Мультимедийная розетка Bryant Electric RJ65WTR tradeSELECT JLOAD с защитой от несанкционированного доступа, два открытых порта без нагрузки, 15 А, 125 В, белая

Brand:Bryant Electric

2.8/5

48.40

Мультимедийная розетка Bryant Electric JLOAD. Установите розетки и устройства передачи голоса/данных именно там, где они необходимы, в минимально возможном пространстве. Специально разработан для обеспечения питания, Cat. 5e и коаксиальный в одинарной коробке. Требуется мультимедийный блок JLOAD RJ600. Идеально подходит для HDTV и компьютеров, где требуется сочетание мощности и данных. Включает рамку декоратора, одну кат. 5д, один F-коннектор и одна силовая розетка 125В с делителем напряжения. Эксклюзивная J-LOAD объединяет высокое и низкое напряжение в один блок. Специализированные продукты для доставки обеспечивают связь там, где раньше это было невозможно. Большие комнаты, кухни, лаборатории и зоны отдыха могут извлечь выгоду из этих продуктов. Делайте больше в одной банде. Предусмотрен для передачи данных по телефону и коаксиалу. Подходит для любой конфигурации домкрата с защелкой. Изолирует низкое напряжение и мощность в одной коробке. Индивидуальный монтаж и доступный в 15 A . Внесен в список UL 1863 — Аксессуар для коммуникационной цепи. CSA сертифицирован. Соответствует RoHS.

Доступный в 15 или 20 Ампер. Обеспечивает данные, телефон и коаксиальный. Монтаж коробки на заказ. Изолирует низкое напряжение и мощность в одной коробке. Подходит для любой конфигурации домкрата с защелкой.
Brand Bryant Electric
Color White
Compatible Devices Television
Country of Origin China
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 4.1 x 3.7 x 1.29 inches
Item model number RJ65WTR
Manufacturer Bryant Electric
Product Dimensions 4.1 x 3.7 x 1.29 inches; 2.88 Ounces
Total Power Outlets 1

2.8

8 Review
5 Star
46
4 Star
19
3 Star
10
2 Star
12
1 Star
14

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: Catering Online
This is great at a reasonable price!
I read the reviews before buying this and I noticed that everyone that left bad reviews it's because they did NOT read the description that you need a Hubbell-Raco 6239 box, and that is actually what I was looking for because the 6239 box comes with 2 outlets and I wanted 1 outlet and data. If you are planning to use in a regular box it will not work due to the positioning of the screws. The outlets for the 6239 box are double in price so this is a GREAT bargain!
Scritto da: Ken G. - Seattle Area
Read Description VERY Carefully!!
I missed the part in the product description where it says, "Requires JLOAD multimedia box RJ600." This will NOT fit a standard box. My mistake, but the seller should emphasize this restriction.
Scritto da: Xx
Doesn’t fit stand box
Good product, but I wish it was move obvious it doesn’t fit a standard box for the novice DIYer
Scritto da: Jake
Single-gang solution for both power and data
I knew going into buying this that it was supposed to be used with a custom Hubbell box. The screw locations are offset, and you won't be able to use this with a standard box. Also you're supposed to separate the high and low voltage sections with a "permanent barrier".Hubbell Multimedia Box has provisions for both the odd mounting positions and the ability to install a partition. With the help of a 3D printer I was able to solve both problems while using a standard old-work box, but it took some engineering. You probably should know what you're doing if you've buying this product. Its too easy to try and force fit it into the wrong type of box, or omit the partition and create a hazardous situation (or at least an installation that is not up-to-code) Recommend you consult an electrician. All-in-all, this is a good product, but probably best for new-work. I prefer the single-gang installation for flat-panel televisions. This gets the job done.
Scritto da: Sydney Henning
Requires modification to fit a standard outlet
This didn’t fit a standard outlet, but I was able to modify it to work. I bought blank face covers and an Ethernet connector, so I could plug an Ethernet cable into the back - no splicing Ethernet cables. It’s done. It works. I’m happy. But why doesn’t it fit in a standard outlet?
Scritto da: Seth
This solution is pretty slick and fit my needs for a single gang ...
This solution is pretty slick and fit my needs for a single gang / separated voltage solution. This comes with everything you need for combination with a Hubbell RJ600 box (or floor or cabinet box). I took off one star as the connection points are fairly thin and could break if you're not super careful during installation/adjustment. HDMI Warning: Because there is a voltage divider inside the single gang box, there is little room to fit in an HDMI keystone and molded HDMI plug. I experimented with a couple different ideas, but in the end needed to use a HDMI pigtail so I could turn the cable. This is extremely tight and requires some thought.
Scritto da: Reggie
I could not figre out how to mount the plate
Worked perfectly until it was time for me to mount this in the box and put the plate on...I had to modify o couple of things to make it work.
Scritto da: Jay E
Stupid to require a special box.
If you have boxes in place and you don't want to tear up your wall putting in a new one... this is a moronic choice. I will create a custom mount for this to get it to work but seriously.. This is just a money play to force you to buy their box.

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array