Карбюратор Briggs & Stratton 390323 заменяет 394228, 299169

Name: Карбюратор Briggs & Stratton 390323 заменяет 394228, 299169
Brand: Briggs & Stratton
SKU: 0024847808940
Price: 236.26 EUR
Availability: InStock

Brand:Briggs & Stratton

3.3/5

€
236.26

Держите его в рабочем состоянии - держите его подлинным. Помогите своему наружному силовому оборудованию работать с максимальной производительностью, заказав запасные части и детали для обслуживания Briggs & Stratton. Вы можете найти нужную деталь, включая карбюраторы, воздушные фильтры, свечи зажигания, комплекты для настройки и другие детали для ремонта двигателя. Только оригинальные запасные части Briggs & Stratton специально разработаны в соответствии со стандартами OEM, изготовлены и испытаны для обеспечения оптимальной производительности двигателей Briggs & Stratton. но их использование гарантирует, что двигатель Briggs & Stratton, на котором они установлены, соответствует применимым нормам выбросов (EPA).

Количество

добавить в корзину Купить сейчас

EAN: 0024847808940

Категории Patio, Lawn & Garden, Электроинструменты для улицы, Запасные части и аксессуары, Запчасти и аксессуары для газонокосилок, Аксессуары для газонокосилок, Комплекты для тюнинга,

Заменяет старые детали Briggs № 394228, 299169. Оригинальная деталь Briggs & Stratton. Ручной дроссель. Оригинальный Briggs & Stratton, номер по каталогу 390323.

Customer Reviews	4.3 4.3 out of 5 stars 43 ratings 4.3 out of 5 stars
Is Discontinued By Manufacturer	No
Item model number	390323
Item Weight	15.8 ounces
Manufacturer	Briggs & Stratton
National Stock Number	2910-01-021-4244
Product Dimensions	1 x 7 x 8 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены^*

Ваш рейтинг

Scritto da: drew

Poor quality control and a bit expensive but does work.

I was dissapointed with this carburetor. I ordered the genuine B+S part and paid a significant premium hoping for a hassle free swap. Unfortunately the threads for the fuel inlet were poorly done and I had to clean them up with a tap before it could be used. This is too expensive to have quality problems. I think next time I might consider a knock-off carb and save $100 if I am going to have to mess with it to make it work anyway. Still giving it three stars because once I cleaned up the threads and installed it the equipment fired up and ran fine.

Scritto da: Julia loves Amazon

Saved us a lot of money

We had a used generator that was a real deal at under $200. 3000 watts. But after about a year it wouldn't start. We bought this replacement carburetor for $150.00 and it started first pull. Not bad deal. For less than $400 we have a generator that is nearly as good as ones costing several thousand. Now if the electricity goes off we're going to be O.K.

Scritto da: JEFFREY G.

Go OEM or Go Back and Get Another One

After wasting 2 purchases on cheap Chinese knock-offs that didn't work (one leaked gas and the engine wouldn't start at all, the other ran rough and weak no matter how much tuning was done), this one has been working flawlessly for weeks. I was a little skeptical when it showed up because it smelled faintly of gas (was it used?), but it's worked great.

Scritto da: Charley Doolittle

????

worked perfect. a hard item to find, thankyou????

Scritto da: Bob Hughes

Okay - on further review, this is junk!

I wrote a prior, positive review, based on the relatively easy initial installation of this carburetor. After a week, I have a different reaction. As I tried to adjust the air/fuel mixture, I found that the set screw was jammed and wouldn't back off more than one full turn. So I loosened the lock nut on the set screw and slid the valve out. What I discovered was that one of the o-rings had been improperly installed, and that it was twisted in place, making the valve stick, Once I got that straightened, I re-installed the assembly, only to have the stem break because the metal was weak. What a piece of junk!

Scritto da: Movelda Hyer

Works great - first time, everytime.

I could not be happier. It bolted right up. My tiller started immediately and still runs like a top. I would definitely recommend this product to anyone, friends, family or reading public.

Scritto da: fishpick

Instant new life for an older tiller

Install takes about 15 minutes - 3 bolts. Once installed - the tiller started up and ran better than it ever has. Should have done this years ago.

Scritto da: Stream Hiker

Easy as pie - Pre adjusted

Pulled the old one off, installed the new one, pulled the cord and viola! Purrs like a kitten and I didn't even have to adjust the new carb...it was pre-adjusted perfectly. A great replacement part here. I recommend it.

Scritto da: Amazon Customer

Dont biy it

Paid for 3 day shipping and got it in 8 days. Installed it and gas peed out of the choke . Junk