Инструмент для установки и демонтажа эмиттера капельного орошения Rain Bird ET/1PK25S Комбинированный инструмент для установки/демонтажа эмиттера — установка/снятие

Brand:Rain Bird

3.4/5

27.63

ОПИСАНИЕ ПРОДУКТА Инструмент для установки и снятия капельницы капельного орошения Rain Bird ET/1PK25S. Удобный многофункциональный инструмент прокалывает капельную трубку 1/2” и устанавливает капельницы/эмиттеры Rain Bird или фитинги 1/4” одним быстрым действием. Быстро устанавливает или снимает эмиттеры точечного полива Rain Bird, фитинги с шипами 1/4 дюйма и заглушки для трубок 1/4 дюйма. Просто поместите излучатель или фитинг в специальное отверстие в конце инструмента; вдавите зазубренную точку в боковую стенку 1/2 трубки. Вытащите инструмент, оставив эмиттер или фитинг в трубке. Теперь вы готовы надеть трубку на 1/4 на установленный эмиттер или фитинг. **Совет по установке: для облегчения проникновения в капельную трубку 1/2 слегка поворачивайте ее при вставке зазубренных эмиттеров 1/4 или фитингов. Этот метод уменьшает необходимое усилие, направленное вниз, предотвращая сплющивание трубки, которое может вызвать проникновение через противоположную сторону. Для снятия эмиттеров или фитингов используйте паз на боковой стороне инструмента. Чтобы вставить заглушки для герметизации отверстий в 1/2 капельной трубке, используйте большее отверстие, расположенное на конце ручки инструмента Emitter Tool. Заглушки Rain Bird имеют небольшие выступы, которые надежно удерживают их в инструменте; эти гребни слегка сглаживаются, когда заглушка вставлена, что позволяет легко установить ее в трубку. Хорошо заметный пурпурный цвет позволяет легко увидеть инструмент в траве, почве, коре, мульче и т. д. Rain Bird «Разумное использование воды». ОТ ПРОИЗВОДИТЕЛЯ Rain Bird Corporation — частная компания, основанная в 1933 году во время сельскохозяйственного бума в Калифорнии. Мы признаны производителем и поставщиком товаров и услуг для орошения №1 в мире. С офисами продаж по всему миру; мы предлагаем более 4000 водосберегающих продуктов для орошения в более чем 130 странах. С самого начала компания Rain Bird производила и предлагала широчайший ассортимент высококачественной ирригационной продукции для ферм, полей для гольфа, спортивных арен, коммерческих объектов и домов. За последние 80 лет компания Rain Bird получила более 450 патентов по всему миру. В том числе первый для орошения в 1935 году на нашем оригинальном разбрызгивателе с ударным приводом (патент США № 1 997 901), который произвел революцию в сельскохозяйственном производстве продуктов питания и открыл новую эру ирригации во всем мире. В 1990 году Американское общество инженеров сельского хозяйства назвало этот оригинальный дождеватель ударного действия исторической достопримечательностью. Наша продукция охватывает все аспекты орошения… таймеры/контроллеры, выдвижные роторные спринклеры, спринклеры с выдвижной головкой, спринклерные форсунки, ирригационные клапаны, капельное орошение, дренаж и многое другое. Эти продукты были выбраны и установлены по всему миру в крупнейших и самых престижных проектах по орошению жилых, коммерческих, сельскохозяйственных и гольф-полей. Компания Rain Bird привержена концепции «Разумное использование воды™», которая включает не только продукты, но и образование, обучение и услуги для промышленности и общества. Наше наследие заключается в разработке и производстве только продуктов высочайшего качества и ценности. Мы благодарны за получение многочисленных наград признания от многих наших уважаемых партнеров. Rain Bird «Разумное использование воды»

Хорошо заметный пурпурный цвет позволяет легко увидеть инструмент в траве, почве и мульче/коре. Отверстие в верхней части ручки устанавливает заглушки для герметизации отверстий в трубке 1/2. Выемка сбоку позволяет легко снимать фитинги, эмиттеры и заглушки. Для облегчения установки эмиттеров и фитингов 1/4 в трубку 1/2 слегка поворачивайте их при вставке. Обеспечивает простое одношаговое применение капельниц/эмиттеров Rain Bird, фитингов 1/4 и заглушек для шлангов. Быстро устанавливает и снимает капельницы/эмиттеры Rain Bird, фитинги с зазубринами 1/4 и заглушки для трубок.
Country of Origin Mexico
Customer Reviews 4.4 4.4 out of 5 stars 1,442 ratings 4.4 out of 5 stars
Is Discontinued By Manufacturer No
Item model number ET/1PK25S2
Item Weight 0.009 ounces
Manufacturer Rain Bird
Product Dimensions 1 x 0.63 x 1.58 inches

