Двойная форсунка Rain Bird 12DSH, угол распыла 180°, полукруг, расстояние распыления 9–12 футов

Brand:Rain Bird

3.7/5

23.37

ОПИСАНИЕ ПРОДУКТА Rain Bird 12DSH Двойное распыление 180° Полукруговая форсунка с соответствующей нормой полива, регулируемое расстояние распыления от 9 до 12 футов, траектория 23°. Эта специальная насадка оснащена двумя распылительными отверстиями для более точного полива и более равномерного распределения воды. Уникальная запатентованная конструкция с подрезкой сокращает время полива, расходует на 30 % меньше воды и снижает потери воды в ветреную погоду. Области, близкие к голове, получают равномерное покрытие, сводя к минимуму сухие коричневые пятна. Конструкция из коррозионностойкого пластика и нержавеющей стали для длительного срока службы. регулировочный винт из нержавеющей стали регулирует скорость потока от 1,8 до 2,6 галлонов в минуту и ​​расстояние распыления от 9 футов до 12 футов. Фиксированный паз для винта предотвращает проскальзывание отвертки во время регулировки. Форсунка распыляет в форме полукруга 180° с траекторией 23° и подходит ко всем дождевателям Rain Bird и адаптерам для кустарников. Мелкоячеистый сетчатый фильтр обеспечивает точную регулировку радиуса и защищает нижнее отверстие от мусора. Форсунки Rain Bird MPR, пользующиеся доверием на протяжении десятилетий, оснащены технологией распределения воды с согласованной нормой осадков. Форсунки с различными углами и радиусами можно смешивать в одной и той же зоне независимо от регулировки распыления и при этом поддерживать равномерную скорость распределения воды. Доступен широкий выбор форсунок MPR, поэтому распределение воды можно настроить в соответствии с уникальными и разнообразными потребностями вашего ландшафта. Форсунки MPR предназначены для обеспечения равномерного покрытия, гарантируя, что ваш газон будет всегда зеленым, без сухих или коричневых пятен. Доступны и другие форсунки MPR с двойным распылением (продаются отдельно): 360° полного (12DSF) и 90° четвертного (12DSQ) распыления. Rain Bird «Разумное использование воды» ОТ ПРОИЗВОДИТЕЛЯ Rain Bird Corporation — частная компания, основанная в 1933 году во время сельскохозяйственного бума в Калифорнии. Мы признаны производителем и поставщиком товаров и услуг для орошения №1 в мире. С офисами продаж по всему миру; мы предлагаем более 4000 водосберегающих продуктов для орошения в более чем 130 странах. С самого начала компания Rain Bird производила и предлагала широчайший ассортимент высококачественной ирригационной продукции для ферм, полей для гольфа, спортивных арен, коммерческих объектов и домов. За последние 80 лет компания Rain Bird получила более 450 патентов по всему миру. В том числе первый для орошения в 1935 году на нашем оригинальном разбрызгивателе с ударным приводом (патент США № 1 997 901), который произвел революцию в сельскохозяйственном производстве продуктов питания и открыл новую эру ирригации во всем мире. В 1990 году Американское общество инженеров сельского хозяйства назвало этот оригинальный дождеватель ударного действия исторической достопримечательностью. Наша продукция охватывает все аспекты орошения… таймеры/контроллеры, выдвижные роторные спринклеры, спринклеры с выдвижной головкой, спринклерные форсунки, ирригационные клапаны, капельное орошение, дренаж и многое другое. Эти продукты были выбраны и установлены по всему миру в крупнейших и самых престижных проектах по орошению жилых, коммерческих, сельскохозяйственных и гольф-полей. Компания Rain Bird привержена концепции «Разумное использование воды™», которая включает не только продукты, но и образование, обучение и услуги для промышленности и общества. Наше наследие заключается в разработке и производстве только продуктов высочайшего качества и ценности. Мы благодарны за получение многочисленных наград признания от многих наших уважаемых партнеров. Rain Bird «Разумное использование воды»

Изготовлен из высокопрочных материалов, устойчивых к ультрафиолетовому излучению и химическим веществам, что обеспечивает долгий срок службы. Регулировочный винт из нержавеющей стали регулирует скорость потока и расстояние распыления. Устраняет сухие коричневые пятна возле головок. Совместим со всеми выдвижными дождевателями Rain Bird. Полукруглый рисунок 180° с регулируемым расстоянием распыления от 9 до 12 футов. Использует на 30% меньше воды; уменьшает расход воды в ветреную погоду. Двойные распылительные форсунки для превосходного равномерного полива.
Brand Rain Bird
Color Brown/Black
Country of Origin USA
Customer Reviews 4.7 4.7 out of 5 stars 276 ratings 4.7 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 0.89 x 0.89 x 2.1 inches
Item model number 12DSH
Item Weight 0.022 ounces
Manufacturer Rain Bird
Material Stainless Steel
Product Dimensions 0.89 x 0.89 x 2.1 inches
Style Pop-Up

