0
0

Общий:€ 0.00

Посмотреть корзинуПроверить
LoginRegister
0

Общий:€ 0.00

Посмотреть корзинуПроверить
LoginRegister

Продукты для ПК PC-Clear Epoxy Adhesive Liquid, двойной шприц на 1 унцию, прозрачный 70147 Двойной шприц на 1 унцию, 1 упаковка

Brand:PC Products

3.5/5

€
26.10

ОПИСАНИЕ ПРОДУКТА PC Products PC-Clear Epoxy Adhesive Liquid . PC-Clear — полностью прозрачная жидкая эпоксидная смола. PC-Clear разработан таким образом, чтобы оставаться прозрачным во время и после отверждения. PC-Clear очень прочен и гибок, что делает его непохожим на многие жидкие эпоксидные смолы. Если необходимо замаскировать ремонт или отсутствие цвета, ваш выбор – PC-Clear. PC-Clear демонстрирует превосходную химическую стойкость к слабым кислотам, щелочам, моющим средствам, бензину, мазуту, соли и пресной воде. Примечание. PC-Clear не соединяется с вощеной бумагой, тефлоном, полиэтиленом и некоторыми другими пластиками. Существуют сотни пластиков в тысячах комбинаций. Проверьте небольшой участок, если сомневаетесь. ОТ ПРОИЗВОДИТЕЛЯ Компания PC-Products, отмечающая 75-летие «Починки вещей», предлагает качественную и надежную продукцию для ремонта. Решения для ремонта практически всего, что нуждается в ремонте или что вы можете сломать. От бетона до восстановления дерева и тяжелого постоянного ремонта, мы вас охватили. Да; Мы можем это исправить

Количество
добавить в корзинуКупить сейчас

EAN: 054983070147

Категории Industrial & Scientific, Адгезивы, Герметики и смазки, Эпоксидные клеи, Эпоксидная смола для плитки Клеи,

Образует прочную связь для долговечности. Обеспечивает время работы около 4 минут, время отверждения для работы 1 час и время полного отверждения 24 часа. Непрерывный диапазон рабочих температур от -20 до +200 градусов по Фаренгейту. При смешивании сначала становится непрозрачным, затем прозрачным до полного отверждения, чтобы смешаться со связанным материалом. Прозрачный жидкий эпоксидный клей склеивает дерево, металл, стекло, керамику, бетон и ткань.
Brand PC Products
Color Clear
Compatible Material Wood, Glass, Ceramic, Concrete, Metal
Country of Origin USA
Domestic Shipping Item can be shipped within U.S.
International Shipping This item can be shipped to select countries outside of the U.S.
Is Discontinued By Manufacturer No
Item Form Liquid
Item model number 70147
Manufacturer Protective Coating Co.
Material Liquid
Product Dimensions 8.25 x 3.75 x 1 inches; 1.6 Ounces

