Плоскогубцы Channellock 480 BIGAZZ

Brand:Channellock

3.9/5

111.39

ОПИСАНИЕ ПРОДУКТА Плоскогубцы CHANNELLOCK BIGAZZ с прямыми губками и канавками настолько велики, насколько вам нужно, с размером губок 5-1/2 дюйма. Его 12 нескользящих регулировочных каналов с подрезкой обеспечивают универсальный диапазон регулировок практически для любого полевого применения. Эти плоскогубцы рассчитаны на долгий срок службы благодаря застежке PermaLock, предотвращающей поломку гаек и болтов, запатентованной усиливающей кромке, сводящей к минимуму поломку под напряжением, и зубьям, подвергнутым лазерной термообработке, для лучшего и более длительного захвата. Плоскогубцы сделаны в США и выкованы из высокоуглеродистой стали со специальным покрытием для максимальной защиты от ржавчины. AMAZON.COM Готовы к большим работам (увеличение). Готовые к большим работам, плоскогубцы Channellock BigAzz 20-1/4 дюйма с прямыми губками и пазами (модель 480) идеально подходят для тяжелого промышленного использования, например, для монтажа труб, обслуживания скважин и буровых установок, а также для ремонта тяжелой техники. Модель 480 предлагает не только грубую силу, но и впечатляющий список функций безопасности. Работы, требующие высокого рычага, не проблема, так как усиливающие гребни на передней и задней части каналов шипа и паза значительно повышают прочность этого массивного инструмента и устойчивость к поломке под напряжением. высокоуглеродистая, штампованная сталь, отполированная до совершенства и имеющая массивную 5-1/2-дюймовую челюсть. Его 12 нескользящих регулировочных каналов с подрезкой обеспечивают универсальный диапазон регулировок практически для любого полевого применения. Губки этого агрессивного инструмента имеют прямоугольные зубья, обеспечивающие силу захвата во всех направлениях. Застежка PermaLock предотвращает поломку гаек и болтов, типичную для плоскогубцев других конструкций. Его дополняет легендарная синяя рукоятка Channellock, которую удобно держать в руке и легко найти в сумке с инструментами. Застежка PermaLock предотвращает поломку гаек и болтов (показана модель 440; увеличенное изображение). ТЕХНИЧЕСКИЕ ХАРАКТЕРИСТИКИОбщая длина 20,25 дюйма Длина захвата 3 дюйма Толщина соединения 0,59 дюйма Размах рукоятки 3,31 дюйма Количество регулировок 12 Ширина захвата 5,5 дюйма Вес 3,81 фунта . Инструменты Channellock, которыми сейчас управляет пятое поколение семьи DeArment, отражают традицию стремления к совершенству, поддерживаемую более века. За прошедшие годы Channellock получила несколько патентов, в том числе один в 1965 году на коническую поверхность, созданную на кулачковой стороне плоскогубцев при подрезании, и еще один в 1984 году на застежку PermaLock, используемую в ее плоскогубцах с язычком и канавкой. Channellock по-прежнему производит более 120 плоскогубцев и ручных инструментов различных размеров и типов на своих предприятиях в Мидвилле, штат Пенсильвания. * Изготовлен из высокоуглеродистой стали C1080 для превосходной производительности * Электронное покрытие для максимальной защиты от ржавчины * Запатентованная усиливающая кромка сводит к минимуму поломку под напряжением * Подрезанный язык и канавка не скользят * Легендарная синяя рукоятка удобна и легко заметна в сумке для инструментов * Сделано в СШАПосмотреть увеличенное изображение. ОТ ПРОИЗВОДИТЕЛЯ Эти пассатижи 20.25 имеют прямоугольные зубья для захвата во всех направлениях для максимального захвата и минимального износа. Запатентованная конструкция шипа и канавки с подрезкой гарантирует отсутствие проскальзывания челюсти. Запатентованная усиливающая кромка сводит к минимуму поломку под напряжением. Запатентованная застежка PermaLock предотвращает поломку гаек и болтов. Имеет комфортные ручки CHANNELLOCK BLUE. Узнать больше

