Lyn-Tron - B009YMI0WU, алюминий, метрическая система, размер винта M4, внешний диаметр 6 мм, внутренний диаметр 4,2 мм, длина 5 мм (упаковка из 10 шт.) M4 6 мм 4,2 мм 5 мм 10

Brand:Lyn-Tron

3.5/5

29.11

Алюминий обеспечивает коррозионную стойкость, легкий вес и хорошую электропроводность. Круглая прокладка разделяет или соединяет компоненты в системе для точного размещения.

Нет доступных единиц
Алюминий обеспечивает коррозионную стойкость, легкий вес и хорошую электропроводность. Круглая прокладка разделяет или соединяет компоненты в системе для точного размещения.
Brand Lyn-Tron
Color Grey
Country of Origin USA
Item Dimensions LxWxH 5 inches
Item model number AA5005-40-05.0-00
Manufacturer Small Parts
Material Aluminum
Size M4

3.5

7 Review
5 Star
65
4 Star
20
3 Star
12
2 Star
0
1 Star
3

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: Karamaz38
Satisfied customer
This item met my expectations and I have no problem ordering from this seller again.
Scritto da: Robert M
Exactly as described
Used these as spacers, after boring out the ID by a couple of millimeters. Decent price and does exactly what you think. Fair price considering the rising costs of aluminum.
Scritto da: DeWayne L. Duff
Very precise - exactly to specs! Good quality too!!!
Okay, so, these are a relatively simple device with some simple specs, but... a lot of manufacturers are slightly off in their specs, or they are spot-on, but in a large batch you still find a few poor-quality parts... this was different, these are all consistently made to the exact specs in the description! A nice surprise! I ordered slightly more than I needed, so I could have lost a few to poor quality, but I didn't! If I had been producing on a budget and a tight-timeline, these would have saved me from any headaches! I'll be back, buying from this seller again!
Scritto da: beckaliz
Measured length and outer diameters are somewhat variable.
I bought a 10 pack of the 10mm length. Haven't used them yet but they seem nice enough for what I intend to do. Do not buy these if you need extreme precision (> 0.1mm accuracy). Here are the measurements of each one using a Mitutuyo No. 293-344 micrometer: 1. length: 10.097mm, OD: 10.006mm 2. length: 10.024mm, OD: 10.021mm 3. length: 10.058mm, OD: 10.026mm 4. length: 10.053mm, OD: 10.018mm 5. length: 10.064mm, OD: 10.016mm 6. length: 10.066mm, OD: 10.028mm 7. length: 10.047mm, OD: 10.007mm 8. length: 10.057mm, OD: 10.019mm 9. length: 10.088mm, OD: 10.013mm 10. length: 10.105mm, OD: 10.015mm The length and OD measurements had approximately +/-0.01mm error depending on where on the circumference they were measured. Based on the variability, I have to agree with the other reviewer on here and take of one star. However, I wouldn't remove more than one star for this. Seller: putting the error on the measurement may help.
Scritto da: ZReviews
Hard to tell what you are getting
The lack of an accurate picture makes it difficult to tell what you are getting but I gambled and when they arrived they were the dimensions described.
Scritto da: Richard-S-C
Works
Works just as advertised.
Scritto da: Bennett D Marks
Three Stars
spacers were off by .05 to .1 mm

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array