3.5

13 Review
5 Star
71
4 Star
16
3 Star
7
2 Star
2
1 Star
4

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: doctavia
It works no complaints
it mixes well! and sticks less than 5 min.
Scritto da: E. Mcginnis
Small problem with Dispensing but works fine
I used this for gluing a broken piece of ceramic together and also for kintsugi, mixing it with mica for color. It worked great as an epoxy, and for the kintsugi, filled a hole and dried hard as metal. So that function it great. I did however downgrade the “ easy to use” rating, because it didn’t dispense evenly. When I first pushed the plunger, it came out of one side before it did the other, as if there was an air bubble in one side. The amount evened out as I continued to push, and I dispensed more than I needed, to decrease the difference. It did dry hard, as a stated above, so maybe the 2 parts don’t have to be exactly the same amounts, but I did think it was worth mentioning. There was one feature that was very useful. The cap that you put Back on to store it only goes on one way, so you don’t have to remember how you took it off. There is no danger of left over harder in the cap mixing with left over resin in the plunger and glueing the whole thing shut.
Scritto da: King Slugopotamus
Consistently great product!
This is my go-to brand for short-cure epoxy - it's a great value, mixes easily, sets up consistently, and adheres to everything I've tried it with: specifically aluminum, nylon, & fiberglass.
Scritto da: C P
Works great!
This is a great product. Strong, clear and gives you enough time to get the job done. So much better than super glue!
Scritto da: Pedro C.
As good as it gets Epoxy wise for the price
I for one adore this product for many different reasons.... -For one, you can't beat that price! Around $5 with tax included, that's practically solutions in a bottle. Only other thing that fixes that many problems in my life that's in a bottle is alcohol. -Secondly the amount that you do get is quite frankly insane. -It cures really quickly, not the 4 minutes advertised I'll give it that but 30 mins and it's already hardening for sure. Give it the full 24h treatment and you got a solid seal. Only cons I can think of is.... -It will smell but that's a given, we're using Epoxy here not Febreze. Plus you probably want something to smell bad so your kids don't think it's food yeah? -The cap can at times get a bit stuck onto the tube. It's not as common but since I order so many of the damn things for my projects I have had ONE and only one have the cap stick and I needed to slice it with a knife. Besides that? Absolutely worth your time and money. Go on, fix stuff...you know you want to ;)
Scritto da: EduardoJuan
Disappointed.
While clear epoxy may be an advantage in some applications, the lack of color contrast between the resin and hardener makes it difficult to tell when the mix is ready to use. My mix was apparently not ready and it took more that 24 hours to harden. That is, I’m assuming that the two syringes are properly calibrated to deliver the correct amounts for each component.
Scritto da: BigJim
Work perfect to repair my drill
My 3/8" Makita rechargeable drill had fallen off of the ladder and snapped the handle in half right above the battery. I removed the rubber covering on the area where the handle had snapped in half. The lower section of the handle that holds the battery had completely snapped off. The only thing holding the lower section together with the upper section was the wiring harness. It had left the lower section hanging with a half inch gap. I applied acetone to the broken area and areas around the break, to etch into the plastic. I applied the two-part epoxy to the brake, above and below the brake. I tightly secured the two halves together and let it sit overnight. I used the first coat of epoxy just as the base coat. I then took fiberglass mesh drywall tape and applied three layers of the mesh tape around the break in the handle. I applied the second coat of epoxy which was the first coat over the fiberglass drywall tape. I let.the second coat of epoxy dry overnight. Lastly I applied the third coat of epoxy,which was the second coat of epoxy over the fiberglass drywall mesh. I applied the second coat over the mesh strictly to thicken the coat that was covering the mesh. That was a week ago now. I have used the drill multiple times since the repair. The drill is working perfect, seems to be very strong and holding up well. The 3/8" drill casing itself is some type of hard plastic. I think that this epoxy works perfect for this application with the fiberglass mesh for added strength. I used this epoxy strictly for the strength and not for the aesthetics. I'm very happy with the end result. In my opinion it has completely repaired this 3/8" Makita rechargeable drill. Otherwise this drill would have been thrown into the trash.
Scritto da: Chris Robbins
Best value I ever found for two part epoxy.
The media could not be loaded. standard large size with screw on cap. Dry's quickly, or in the standard time. 5 min for solid enough to not need support. and 15-30 min for compete hardening. This time depends on how evenly you mix the two parts
Scritto da: jmckiver
Excellent quality
Done very thing it said on the label
Scritto da: Amazon Customer
An easy way to repair a small chip in a quartz worktop
Easy to mix, easy to apply and an almost invisible finish and way cheaper than a new worktop.
Scritto da: Del Buchanan
Great for Ceramic Repairs!
This stuff is great! I bought it purposely to repair the lid of an old ceramic sugar bowl, of purely sentimental value. I already had superglue, which would probably have worked but does not give a very strong bond. I have used epoxy adhesives in the past for ceramic repair and often been disappointed by the poor fit of fragments and the yellowish lines of the adhesive that remains clearly visible between them. The simple dual-syringe mechanism works perfectly, as does the re-sealable cap. Working time is sufficient to mix the product, apply with due care to two surfaces and to press the pieces into position until they are fairly firmly fixed. It's worth noting that you also have a short time to wipe away any excess adhesive - definitely do this before it sets! I left the repair to cure fully overnight and the result is perfect - the join is almost entirely invisible.
Scritto da: Pixie Simpson
Really good sticky stuff!
Really good sticky stuff, but you have to work a bit quick with it as it starts to 'stick' rapidly. Can be a bit messy. Shows as clear but I noticed it 'yellowed' over time when I repaired some china pieces. Good value, probably depends on what you use it for.
Scritto da: Mr. Martin
Does the job
Easy to use although would prefer that it self mixed on extrusion but upside is it can be used multiple times. Nice product.