Нет доступных единиц
Ручки CHANNELLOCK BLUE для комфорта. Сделано в США. Запатентованная усиливающая кромка сводит к минимуму поломку под напряжением. Крепление PERMALOCK предотвращает поломку гаек и болтов. Подрезанный язык и канавка не будут скользить. Прямоугольные, обработанные лазером зубы лучше захватывают и служат дольше.
Batteries Included? ‎No
Batteries Required? ‎No
Brand Channellock
Brand ‎Channellock
Color Factory
Color ‎Factory
Country of Origin ‎USA
Customer Reviews 4.8 4.8 out of 5 stars 832 ratings 4.8 out of 5 stars
Finish ‎Polished
Handle Material Alloy Steel
Handle Material ‎Alloy Steel
Included Components ‎Pliers & Cutters, Tongue and Groove Plier
Is Discontinued By Manufacturer ‎Yes
Item Dimensions LxWxH 23 x 6 x 1 inches
Item Dimensions LxWxH ‎23 x 6 x 1 inches
Item model number ‎480
Item Package Quantity ‎1
Item Weight 0.51 Pounds
Item Weight ‎0.51 Pounds
Item Weight ‎8.2 ounces
Manufacturer ‎Channellock
Material Metal
Material ‎Metal
Measurement System ‎Metric
Number Of Pieces ‎1
Part Number ‎480
Pattern ‎Pliers
Power Source ‎Hand Powered
Product Dimensions ‎23 x 6 x 1 inches
Size ‎5.50-Inch Jaw Capacity
Style ‎20.25-inch BIGAZZ
Usage Outside; Professional, Amateur, Inside; Amateur, Professional, Inside; Professional, Inside, Outside; Amateur, Outside See more
Usage ‎Outside; Professional, Amateur, Inside; Amateur, Professional, Inside; Professional, Inside, Outside; Amateur, Outside
Warranty Description ‎Limited Lifetime Warranty

