Klein Tools VDV001-081 Многоразовая отвертка, перфорированная отвертка Многофункциональный инструмент байонетного типа с усиленным лезвием Barrek для хранения бит Многофункциональный инструмент с безударной перфорационной отверткой

Brand:Klein Tools

3.5/5

59.29

Многогранная отвертка / гайковерт Klein Tools с перфоратором позволяет вручную пробивать настенные домкраты и патч-панели. Благодаря механической обработке инструментальной стали для большей прочности этот продукт поставляется с несколькими насадками, облегчающими вашу работу. Вал вмещает 4 универсальных наконечника и трансформируется в 2 размера гаечного ключа и 1 шестигранный ключ. Отлично подходит для использования на 110 терминалах/патч-панелях и 66 патч-панелях. Многофункциональный инструмент с уникальным наконечником для врезки разъемов и патч-панелей. Наконечники с прорезями 3/16 и 1/4 дюйма; Советы Phillips №1 и №2. Преобразуется в торцевой ключ на 1/4 и 3/8 дюйма и шестигранный ключ на 3/8 дюйма. Рукоятка Cushion-Grip для большего крутящего момента и повышенного комфорта. Tip-Ident для быстрой идентификации инструмента. Две крестовые отвертки: №1 и №2. Два наконечника отвертки со шлицем: 3/16 дюйма (5 мм) и 1/4 дюйма (6 мм). Два гайковерта: 1/4 дюйма (6 мм) и 3/8 дюйма (10 мм). Более 160 лет компания Klein Tools производит профессиональные ручные инструменты премиум-класса, которые обеспечивают производительность, долговечность и точность, необходимые для качественного выполнения работы. Наша семья инженеров, рабочих и мастеров продолжает вкладывать знания шести поколений в каждый инструмент, который мы создаем, используя только материалы высочайшего качества, превосходное качество изготовления и сохраняя производство как можно ближе к дому. Кляйн — это не только название нашей компании, но и наша фамилия. А так как мы американская компания, которой владеет и управляет семья, вы знаете, что можете рассчитывать на то, что мы будем здесь завтра. Klein Tools не просто производит отличные продукты, мы делаем отличные продукты, отвечающие требованиям профессионалов, которые используют их каждый день... С 1857 года.

Нет доступных единиц
Tip-Ident для быстрой идентификации инструмента. Рукоятка Cushion-Grip для большего крутящего момента и повышенного комфорта. Гнездо байонетного типа (с поворотом и замком) подходит для забивных лезвий большинства производителей. Прочный корпус отвала обеспечивает хранение бит. Биты из стали, обработанные механическим способом, для превосходной прочности. Безударная заделка проводов. Многофункциональный инструмент с отверткой Punchdown Screwdriver заделывает и разрезает провод за один прием с помощью комбинированного режущего лезвия 110/66 и прецизионно отшлифованной режущей кромки.
Batteries Included? ‎No
Batteries Required? ‎No
Blade Length ‎3 Inches
Brand Klein Tools
Brand ‎Klein Tools
Color Multi
Color ‎Multi
Country of Origin ‎Taiwan
Customer Reviews 4.5 4.5 out of 5 stars 654 ratings 4.5 out of 5 stars
Head Style Phillips
Head Style ‎Phillips
Included Components ‎VDV001-081
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH ‎8 x 1.5 x 1.5 inches
Item model number ‎VDV001-081
Item Package Quantity ‎1
Item Weight ‎0.3 Pounds
Item Weight ‎4.8 ounces
Manufacturer ‎Klein Tools
Material Blend
Material ‎Blend
Model Name ‎VDV001-081
Number of Handles ‎1
Number of Items 1
Number of Items ‎1
Number Of Pieces ‎1
Part Number ‎VDV001-081
Product Dimensions ‎8 x 1.5 x 1.5 inches
Size ‎One Size
Style ‎Multi-tool with Non-impact Punchdown

3.5

13 Review
5 Star
78
4 Star
9
3 Star
3
2 Star
4
1 Star
7

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: Paul Sretavong
Got A Lot Of Use, But Broken Spring Like Others
Overall, this is a great punch down tool. But like other reviews, the spring in mine broke as well. I at least got about a years worth of daily usage before the spring gave out in the middle of a punch. For the price, you would expect it last longer.
Scritto da: John Miller
Punch down works
It doesn’t click like a normal punch down tool but great since I can’t find my other one and the cost is much less than a replacement ideal punch down. This might not be great for a big job but for one or two it’s awesome
Scritto da: Manuelita Irma Di Rocco
Neat tool
This was a recommendation by my son, who installs cable. I was intent of doing a job for myself without hiring someone to do it. This was a great handy tool to punch down the CAT wires into a wall ate which I had ran thru the attic from a router to an area I needed a hard wire outlet plate to be. Female determination.
Scritto da: Brandon barkley
Almost perfect
Would get a 5 out of 5 if the bits stayed in better..
Scritto da: James Greco
Best punch down tool I have used
Quality
Scritto da: Pattylew
The punch died.
After about 500 punches the spring died. Hopefully it's not just mine...
Scritto da: David M.
Well-made and mostly efficient tool
I bought this to install Cat6 and RJ11 Keystone jacks for our home network and a corded phone extension. It worked almost perfectly - just make sure that, when you're pushing down on the tool, you hold it at 90 degrees to the jack, otherwise it may either damage the small prongs in the jack or just not push the wire in properly. The integral wire cutter didn't always cut completely through the protruding wires, but they were easy to break off afterwards. It's a nicely-made tool (as usual for Klein), with a strong pouch to store it.
Scritto da: ARIZAI
Quality spring
Bought it a couple weeks ago . After a few days of work the spring gets jam every 2 to 3 punches down the line, very disappointed
Scritto da: GURUTECH
Perfect for what I need it for Quality is superb
Perfect for what I need it for Quality is superb
Scritto da: Dave P
nice looking punch down tool that does not cut it!
I run a data installation company with 4 skilled data engineers our existing krone tools are getting worn out with constant use around 1,000 per day we perchased 1 of these tools, to try out, as they have a good reviews in the states. the tool duly arrived i gave it to the engineers, try this and tell me what you think, well to say that they were NOT happy is an understatement, comments not fit to post here !!!! I have also tried punching with the klien tool i agree with my engineers the unit punches the cat7/cat6/cat5 really well BUT it does not cut the ears of the cables after punching into the krone point i did sent an email to the uk stockist but after a long wait still have not had a reply we have tested the punch tool with variouse units but it still does not pass the test fluke have a simular unit and it has the same issues not cutting i hope my review shakes some trees and a responce from klien toolsis forth coming
Scritto da: John S.
The tool is not as good as Klein make out.
The terminating tool for the Cat6 cable is useless.
Scritto da: Lyle
Will not last even 5000 punch downs.
I purchased this to replace my cheaper quality punch down tool. This lasted 1 year and a half, and the spring broke on the inside and won't punch down. I purchased thinking thr klein punch down was better, my so call cheaper quality had out lasted this klein tool. What a huge disappointment, will buy a different more quality brand. Do not purchase.
Scritto da: Don Thomson
Compression punch broke after only 8 months of use.
I'm in the cabling business - myself and my business partner both had this same tool and both failed almost at the same time due to the compression part of the tool breaking. The tool is only 8 months old. If it didn't break I would have likely given it 5 stars as it worked good up until now. I expected better from Klein Tools. Also the fact that another user and also my business partner had the same exact failure shows this is NOT a one-off defect, but an inherint defect with this punch tool. I have a back up that is not so nice on ergonomics, but it is over 10 years old and still working.

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array