0
0

Общий:€ 0.00

Посмотреть корзинуПроверить
LoginRegister
0

Общий:€ 0.00

Посмотреть корзинуПроверить
LoginRegister

Kraus PU-L10CH Всплывающий слив для ванной комнаты для раковин без перелива, с удлиненной резьбой для более толстых столешниц, 10 3/4 дюйма, Хром Хром 10 3/4 дюйма

Brand:Kraus

3.7/5

€
68.35

ОПИСАНИЕ ПРОДУКТА Значение не найдено AMAZON.COM Избавьтесь от брызг бетона и других материалов с помощью долота DEWALT DW5349. Создан для использования с молотками с шлицевым приводным валом (SDS) и идеально подходит для измельчения или долбления твердых материалов. Он изготовлен из закаленной стали для увеличения срока службы и увеличения срока службы. Его размеры составляют 8 дюймов с наконечником долота 1-1 / 2 дюйма. ОТ ПРОИЗВОДИТЕЛЯ DEWALT DW5349 10-дюймовое долото SDS Plus для масштабирования Узнать больше

Количество
добавить в корзинуКупить сейчас

EAN: 0846639074179

Категории Tools & Home Improvement, Кухонные и ванные принадлежности, Снаряжение для ванной комнаты, Аксессуары для раковин и ванн, Сливы для раковин и ванн, Сливы для раковин,

ОГРАНИЧЕННАЯ ГАРАНТИЯ НА 1 ГОД с первоклассным обслуживанием клиентов, доступным для поддержки ваших потребностей – СОВМЕСТИМО С рядом раковин KRAUS для ванных комнат, включая серии керамических раковин Viva и Elavo – ПОЖАЛУЙСТА, ОБРАТИТЕ ВНИМАНИЕ: для максимальной функциональности и правильной установки измерьте сливное отверстие или обратитесь к инструкциям производителя раковины. УСТОЙЧИВАЯ К КОРРОЗИИ ПОКРЫТИЕ, не подверженное выцветанию или потускнению с течением времени – СНИЖАЕТ ЗАСОРИВАНИЕ, не допуская попадания мусора в сливную трубу раковины в ванной комнате – РАЗМЕРЫ: Общая длина 10 3/4 дюйма (от выдвижной верхней части до конца хвостовика); Диаметр колпачка: 2 5/8 дюйма. Диаметр соединения хвостовика: 1 1/4. ЛЕГКАЯ В УСТАНОВКЕ герметичная конструкция со всеми резиновыми прокладками в комплекте – Обеспечивает идеальную герметизацию сливных отверстий стандартного размера – ПРОСТОТА В ИСПОЛЬЗОВАНИИ: подпружиненная пробка POP-UP не требует подъемного стержня – Просто нажмите на сливную крышку, чтобы закрыть и закройте, нажмите еще раз, чтобы открыть и дать воде стечь. ПРЕВОСХОДНОЕ КАЧЕСТВО с МЕТАЛЛИЧЕСКИМ КОРПУСОМ и наконечником, которые обеспечивают максимальную прочность для надежного длительного использования – УДЛИНЕННАЯ РЕЗЬБА позволяет устанавливать этот трап с более толстыми раковинами и столешницами, включая мойки со стеклянными сосудами – Для раковин С переливом см. номер модели сливного трапа KRAUS ПУ-11. СЛИВ POP-UP ASSEMBLE совместим с раковинами унитазов БЕЗ ПЕРЕЛИВА, включая полуутопленные раковины и раковины в виде чаши – УНИВЕРСАЛЬНАЯ КОНСТРУКЦИЯ: Подходит для раковин для ванных комнат со стандартной сантехникой США и сливным отверстием 1 3/4 дюйма.
Batteries Required? ‎No
color Chrome
Color ‎Chrome
Country of Origin ‎China
Customer Reviews 4.7 4.7 out of 5 stars 358 ratings 4.7 out of 5 stars
Finish ‎Chrome
Included Components ‎Product
Installation Method ‎Semi Recessed
Item model number ‎PU-L10CH
Item Package Quantity ‎1
Item Weight ‎15.8 ounces
Manufacturer ‎Kraus
Material ‎Brass
Part Number ‎PU-L10CH
Product Dimensions ‎2.63 x 2.63 x 10.75 inches
Size ‎10 3/4 Inch
Warranty Description ‎1 Year Limited Warranty