3.9

13 Review
5 Star
89
4 Star
7
3 Star
1
2 Star
1
1 Star
1

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: Bob A.
The best there is on the retail market
You'll need to go to a ultra high end and pay up big (e.g., Sn*p On) to meet or beat Channellock. This is my eighth Channellock product and I love it. And no, Cr*ftsman stuff isn't nearly as good as this.
Scritto da: Stargatecjl
Hugh Channellock.
We use these all the time at work. Great for 4 inch valves.
Scritto da: Obed
Made in USA and definitely shows it
Solid pliers, beefy, big, and smooth. Use these to install and uninstall oil pumps off and on oil barrels. Effortless with this tool.
Scritto da: Patriot
Superb when you can't seem to open your Mason jar!
...comes in handy for tightening trailer balls, etc.
Scritto da: Profesor
Muy resistente
Excelente herramienta de trabajo muy recomendable
Scritto da: Philip
Works great
Very strong wrench jaws on this beast are 5.5 inches of raw power lol handles are a good length not to long and bulky really nice would be cool if it had better grips on handle though if you get oil on your hands look out and the lock is a little stiff for adjustments but holds that position well overall great wrench and price isent to bad for product.
Scritto da: 64 Bit User
Great quality large slip lock pliers
Not cheap but very well made. If you need this size just buy it. If you need convincing, these often save me from having to get out a large pipe wrench or a chain wrench and are generally easier to use and much lighter. Never had Channellock pliers fail in the slip joint and expect these to perform the same. Not made out of Chineseium alloy, so even at extreme clamping force nothing deflects. The choice to purchase these was affected by being an on road heavy equipment mechanic. Been turning wrenches for more than 21 years. YMMV.
Scritto da: The Man Behind the Curtain
This would be king, but there is a better choice
I bought thisChannellock 480 5-1/2-Inch Jaw Capacity 20-Inch Tongue and Groove Plier for $40 on March 2, 2015 (it's currently showing for $50.31 today May 31, 2015, a 25% increase in a mere 3 months, fwiw). This tool is "okay", but due to its weight and general unwieldiness it's much harder to use than smaller Channellocks. At the time I had also evaluated theIrwin Industrial Tools 2078120 20-Inch GrooveLock Pliers which were around $50, maybe $53 or so, if I recall correctly. (Today they are $44.59.) In retrospect I wish I had bought the Irwin 20-inch GrooveLocks instead of the 20-inch Channellock 480. Partly I wish I bought the Irwin because I ended up buying the Irwin anyway on May 10, 2015 after using the Channellock to pull a bunch of heavy wooden stakes that had supported a bunch of trees I put in a while ago. The Channellocks were a total struggle because every time I tried to apply these pliers to a stake, the jaw slipped open or closed before I could get a grip on the stake. It was a total wrestling match and after a while I gave up and ordered the Irwin pliers. The Channellock has the advantage that it is made in the USA. The Irwin is made in Taiwan "to Irwin specs" according to one customer review on the Irwin page. The American advantage is not that it's a better tool, but it does support American manufacturing. Unfortunately though, I must with regret recommend the Irwin tool instead. The Irwin tool is superior in these respects: 1) The Irwin tool has a pushbutton lock on the fulcrum pin that lets you set the jaw opening width and it will stay there until you press the button again and reposition the jaws. The convenience of this cannot be overstated. The tool can be repeatedly used without wrestling with it to get the jaws set right each time you apply it. This is the biggest reason to buy the Irwin. The other points below are less important, but still worth considering. 2) The Irwin's jaw shape is more useful, at least for gripping most things. It's conceivable that there is a shape that is more amenable to the Channellock's flatter jaw, so YMMV. 3) The fulcrum of the Irwin is located much closer to the jaws, which has the effect of making the end of the handles longer in relation to the point of leverage. This may afford the jaws a better grip. In addition, the effectively longer handles (i.e. further from the fulcrum) should provide greater rotational leverage. This point is somewhat speculative. I only noticed this issue when I laid the pliers over one another to compare them. The difference was quite striking. I don't have any objective test results to prove this point. Again, the locking issue is the big reason to get the Irwin. The jaw shape and this fulcrum-location issue are minor points in comparison. One possible consideration is that it's conceivable that the locking mechanism on the Irwin could be a point of failure. I have several Channellocks that I've owned for decades and they're still functioning at 100%. I'll update this review if the Irwin fails -- or in a few decades if it doesn't fail. :) It's very hard to rate the Channellock 480 on the 5-star scale. If the Irwin Groovelock didn't exist, the Channellock would rate a 5. Since the Irwin does exist, I really want to give the Channellock a 1 but somehow that doesn't seem quite fair. Thus the 3 rating. I bought the Channellocks on the price advantage when I bought them. Even if today's price advantage is to the Irwin (as noted above), in retrospect I would buy the Irwin over the Channellock given the relative pricing back in March -- and the advantage of both experience and hindsight. It should be noted though that the locking issue hasn't been as big a deal with the smaller Channellocks. The unwieldiness that comes with the size and weight of 20-inch pliers really highlights the issue. Nonetheless, my future purchases of Channellock-style pliers (if any, since I'm reasonably well-stocked) will be Irwin Groovelocks, which are made in similar sizes to every size Channellock.
Scritto da: Brad VonderLinden
Perfect
It's a channellock product. Probably the best option for this type of wrench.... 'nuff said!
Scritto da: Amazon Customer
Five Stars
Can handle upto 7" diameter plastic socket union nuts.
Scritto da: colin
Big Azz
Had no problem removing 5 1/2" desiccant filter. Excellent tool. Could do a little better on price. Lowes canada had them much cheaper
Scritto da: RP
Great price and quality!
Channellock 480 20 inch pliers. Great price and great product. Genuine Channellock quality for big pliers at under 100 bucks. Takes from a professional, the quality is much higher than any offshore product.
Scritto da: Amazon Customer
Rapide
A bon prix

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array