3.7

7 Review
5 Star
75
4 Star
20
3 Star
3
2 Star
0
1 Star
2

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: Eugene
Better near and far spray coverage
To adjust the spray distance and water output of this nozzle, turn the screw on top counterclockwise for an increase, or turn it clockwise for a decrease. To adjust which direction it sprays, you can remove the top of the sprinkler head and reinsert the nozzle tube. Some sprinkler heads are installed deep enough that pulling the top off is undesirable, so you can pull up the nozzle tube and twist it until it's rotated in the right direction. It should make clicking noises as it is turned. If there's no clicking, then you may be unscrewing the sprinkler from the pipe beneath it, or unscrewing the top of the sprinkler, so I prefer to turn it clockwise. I use this nozzle wherever I don't need an adjustable nozzle because it does a better job of providing even coverage both near and far. It works great wherever my sprinklers pop up high enough, which in my lawn requires at least a 4 inch sprinkler. I have a couple 2 inch sprinklers that don't come up enough, so the dual spray part of this nozzle sprays directly into the grass right next to it. It's not the fault of the nozzle, but a notification that I should swap out that sprinkler head. I've also found that this nozzle can directly replace some of the nozzles on my Orbit sprinklers. My only gripe with this nozzle, and all Rain Bird nozzles, is that the adjustment screw tightness has a lot of variation. Sometimes it's so tight that the nozzle must be pulled up and gripped tightly to adjust it, which results in a face full of water if you try this while the sprinklers are on, but other nozzles are loose enough that they can be adjusted just by turning the screw without holding onto the nozzle. Fortunately giving the adjustment screw a few turns to loosen it up before installing it is all it takes to resolve this minor issue.
Scritto da: Eugene
Good near and far spray coverage
To adjust the spray distance and water output of this nozzle, turn the screw on top counterclockwise for an increase, or turn it clockwise for a decrease. To adjust which direction it sprays, you can remove the top of the sprinkler head and reinsert the nozzle tube. Some sprinkler heads are installed deep enough that pulling the top off is undesirable, so you can pull up the nozzle tube and twist it until it's rotated in the right direction. It should make clicking noises as it is turned. If there's no clicking, then you may be unscrewing the sprinkler from the pipe beneath it, or unscrewing the top of the sprinkler, so I prefer to turn it clockwise. I use this nozzle wherever I don't need an adjustable nozzle because it does a better job of providing even coverage both near and far. It works great wherever my sprinklers pop up high enough, which in my lawn requires at least a 4 inch sprinkler. I have a couple 2 inch sprinklers that don't come up enough, so the dual spray part of this nozzle sprays directly into the grass right next to it. It's not the fault of the nozzle, but a notification that I should swap out that sprinkler head. I've also found that this nozzle can directly replace some of the nozzles on my Orbit sprinklers. My only gripe with this nozzle, and all Rain Bird nozzles, is that the adjustment screw tightness has a lot of variation. Sometimes it's so tight that the nozzle must be pulled up and gripped tightly to adjust it, which results in a face full of water if you try this while the sprinklers are on, but other nozzles are loose enough that they can be adjusted just by turning the screw without holding onto the nozzle. Fortunately giving the adjustment screw a few turns to loosen it up before installing it is all it takes to resolve this minor issue.
Scritto da: Dazzza
Great Replacement at Low Cost
These nozzles fit the 1800 series and UNI-Spray series sprinkler head bodies. They will also fit onto most other brands of sprinklers that use universal female thread nozzles. While Rainbird makes a wide range of nozzles, most are only available at specialty irrigation stores. Hardware stores and home centers tend to only carry a few of the most common nozzles. Rainbird makes a very good nozzle set with good water spray uniformity. Many of them have matched precipitation rates so you can mix different radius and pattern nozzles on the same valve zone without messing up the water application uniformity. Be careful of this as Rainbird's literature calls all of their nozzles "matched precipitation rate", but that does not mean they are all compatible with each other! For example, you should not use a 4 series VAN nozzle on the same valve circuit as a 5 series MPR nozzle. Read the nozzle descriptions for each series of nozzles below for details on which nozzles are compatible. The spray radius can be reduced up to 25% on all but a few specialty bubbler nozzles using a screw on top of the nozzle. Note that the separate screen must be installed under the nozzle for the radius adjustment to work correctly. If you remove or don't install the screen you won't be able to adjust the radius. The screens are provided with the nozzles when you purchase them. All Rainbird nozzles are constructed of high-quality plastic.
Scritto da: Padmapada
Easy fix for a damaged sprinkler head, saved lots of $$$
The folks who cut my grass tend to cut the heads off the sprinklers with their machines. In the past, I've called the sprinkler company to fix them, and ended up paying hefty service calls. This time I had a look and saw that the damaged head simply unscrewed. So I went to the local big box store and tried to find a replacement. The clerk tried to talk me into buying something that had threads on the OUTSIDE because, I guess, that is what he had in stock. But I needed a head with threads on the inside, one that would just screw down on top of the pop-up pipe. I saw this on Amazon and asked other customers if it had threads on the inside, and the answer was positive. So I bought this, and it took about 2 minutes to install. The head is clearly marked so that you can see which way the spray goes (this is a half circle), and there is a screw on top to reduce the diameter if you want. It is installed in the berm, or tree lawn, or verge, or curb strip, or whatever you call that narrow strip of lawn between the sidewalk and the street. Perfect. Good for all dialects.
Scritto da: Cindy
Good product
Product fit as described
Scritto da: Amazon Customer
Performance met the product description.
Did a lot better than the water savors you can buy.
Scritto da: Brenda Brennan
Perfect fit
Perfect to replace broken sprinkler head.

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array