GE WR17X10734 Оригинальный резервуар для воды OEM в сборе для холодильников GE

Name: GE WR17X10734 Оригинальный резервуар для воды OEM в сборе для холодильников GE
Brand: GE
SKU: 0789911963023
Price: 196.18 EUR
Availability: InStock

Brand:GE

3.5/5

€
196.18

ОПИСАНИЕ ПРОДУКТА Этот высококачественный подлинный резервуар для воды OEM GE Appliances в сборе (WR17X10734) удерживает воду для диспенсера для воды по мере того, как вода охлаждается. Сборка резервуара для воды также называется сборкой резервуара для воды и трубок. Имейте в виду, что перед установкой узла резервуара для воды рекомендуется отключить прибор от всех коммуникаций. ОТ ПРОИЗВОДИТЕЛЯ Это оригинальная сменная деталь, номер модели и название следующего элемента: General Electric (GENF0) WR17X10734 Резервуар для воды в сборе

Количество

добавить в корзину Купить сейчас

EAN: 0789911963023

Категории Appliances, Аксессуары для крупной бытовой техники,

С уверенностью ремонтируйте свое устройство, выбирая оригинальные запасные части и аксессуары GE Appliances. Высококачественный узел бака для воды холодильника GE Appliances OEM WR17X10734 изготовлен из высококачественных материалов, обеспечивающих долговечность и точную посадку. При установке этой детали обязательно следуйте инструкциям в руководстве пользователя. Узел резервуара для воды холодильника GE Appliances WR17X10734 также называется резервуаром для воды и узлом трубопровода. Сменный блок бака для воды холодильника GE Appliances удерживает воду для диспенсера для воды по мере того, как вода охлаждается. Узел бака для воды GE Appliances WR17X10734 является оригинальной деталью OEM (производителя оригинального оборудования), разработанной и спроектированной в соответствии с точными спецификациями.

Batteries Included?	‎No
Batteries Required?	‎No
Country of Origin	‎China
Customer Reviews	4.5 4.5 out of 5 stars 36 ratings 4.5 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎WR17X10734
Item Package Quantity	‎1
Item Weight	‎1.55 pounds
Manufacturer	‎General Electric
Part Number	‎WR17X10734
Product Dimensions	‎18.1 x 9 x 4.5 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены^*

Ваш рейтинг

Scritto da: voiceofsensibility

Looked around and decided this was the place to purchase

First of all, this item is for a GE side by side refrigerator with a water and ice dispenser in the door. It may very well fit other brands as well. I must say first of all, the part is the exact same GE factory part that came in a sealed GE factory box identical to the old one down to the length of the tubing which was the perfect length and required no cutting. Not some knock-off from china. The box was inside of a nicely packed larger shipping box. This part shows available on many other internet appliance parts sites, but most do not indicate whether it actually is GE oem parts or some cheap knockoff with possibly the wrong size tubes. One of the reasons I wrote this is because the description here on Amazon says very little and really only mentions the part number. This is the water tank that is located on the inside of the refrigerator on the back wall behind the produce draw. The small tank allows the water a chance to cool down before it is dispensed through the door. The tank is fastened to the back wall with two philips head screws. Two polyethelene tubes come fixed on the tank. The shorter is the tank entry tube which litterally slide fits snug (without the need of any tools) into the soleniod valve at the back of the refrigerator. The longer exit tube goes underneath the refrig to the front slide fitting below the door with the water and ice dispenser. The reason I replaced this part is that the polyethelene tubing had developed tiny cracks that allow very subtle water leak and allowed air into the tubing. The cracks developed in two seperate areas where the tubing had bends in it. First I began to notice that the water dispenser had a slight water dispensing delay. At first I though it maybe a failing water valve soleniod. Low and behold the culprit was the fine cracks in the bends of the tubing at the back near the solenoid valve. It took me about 40 minutes to remove the old tank and tubing and install and run the new tubes in the exact same manner. After it was installed, I thoroughly tested the dispenser to make sure there were no leaks at the tube fittings. Remember to always unplug the electrical cord when inspecting the water features of the refrigerator. Good luck.

Scritto da: jmoar

OEM quality - perfect

installed very easy and works perfectly. Highly recommended.

Scritto da: Anonymous

Amazon delivery is faster than my service call.

My old one cracked at the tube due to its age. The plastic tube is integrated with the tank. Replace the entire assembly, don't just replace the tube. GE adds premium on the price, but overall still cheaper than making service calls.

Scritto da: MaxBurn

Fixes the leak but not the real problem

If you find yourself here looking for this do yourself a favor and check your air inlet damper! The air inlet damper has a little door that lets the cold air in the freezer into the refrigerator. The common problem with these refrigerators is that the damper door breaks off and lets way too much cold air in effectively freezing the refrigerator section. Once the water tank is frozen the expanding ice in it cracks the case of the water tank spilling water inside the refrigerator, which is likely why you are here looking for this. As far as the water tank here goes it isn't too difficult to replace and doesn't require any more than the common hand tools you likely already have. I found this to be a direct replacement.

Scritto da: Francisco J. Acosta

Fits description and easy to install

Easy to install, product as described

Scritto da: C D Smith

it's actually the right replacement part.

It worked!

Scritto da: Christiane

Great OEM Part from GE.

I'm a do it myself kinda girl and this was easy to replace. I could have paid less but but this one was OEM part and it's important to me. Keep all your screws, padding and foam from your original because those are not sent with the new piece, in case you missed that.

Scritto da: Maureen

Exellent seller!!

I ordered this for my in-laws fridge. They installed it with no problem but found that it had a pinhole leak. I contacted the seller and they said to disgard the damaged one and they shipped me a replacement that I received in just a couple of days. Everything works great, and would not hesitate to purchase from this seller again!