3.7

13 Review
5 Star
81
4 Star
11
3 Star
4
2 Star
1
1 Star
2

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: Amazon Customer
This is exactly what you need for BIG THICK OLD CERAMIC Sinks !
I have these old ceramic sinks that are very thick on the bottom around the drain hole. I tried every trick in the book to get standard size drains to fit. I tried several different types of off the shelf drains but I could never get the drain to tighten down enough to keep it from leaking around the drain stem. I saw this on amazon after searching for hours for something that would work.. I knew immediately when I saw this that it would work on my sinks. Sure enough it fit in flawlessly with enough length to get a tight seal around the sink drain. The ease with which it went in made me think I did something wrong, since I usually screw up my home repair jobs at least once before i get it right. Highly recommended for non-standard or old ceramic sinks.
Scritto da: Happy Day
Works perfectly..
I have a vessel sink with a non pop up because they always tell you to not get a pop up or you'll overflow the sink.. but I got the pop up and i like it. works easily, one finger presses it down.. press to release. I've had cheaper brands that the pop up wouldn't stay down.. This is very heavy duty, no cheap plastic.
Scritto da: james bullard
It doesn't seal with provide washer without added silicone sealant
It works
Scritto da: jmonster
Silver tailpiece
If you're plumbing is exposed, a bright silver tailpiece kinda kills the deal with a matte black decor.
Scritto da: JdNY
Save-the-day pop-up drain
OMG! I am so happy to find Kraus PU-L10CH Bathroom Pop-Up Drain Assembly for Vessel Sinks and a good quality product. I recently purchased a Bathroom Vanity which included a vessel sink and pop-up drain at Amazon. I didn't want to use the countertop that came with the vanity because I always wanted a stone, granite or marble top instead. I bought a gray stone top which went magically with my vanity, but a problem popped up; the pop-up drain that came with it didn't have enough threads, in other words, it's too short because the stone top added one inch more which wasn't in the blue print for the pop-up drain that came with the vanity, To make it worse, no plumbing store in our area had one with extra threads. Hubby said we have to use the original top since he couldn't find it anywhere. No way, somewhere had to have it and I am willing to wait until I find it, because I am not sending back the stone top which complimented this cabinet OMG. Please note, it's not for vessel sinks with overflow, but even though ours have an overflow, it was what we needed to solve the problem. If Kraus makes one for sink with overflow, I would like to find it and we would change this one, but for now it solved a major problem. Kraus PU-L10CH Bathroom Pop-Up Drain Assembly for Vessel Sinks hubby found on Amazon saved the day. Yayyyyyyy!!
Scritto da: BayGuy
Reasonably Easy to Install EXCEPT: High Likelihood these drains will leak--READ THIS FIRST
Though I'm not a plumber, I have installed a number of sinks/drains/plumbing fixtures over the years. I installed a Kraus vessel sink and the associated pop-up drain assembly (PU-10SN) for the sink (no overflow). The installation was very straightforward and the products look great and appear to be of good quality (at least in my opinion). No matter what I did though (trust me, the installation was done correctly), I had a small leak which appeared to be 'oozing' between the nut and the drain--thus it was obvious that water was somehow getting in between the topside drain flange and the sink itself. It was maddening! There is a thin silicone gasket that goes under the drain flange which is the problem. In the past, I have used plumbers putty when setting a drain into a sink. I wondered if the silicone gasket was at fault... then I came upon this Amazon review/video: https://www.amazon.com/gp/customer-reviews/R29WIBZQEJVO5B/ref=cm_cr_arp_d_viewpnt?ie=UTF8&ASIN=B001VJ7PKC#R29WIBZQEJVO5B Eureka! Toss the silicone gasket and set the drain using plumber's putty. I also applied Teflon tape to the threads closest to the drain (for added 'insurance'). No more leaks! I would venture to guess that there are more than the original reviewer and myself who have experienced this issue. Many thanks to 'SquirrelGirl' who posted the review/video that solved the problem.
Scritto da: Kevin Autrey
Great Product
Finding a sink drain with extended threads was *quite* the challenge. I was afraid I was going to have to settle on a piece of plastic junk until I found this Kraus unit, which is just a rock solid drain assembly. I did drill holes in the side (measuring 20 times and drilling just once!) in order to make this a "with overflow" variety, which worked fine. This drain is definitely more expensive than the plastic junk, but will last forever.
Scritto da: Janet
A Very nice upgrade
First let me say I had a plumber put this in since I had other plumbing that he was doing. This is a standard drain size eventho the top looks large. That's just the umbrella Design . It sits a tiny bit above the drain and the drain seals just fine underneath when you push the "umbrella" top down. Like others have said, do NOT use the silicone ring and put it in with Plumbers putty. Better seal and no leaks. It went in no problem and it is Beautiful. The plumber told me I got a good one by buying Kraus.
Scritto da: KB
Brand
Price was less than hardware store, brand specific to make of sink, so fit properly. Had to cut plastic drain pipe to fit longer drain assembly. Looks great.
Scritto da: Roy
Custom Stone sink
Needed a long drain for the custom sink and it worked perfect
Scritto da: kattedreper
Good Quality
High quality mechanism. Well designed for installation - drain is two separate pieces, which makes alignment easy. Only complaint would be lack of instructions to remove top to clear hair, etc. I'll figure that out later.
Scritto da: Nico Pasquotti
Very close to champagne bronze
Used as an alternative champagne bronze from delta option and it worked great.
Scritto da: Russell
Perfect
Looks and works perfectly. Easy install. Good price

