Комплект отделки для ванны и душа Moen Eva из полированного никеля с ручкой для душа в ванной для легкой регулировки температуры воды, сменной ручкой для душа (требуется клапан Posi-Temp), T2131BN

Brand:Moen

3.7/5

146.74

ОПИСАНИЕ ПРОДУКТА Ручка для душа Moen Eva с изогнутым переходным дизайном привносит современную элегантность в вашу ванную комнату. Отделка Brushed Nickel обеспечивает слегка матовый теплый серый металлик. Отделка Eva оснащена рукояткой с одним рычагом, которая позволяет легко регулировать температуру воды. На нем есть маркировка, указывающая на горячее и холодное. Эта ручка для душа построена на основе общей системы клапанов Moen M PACT, которая позволяет в любое время обновлять стиль без замены сантехники (клапан M PACT продается отдельно). Он также совместим с клапаном регулирования давления PosiTemp (продается отдельно), который помогает поддерживать температуру воды. ОТ ПРОИЗВОДИТЕЛЯ Коллекция Eva предлагает элегантный переходный дизайн, который придает современному дому вневременную привлекательность. Зауженные, утонченные линии Eva создают образ, который никогда не выйдет из моды. Клапан 2570 в этот комплект не входит; См. номер детали Moen T2131BN-2570 для комплекта, включающего клапан.

Нет доступных единиц
БАЛАНСИРОВКА ДАВЛЕНИЯ: Клапан Posi-Temp (продается отдельно) помогает поддерживать давление и температуру воды, даже когда используются другие источники воды в доме. СООТВЕТСТВУЮЩАЯ КОЛЛЕКЦИЯ: сочетается с другими смесителями и аксессуарами из коллекции Kingsley. ДОЛГОВЕЧНАЯ ГИБКОСТЬ: Построен на общей системе клапанов Moen M-PACT, что позволяет вам обновлять стиль смесителя в будущем без замены сантехники. ТРЕБУЕТСЯ КЛАПАН: Для завершения установки этого комплекта трима требуется клапан № 2510, 2520, 2570 или 2590. ТЕПЛЫЙ И ПРИГЛАШАЮЩИЙ: отделка матовым никелем придает слегка матовый теплый серый металлический вид.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Moen
Color ‎Brushed Nickel
Country of Origin ‎China
Customer Reviews 4.6 4.6 out of 5 stars 447 ratings 4.6 out of 5 stars
Domestic Shipping Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
Exterior Finish Nickel
Finish ‎Brushed Nickel
Included Components ‎Faucet Trim Kit
Installation Method ‎Wall Mounted
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer ‎Yes
Item Dimensions LxWxH 7.88 x 7.75 x 4.5 inches
Item model number ‎T2131BN
Item Package Quantity ‎1
Item Weight ‎1.38 pounds
Manufacturer ‎Moen Incorporated
Number of Handles ‎1
Part Number ‎T2131BN
Product Dimensions ‎7.88 x 7.75 x 4.5 inches
Size ‎1 Count
Style ‎Transitional
Warranty Description ‎Limited Lifetime Warranty

3.7

11 Review
5 Star
78
4 Star
12
3 Star
5
2 Star
2
1 Star
4

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: happysam
Moen Eva brushed nickel shower trim kit - works fine
Plumber installed it for us. The trim looks good. It is burshed nickel finish but has a bit of chrome finish as well.. Maybe its me. Price is much cheaper than the home stores...Shipped fast and in good condition.
Scritto da: ChrisHD
Perfect fit for posi-temp valve
Used this to change my valve trim to oil rubbed bronze from chrome. I have the Moen posi-temp valve and this worked like a charm!! It looks so nice installed! Rich dark brown color with hints of caramel.
Scritto da: TobycW
Great
Seems high quality, especially the handle. Would definitely recommend this over cheap aftermarket trim kits. Install is literally 10 minutes. i do wish they inckuded a hex tool as i couldnt find the exact size in my standard hex tool kit--had to go get my big hex set with 20 sizes. Very pleased with this item. NOTE: if the handles sticks too far out, it's not the trim kit. Your shower valve is not recessed enough. My valve was kind of free-floating behind the wall (except for the water pipes). To prevent mine from moving forward when tightening, I but a couple of small wood blocks between the valve and the inside of the wall. The handle should be no more than an inch from the surround. That said, if it's more, there is no problem except it looks odd.
Scritto da: M. Rosen
Why did I wait so long?!!!
I can't believe how many years I struggled with my old plastic round handle, when it was this easy to install the new single lever handle instead. I went on the Moen website and found what style of valve I had in place (a Posi-Temp) and verified that any of their posit-temp trim kits would work. (BTW, there are 3 basic styles they make, so make sure you also have Posi-Temp if you are looking to buy this handle). It took me about 6 minutes to do the install and it works like a charm. Install was easy and straightforward. Good instructions come with it, although it could be done intuitively, it was that easy. As others have mentioned, my handle does not sit flush into the back plate but really - I could care less. It works so well now. I would have preferred the gold or brass finish, but the price difference ( approximately $300) was just not worth it. Chrome will do fine.
Scritto da: chococross
good product but POOR support from MOEN
We had a plumber install these in our bathroom remodel. One of the them leaked. We tried to contact MOEN multiple times as per the instructions and could only leave a message. We left multiple messages and NEVER received a call back. Finally my husband went to a big box store to buy a new cartridge. Upon changing out the cartridge we realized that there was a tear in the gasket. Overall we have had great success with MOEN products and have placed them in several showers. This is the first time we have had to buy an additional cartridge. Without support from MOEN we had an unexpected cost on this remodel. We had no issues with Amazon nor the seller. Instructions in the box said to call MOEN directly with any issues. For a large company they have opportunities for better customer service.
Scritto da: Jennifer
Works
Works well
Scritto da: Larry Lewis
Looks wonderful
I’ve been changing out all my chrome fixtures to oil rubbed bronze and this is what I needed
Scritto da: Matthew A. Jacobs
Handle will only fit flush to backing plate if your lucky !
Replaced an older Moen teardrop-shaped handle with this trim kit. The screws that attach the backplate to the valve at positioned at 2 and 7. Moen made this trim kit with the ability to fit different thicknesses of shower walls. So if your shower wall is thin the handle will seem as though it's protruding away from the backplate IE the thicker the wall the closer the handle will fit in relation to the backplate. It may seem stupid but all shower walls are not built the same. If your wall is just right it will fit perfectly.
Scritto da: Amazon Customer
As described
Did the job
Scritto da: Derek
Great handle
We like it
Scritto da: Emilia
Looks dirty and
It's a very good quality product. Installation for older valves may be a bit tricky though. It took us about 2hrs but with some modifications we were able to do it without calling a plumber. The finish is horrible, it's hard to clean and shows finger prints and water spots. It constantly looks dirty and untidy. Settle for Moen's spot resistant brushed nickel instead.

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array