Промывочное устройство для морского мотора Shoreline Промывочное устройство Dual Flow

Brand:Shoreline Marine

3.6/5

46.41

Акриловую баскетбольную подставку BCW можно использовать для демонстрации спортивных памятных вещей, таких как баскетбол, футбол, футбольный мяч, мяч для регби и другие.

Нет доступных единиц
CALCUTTA OUTDOORS: Ведущий производитель потребительских товаров для рынка спорта и отдыха на открытом воздухе, предлагающий товары, ориентированные на производительность, включая удочки, снасти, холодильники, питьевую посуду, одежду для активного отдыха, весло-спорт и морские аксессуары. ПОДХОДИТ ДЛЯ: Этот очиститель лодочных моторов эффективно работает на большинстве внешних и внутренних вводов/выводов. Он позволяет работать на холостом ходу для регулировки двигателя вне воды и обеспечивает подачу воды с обеих сторон водозаборника. Устанавливается всего за несколько секунд и не требует инструментов для установки или удаления. ПРОСТОТА В ЭКСПЛУАТАЦИИ: вы можете подключить этот промыватель лодочного мотора к стандартному садовому шлангу и поддерживать чистоту мотора, смывая песок, соль, ил и грязь. Если вам нужно настроить двигатель и внести небольшие коррективы на воде, вы можете доверять этому инструменту. ЗАЩИЩАЕТ ДВИГАТЕЛЬ: Это устройство для промывки двигателя помогает продлить срок службы подвесного двигателя, регулярно смывая соль, ил и грязь после использования. Вы можете не только очистить лодку, но и подготовить ее к зиме с помощью этого важного аксессуара для лодки и сохранить свои инвестиции в хорошем состоянии. ДОПОЛНИТЕЛЬНОЕ ОБОРУДОВАНИЕ ДЛЯ ДВИГАТЕЛЯ: Поддерживайте двигатель вашей лодки в хорошем состоянии, защищая его с помощью эффективного и надежного промывочного устройства Shoreline Marine Dual Flow. Это оборудование предназначено для большинства стационарных и подвесных двигателей и помогает увеличить срок их службы, защищая их от загрязнений.
Brand Shoreline Marine
Color Multi
Item Weight 16 Ounces
Material Blend
Recommended Uses For Product For Inflatable Boats

3.6

13 Review
5 Star
75
4 Star
14
3 Star
5
2 Star
2
1 Star
4

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: Nicer Than Average
Improved outboard motor flush muffs gives good flow for longer runs out of the water.
I bought this to replace my older one sided water flow muff. I wanted to make sure of getting plenty of cooling water while fixing my outboards. Only problem is a little bit of spray. But still lots of cooling and a good strong tell-tale (pisser) and output flow.
Scritto da: Kat
Easy to put on and works great
Used this on my 90hp Mercury after the engine stopped peeing with the old one. Easy to apply and worked great! Should have bought a new one ages ago.
Scritto da: Buyer
Verify the size you need to make sure it will work with your outdrive, there are multiple available.
There are apparently 2 version of these, and one is longer than the other. I haven't had any problems with the actual operation of the unit, it attaches to the drive unit well, and holds its place. The only issue I have, is from me not educating myself on the available sizes. For a volvo penta sx outdrive on a Crownline with a 5.0GX, this unit is too short to reach the water inlet ports when ran from the front (bow side) of the drive unit pushing back towards the propeller. It's about 4" short of reaching the water inlet ports. I found I can run it from the propeller side of the drive up to the water ports, but that does not allow you to put the boat into drive or reverse while running, as the prop would chop up and damage the flush unit. Had I purchased the longer version, I'm sure it would have been fine. Regardless, it still works, and I still use it to flush out the engine after a lake trip. Just can't put the boat in drive or reverse while using it, and that's my fault.
Scritto da: Steve Minshull
Worked great
Easy to set up and worked great. Very solid and should last a long time.
Scritto da: David H.
I find that a garage can is better
I used it once on my 20 Hp Tohatsu, it worked ok. It seems to be well built. However I use my boat in salt water where I like to use a Saltaway flush; I throw a couple cap fulls in a garbage can with water and it does a better job. I’m not real sure but I think running a garden hose for 10 minutes might be using too much water…plus I can use the extra Saltaway water more than once and use it to clean my boat’s haul…
Scritto da: Roman Mironenko
Long Term review a bit long but thorough in my opinion.
I purchased this Flusher 11 months ago and have been using it just about every weekend since. Great purchase and would Recommend to a friend. the pisser comes out stronger with these than it does with the one you get at Wal-Mart, clearly more water flow do to the dual tube design. However there are what I consider negatives to the product in terms of long term use, if you find a year considered long term. The muffs from the get go don't like to stay on to tight especially if your motor moves around on its mount, this could be because I have a 99 Mariner 90hp and its a bit of a child getting a hair cut. may possible be my situation only. Id just keep an eye on em do to having one time where I left the motor on a flush and went inside for a beer. bit shortly after a knock on the door from my neighbor saying "your muffs fell off and that motors been running dry for a few minutes". But that may have been my fault do to walking away. One would think the suction of the motor would keep em on there. Guess not, only happened once though. And last is a no brainer and most likely would happen do to age and material of the product which once again resulted to no water going to the motor for a short period of time. the part that screws on to the hose is a 2 part fitting. one is a free spinning part that screws on the hose the other is a housing for that said part which then connects to the tubes and etc. The Screw on portion ejected out of the housing resulting in water starvation to the engine. The hose screwed portion is connected and sealed with what seems to be a standard silicone sealant in which quality is sub par. A simple fix was to remove the old and add a better quality marine grade sealant. It has been a month since the repair and its nice and tight in its housing while still spinning freely. this has been a fix to my said negatives so far and may have just been a problem tailored to my use. Other than that the product is awesome for the price, as always you get what you pay for. Thanks for taking the time to read my review.
Scritto da: Rick Biggs
Nice upgrade
Works so much better than the flusher that only sends water out of one side.
Scritto da: Michele R. Anderson
Worked for Yamaha VF115
This worked fine for our Yamaha VF115 SHO. I little leakage at the tips, but plenty of water to run the engine for 5+ minutes to do the oil change.
Scritto da: landshark
This marine motor flusher works well.
I have a 2021 model Mercury 9.9 H.P. outboard motor that I bought this for. I was concerned about fit and quality but as it turns out, it worked fine. Not cheaply made and will last a long time if you take care of it.
Scritto da: Captain Japan
Made for larger motors.
This model is made for bigger outboard motors. 50 hp and up. It delivers lots of water to both ports and has a good seal that's big enough to cover both ports completely. It's the model you see a lot of pros using to demonstrate how to flush or winterize your motor. Works great. Glad I bought it.
Scritto da: Garrett Russ
Good product
Item is as described, Works well on all three of my motors and flow rate is adequate for my 100hp Johnson.
Scritto da: zarko bohacec
Awesome
Does exactly what it's supposed to. Does not leak, quality product.
Scritto da: Richard
Super
Très satisfait

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array