc

Five Stars

Small but high power brushless motor. I put this one in a yak55 superlite series by RC factory.