Curt Manufacturing 55571 4-контактный жгут проводов для прицепа со стороны автомобиля, подходит для некоторых автомобилей Nissan Murano, черный

Brand:Curt Manufacturing

3.7/5

132.32

Если ваш автомобиль не оборудован проводкой для буксировки прицепа, заказная проводка CURT — идеальное решение. Специализированный жгут проводов, также называемый Т-образным соединителем, представляет собой простое электрическое устройство с функцией «включай и работай», которое подключается к электрической системе автомобиля и обеспечивает стандартное универсальное подключение проводки прицепа. Это делается с помощью двух или более OEM-совместимых разъемов для конкретного автомобиля, которые подключаются к узлу заднего фонаря, что устраняет необходимость резки, сращивания и пайки во время установки. Индивидуальные жгуты проводов изготавливаются для конкретных автомобилей, и, хотя они доступны не для всех автомобилей, они предлагают один из самых быстрых, простых и безопасных способов подключения автомобиля для буксировки. Этот конкретный жгут проводов имеет 4-контактный плоский разъем и предназначен для использования в качестве специального жгута проводов, подходящего для Nissan Murano определенных годов выпуска (чтобы проверить совместимость с вашим автомобилем, см. информацию о приложении). Он поставляется со всеми необходимыми компонентами проводки для обеспечения надежного соединения проводки прицепа, а также с пылезащитной крышкой для поддержания разъема в чистоте, когда он не используется. Вы представляете свой следующий пункт назначения — может быть, это лодка, причаливающая к вашему любимому месту рыбалки, может быть, это кемпинг с видом на один из шедевров природы, или, может быть, это следующая крупная стройплощадка. Однако, чтобы превратить эту картину в реальность, нужно больше, чем просто мечтать. Требуется надежное соединение и правильное количество энергии. Индивидуальная проводка CURT изготовлена ​​с использованием одной из самых сложных технологий в отрасли и предназначена для простой установки, обеспечивая долговечное электрическое соединение для вашей установки тягово-сцепного устройства.

СУПЕРОБЛОЖКА. Для обеспечения длительного использования и устойчивости к атмосферным воздействиям этот 4-контактный жгут проводов освещения прицепа поставляется с резиновым пылезащитным чехлом. Когда он не используется, он легко устанавливается на 4-контактный плоский разъем, защищая его от внешних воздействий. НАДЕЖНАЯ МОЩНОСТЬ. Этот 4-жильный жгут проводов прицепа изготовлен с использованием технологии поверхностного монтажа. Этот тип схемы генерирует меньше тепла, оптимальную интенсивность света и долговечность. ДЛЯ КОНКРЕТНЫХ АВТОМОБИЛЕЙ. Этот жгут проводов для вторичного рынка предназначен для автомобилей Nissan Murano некоторых лет. СТАНДАРТНЫЙ РАЗЪЕМ. Эта вставная 4-плоская проводка прицепа может использоваться для подключения задних фонарей прицепа, стоп-сигналов и сигналов поворота. 4-сторонняя проводка фонарей прицепа популярна на различных прицепах, добавляя универсальные возможности буксировки для вашего автомобиля. ЛЕГКО УСТАНОВИТЬ. Никакой резки! Никакого сращивания! Этот комплект жгута проводов прицепа подключается к существующей заводской проводке вашего автомобиля и оснащен стандартным задним 4-контактным разъемом проводки прицепа для подключения и буксировки прицепа.
Brand ‎Curt Manufacturing
Country of Origin ‎Mexico
Customer Reviews 4.6 4.6 out of 5 stars 181 ratings 4.6 out of 5 stars
Exterior ‎Painted
Is Discontinued By Manufacturer ‎No
Item model number ‎55571
Item Weight ‎12.8 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎55571
Model ‎Custom Wiring
OEM Part Number ‎55571
Product Dimensions ‎9 x 4 x 3 inches