3.4

13 Review
5 Star
69
4 Star
14
3 Star
8
2 Star
3
1 Star
6

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: Sandra
made my job easier
it made my job easier
Scritto da: Angel Douglas
Very small so dont lose it, worked good for what It was needed for
I only worry about losing this, but i put it on a key ring and will be fine. Worked like a charm to make smaller to larger holes in seconds. I needed this exact tool for the job.
Scritto da: JS
Slow shipping.
Works great
Scritto da: Bàká Hään
Useful tool
We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this tool in order to push the barbed end of the emitters into the 1/2 in tubing. + Good price. + Very easy to use. Snap the colored side of the emitter into the middle of this tool. Then use the leverage of the tool to push the black barbed end of the emitter into the hole you punched into the 1/2 in tubing. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.
Scritto da: Bàká Hään
Useful tool
We bought a new house and the backyard sprinkler system was broken beyond repair. Even with professional help, I was unable to locate the sprinkler valves for the back yard. So instead I set out to research and install my own drip irrigation to automate the watering process, mostly because I am way too lazy to water my backyard every other day. I chose the rainbird family of products because of the positive reviews and the plethora of options. I chose drip emitters for the trees and shrubs in my yard. I chose 1/2 in tubing for the systems backbone. Then 1/4 in tubing to run out to the individual plants, flowers, trees, shrubs... There are two ways you can install them. You can install them straight into the 1/2 in tubing, like I did. The other way is to install a 1/4 in coupler into the 1/2 in tubing, then run a 1/4 tube to the plant. Then connect the drip emitter at that end. I chose this configuration because some people complain about the water pressure pushing the emitter off the end of the tubing. I bought this took in order to connect the 1/2 in tubing with the Tee and elbow fittings. + Good price. + Very easy to use. Use this to flare the ends of the 1/2 in tubing. Then snap the fitting into the tool and use it to push the tubing onto the barbed end of the Tee or Elbow. I personally dislike special tools, but they are only a couple bucks each. I saved a ton of money by doing this project myself ($250 total cost), so to me it was worth it to get this specialized tool. + Very happy with the performance so far. - Nothing thus far. I am very happy with the performance of this tool. Ill update this review as necessary.
Scritto da: Flamsteed
I needed his
I had been using a heat gun to soften the tubing end before inserting the fittings This tool works and makes the job so much easier…and I don’t have to run an extension cord.
Scritto da: JNK
Blade works great, hole punch not so much
The blade part works great for cutting irrigation hose (I've used it on both 1/2 and 1/4 inch to equal effect), but that's not really hard as any scissors would do the same. I mostly got this to have the cutting and hole punching on one tool, but unfortunately, I have yet to have the hole punch work well. Perhaps I'm not doing it right, but if so, then how this should be used must be very convoluted.
Scritto da: Saeng Fio Chao
Great handy tool
With all others tool, I find this is the best one
Scritto da: Ed
Don't forget the tool!
I ordered a RainBird drip irrigation system, part by part, to water my vegetable garden (with large raised beds). One of the challenges we face is that we move the vegetables from bed to bed each year, and so it used to take a lot of time to adjust and rebuild our old system as the plants changed places. With my new RainBird system I was able to set up a single long 1/4" drip tubing (with 6" hole spacing) for each bed so that it can be laid out quickly around all the plants, the closer the spacing the more water etc.. The backbone of the system is a 1/2" main line where I used a bunch of T's and L's to smoothly run the main pipe under the soil, popping up a branch over the edge of each raised bed. I used 1/4" barbed coupling fittings (get the purple RainBird tool for these!) to connect the 1/4" drip tubing to the 1/2" main line branches. All connections went together really well, the pieces are consistent, I have not found any leaks, and best of all I was able to install on my own in under 2 hours, including burying the main line pipe! I am very satisfied, and would strongly recommend this product.
Scritto da: Annette Dreger
Very easy to use
Worked as excepted--makes nice straight cuts and proper sized holes for the barbs!!
Scritto da: Amazon Customer
retour imposible
J'ai voulu le retourner car il venait déjà avec le kit rainbird mais le vendeur il ne voulait aucun retour de cette item
Scritto da: DP Kindle Customer
It works!!
Love!! It works giving you more leverage to insert the tiny barbed connector and emitters!! Saves my fingers, well worth the price!!
Scritto da: rferraro
Product description is misleading
I bought this tool to use with 1/4 barbed fittings as is indicated in the amazon.ca description. The barbed fitting end DOES NOT fit into the hole so that you can insert the other barbed end into the hose. I'd like to return it bit this item is not returnable for some reason. Useless for me....

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array