Сопутствующие товары

hot
PF WaterWorks PF0904Универсальный выдвижной сливной шаровой стержень/центральный шарнирный стержень для туалета - Регулируемый шаровой стержень с резьбой + 3 гайки (универсальные, Moen, металлические) + 3 размера шариков + ClipChrome1Piece
3.1/5

€ 31.75

PF WaterWorks PF0904Универсальный выдвижной сливной шаровой стержень/центральный шарнирный стержень для туалета - Регулируемый шаровой стержень с резьбой + 3 гайки (универсальные, Moen, металлические) + 3 размера шариков + ClipChrome1Piece
3.1/5

€ 31.75

hot
Kingston Brass KB3001 Fauceture Lift and Turn Sink, Chrome
3/5

€ 66.27

Kingston Brass KB3001 Fauceture Lift and Turn Sink, Chrome
3/5

€ 66.27

hot
Сливная решетка для раковины Danco без перелива, хром, 89463
3.5/5

€ 56.09

Сливная решетка для раковины Danco без перелива, хром, 89463
3.5/5

€ 56.09

hot
KISSLER 58-1165 Цена Pfister Пробка для умывальника,белая
3.1/5

€ 23.41

KISSLER 58-1165 Цена Pfister Пробка для умывальника,белая
3.1/5

€ 23.41

hot
Kingston Brass KB2005 Designer Trimscape 22 Gauge Drain Pop-Up в сборе, бронза, протертая маслом, бронза, протертая маслом, 8-1/2
3.6/5

€ 69.78

Kingston Brass KB2005 Designer Trimscape 22 Gauge Drain Pop-Up в сборе, бронза, протертая маслом, бронза, протертая маслом, 8-1/2
3.6/5

€ 69.78

hot
Kingston Brass KB4000MB Trims Cape Grid Drain для раковины без перелива, длина 7-13/16, матовый черный
0.1/5

€ 73.38

Kingston Brass KB4000MB Trims Cape Grid Drain для раковины без перелива, длина 7-13/16, матовый черный
0.1/5

€ 73.38

hot
Сменный сливной плунжер Symmons P-100N, белый
3.4/5

€ 39.08

Сменный сливной плунжер Symmons P-100N, белый
3.4/5

€ 39.08

hot
Выдвижная сборка Rapid Repair RP31200SN, матовый/матовый никель
3.4/5

€ 44.69

Выдвижная сборка Rapid Repair RP31200SN, матовый/матовый никель
3.4/5

€ 44.69

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array

Общий:€ 0.00

Посмотреть корзинуПроверить

Категории

Все категории
Меню Категории Около Корзина

Menu