3.7

13 Review
5 Star
78
4 Star
15
3 Star
4
2 Star
0
1 Star
3

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: Art in VT
Hooked up with no problems
Relatively easy install given the number of clips/nuts and panels that need to be removed to gain access to the wiring harness that it plugs into on each side. I didn't pay close enough attention to the details to note that it is a 4 pin connector, so does not have a connection for reverse lights (which I have on the back of my trailers hitch mounted rack). I'm hoping I can find the line to the backup lights for the needed fifth pin connection since the lights themselves are both mounted in the hatch lid. Once I find that I'll tag into it for a relay signal to turn on the trailer mounted lights with power directly from a fused line to the battery.
Scritto da: Maria
Very easy to install
It’s just as it stated , it was very easy to install
Scritto da: Amazon Customer
Perfect fit
Figment spot on
Scritto da: Wackadoo
Easy Install and Works Great!
When I first bought my 2011 Nissan Murano, I knew immediately that I needed a hitch, and really wanted a wiring harness with it as well so I could tow our pop-up camper for short/nearby camping trips. Problem was, Nissan wanted almost $600 to install a "factory" hitch and wiring harness. So, I immediately bought a "hidden hitch" for $115 and installed it with ease, but did not add the harness until recently because I didn't want to have to run a wire under the car from the back to the battery. The Curt T-Connector solves the wire-to-the-battery problem and installs with ease. I'm not exactly Johnny Fix It, so I just took my time, watched a youtube vid on how to do the install and followed along with the supplied instructions. Installation took about 1.5 hours total (again, I took my time because I didn't want to break a clip or scratch the interior or exterior of the car). Mission accomplished - everything went perfectly. I hooked up our pop-up camper today and brought it home - all lights worked perfectly, and the 10 amp fuse had no problems at all. So, for around $175, I was able to install a system that's "almost" as good as the factory version. I say "almost" because the factory wiring harness is attached to the hitch, but the Curt rests inside your spare tire compartment and hangs out the back of the car when being used. That's the only knock I have on the product, but it's something I can live with since I won't be using it all of the time. Great product, easy install, works as advertised, and saves a ton of money vs. a factory install. Highly recommend.
Scritto da: Lauren
Could not have been easier to install!
Anyone can install this wire set! Super fast delivery, high quality!
Scritto da: Steve R
As expected
Instillation instructions were a little vague and hard to understand. However, the install is very simply plug and play. No wire splicing easy install.
Scritto da: Midweste
Highly recommend this t-Connector - Exact fit and integration with OEM wiring!!
Ordered this T-Connector harness for my 03 Nissan Murano and it worked perfectly. The excellent instructions guided me through each step of the installation and were dead on accurate for my vehicle. This unit has the exact OEM Nissan connectors that snap in place tight and secure. Install time was around 20 minutes... There is also a step by step installation guide video on the Tube for those that need more visual instruction. Plugged in my trailer lights and all is good! The matching CURT 13571 Class III Receiver from Amazon is arriving tomorrow... Dealer wanted north of $500 for the parts and installation / Amazon price for both parts $175 with free 2-day Prime shipping!! NOTE: The T-Connector that is pictured shows rubber tubing with a grommet installed on the trailer wiring. This is not on the revised and updated unit I received. It is kind of overkill since the 4 prong plug is protected at the connection and comes with a weather boot. Very satisfied with my purchase
Scritto da: Ben
Easy to install
I agree with another user that it doesn't arrive as pictured. There is no grommet and tubing. However, per the instructions the connecter is supposed to be run under the tailgate or hatch when in use. That being said you don't these parts if you use it according to manufactures guidelines. I have a 2012 Nissan Murano and the installation was a breeze. It took about 15 mins for me to install and was extremely easy. The only thing that bothered me and reason for getting 4 stars in that it came with the wrong fuse. They supply a 10amp mini fuse and the vehicle uses a low profile. I went to the local parts store and purchased the correct fuse. Not a huge deal but it would have been nice to have the correct part.
Scritto da: C. Hildebrandt
Easy plug and play
I am happy with the product in general, nice that its a direct clip in unit. The instructions were good but I had to remove extra panels and do alot of "work by feel" due to no vision and short factory harness wires. Once installed and wires cleaned up everything went back together as it should and lights worked. There are full how to install video's available on Google with a quick search.
Scritto da: Amazon Customer
Very happy about the no cutting/splicing of wires
Very happy about the no cutting/splicing of wires. Everything connected very well. Would buy another kit from Curt. Took about 1.5 hrs start to finish with a few beverages in between.
Scritto da: Daniel Beattie
So easy to install
I loved how easy this was to install,,,Didn't like the price,,,but hey,,,in the long run,,,it was worth it
Scritto da: Will
Highly recommend this product
Product as described with quick and easy install.
Scritto da: Jerry Mugridge
Simple install
Vehicle specific light adapter, fit & works perfect. Instructions good but also U-Tube videos make install easy.

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array