Сопутствующие товары

hot
WEST SYSTEM 865-4 G/5 Пятиминутный эпоксидный клей, 8 жидких унций
3.7/5

€ 68.77

WEST SYSTEM 865-4 G/5 Пятиминутный эпоксидный клей, 8 жидких унций
3.7/5

€ 68.77

hot
WEICON Эпоксидный минутный клей 0,8 унции (24 мл)
2.9/5

€ 38.83

WEICON Эпоксидный минутный клей 0,8 унции (24 мл)
2.9/5

€ 38.83

hot
PC Products PC-7 Эпоксидная клейкая паста, двухкомпонентная для тяжелых условий эксплуатации, 2 унции в двух банках, угольно-серая 27776 2 унции в двух банках 1
3.5/5

€ 25.81

PC Products PC-7 Эпоксидная клейкая паста, двухкомпонентная для тяжелых условий эксплуатации, 2 унции в двух банках, угольно-серая 27776 2 унции в двух банках 1
3.5/5

€ 25.81

hot
Rectorseal 97606 Эпоксидная замазка 4 унции EP-400
3.5/5

€ 27.84

Rectorseal 97606 Эпоксидная замазка 4 унции EP-400
3.5/5

€ 27.84

hot
3M Scotch-Weld Epoxy Adhesive DP125, серый, двухкомпонентный эпоксидный универсальный гибкий клей, 400 мл (13,52 жидких унций), Duo-Pak, 6 шт./упаковка
0.1/5

€ 402.61

3M Scotch-Weld Epoxy Adhesive DP125, серый, двухкомпонентный эпоксидный универсальный гибкий клей, 400 мл (13,52 жидких унций), Duo-Pak, 6 шт./упаковка
0.1/5

€ 402.61

hot
3M TALC Scotch-Weld 87838 Эпоксидный клей DP190, 200 мл, полупрозрачный, 6,763 эт. унция
0.1/5

€ 129.11

3M TALC Scotch-Weld 87838 Эпоксидный клей DP190, 200 мл, полупрозрачный, 6,763 эт. унция
0.1/5

€ 129.11

hot
PC Products PC-11 Эпоксидная клейкая паста, двухкомпонентная, морского класса, 10 галлонов в двух ведрах, не совсем белая 900116 PC-11 10 галлонов
3.6/5

€ 1807.12

PC Products PC-11 Эпоксидная клейкая паста, двухкомпонентная, морского класса, 10 галлонов в двух ведрах, не совсем белая 900116 PC-11 10 галлонов
3.6/5

€ 1807.12

hot
MG Chemicals 9200FR Огнезащитный конструкционный эпоксидный клей, 45 мл Двойной пневматический дозатор Двойной картридж 45 мл
3.9/5

€ 61.85

MG Chemicals 9200FR Огнезащитный конструкционный эпоксидный клей, 45 мл Двойной пневматический дозатор Двойной картридж 45 мл
3.9/5

€ 61.85

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array

Общий:€ 0.00

Посмотреть корзинуПроверить

Категории

Все категории
Меню Категории Около Корзина

Menu