Прозрачный строительный клей Gorilla Max Strength, тюбик на 2,5 унции, прозрачный, (2 шт. в упаковке) 2 шт.

Brand:Gorilla

3.6/5

47.35

Электропроводящая клейкая лента 3M 9703 представляет собой специальную электрическую ленту толщиной 2 мила. Нити в конструкции этой ленты обеспечивают электропроводность по оси Z толщины, но изолируют электричество вдоль плоскости. Этот продукт специально разработан для электрического соединения и механического соединения гибких схем с другими гибкими схемами, печатными платами (PCB) или ЖК-экранами. Этот продукт обеспечивает превосходную адгезию к меди, золоту, эпоксидной смоле FR-4, полиимиду, полиэстеру, алюминию, нержавеющей стали и гладкому прокладочному материалу.

Нет доступных единиц
ПЕРЕМЕЩАЕМЫЙ, ЗАПОЛНЯЮЩИЙ ЗАЗОРЫ, ПОДХОДЯЩИЙ К КРАСКЕ, ЛЕГКО ОТЛИЧАТЬСЯ. Невероятно прочный в ЛЮБОЙ ПОГОДНОЙ ситуации. 100% ВОДОНЕПРОНИЦАЕМЫЙ и работает под водой. СУХОЙ КРИСТАЛЬНО ПРОЧНЫЙ. НАША САМАЯ СИЛЬНАЯ формула строительного клея - в 2 раза прочнее, чем строительный клей Gorilla Heavy Duty Ultimate.
Brand Gorilla
Compatible Material Foam, Wood, Fiberglass, Glass, Stone
Item Form Foam
Material Ceramic,Glass,Wood
Usage Outside; Professional, Inside; Amateur, Inside; Professional, Outside; Amateur

3.6

8 Review
5 Star
75
4 Star
14
3 Star
6
2 Star
2
1 Star
3

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: Melissa Murphy
Great stuff
I keep this in what I call my "house first aid kit." We bought a house last year and it needed a total remodel. After living here for awhile I started to see little things. A wood shelf that was juuuust short of being snug and stable against the metal peg. Numbers fell off the old mailbox. It was nothing serious but different materials with different needs. This stuff fixes it all and I don't have to search for the right adhesive. So far, fingers crossed, this has bonded everything I've needed.
Scritto da: Tina
Give it 24hrs to harden and you cannot get it off except with a chisel. Be careful!
So do not allow glue to get on your fingers and thence onto the part you are gluing - which may be hard to avoid. Thus do not use the supplied nozzle when only a tiny amount will likely be needed and the nozzle, even when cut to the smallest diameter, gushes forth a great gob of glue. And as pointed out elsewhere, the nozzle itself retains more glue than you will likely need. What a waste. Plus the usual fix of pushing a nail (or similar) down the nozzle to keep it open when done will likely leave you with a nail stuck (glued) forever in place lest you have pliers at hand to wrestle it out. BTW: I like clamp pliers for such a task. Rather unscrew the tube cap and use, say, a wooden toothpick cut in half so you can use the fat end and gently scoop out the exact amount of glue you think you will need and carefully smear this tiny dollop on the surface(s) to be glued. Throw away the toothpick which will glue itself to the wastebasket. Oops! Wrap the toothpick in a scrap of paper towel - that should do it. Immediately re-screw the cap, being sure to get the air out. How? I leave that up to you. If this defeats you, then declare victory and move on. Yes, so be careful. This stuff is liquid iron. Acetone, WD40, Goo-Gone is like rain of a duck's back: ignored. Net: A superb product but be careful. This is Elmer's x 1000. Would we here at Tina's house buy it again? Without a doubt when we run out or it self-hardens but as little is needed to do the job, it may be awhile. Give it a try, y'all!
Scritto da: Brandi
Works for some things but not others
It seems to dry in like a silicone texture. I used it for a repair on a coffee table leg and it’s so far been about a week and it’s still holding up. I also used it for a repair on my glasses and unfortunately that didn’t hold more than a day or 2. The pin came out which made my glasses arm separate from the rest of the frame. The glue did not hold it inside where it’s supposed to sit long. Seems like it works better on some surfaces, despite claiming to work for nearly all surfaces. Also it’s very greasy feeling and kind of hard to clean from the provided spout.
Scritto da: James Aviles
takes a long time to dry
takes a long time to fully dry, I think it was 2 days before the glue stopped feeling a little mushy. but its very strong stuff, securely holding a brush at the end of a stick for me with no issues.
Scritto da: Victor
My guitar is back
This guitar’s headstock was broken in 2006 and I had it professionally repaired once and it broke again. I then repaired it again myself using Tightbond wood glue… it broke again. Finally after several years and having given up, I tried Gorilla Glue Max Strength and Gorilla’s strongest tape and so far so good! It’s been a couple of days and so far so good. Finger’s crossed that it keeps holding up.
Scritto da: Kim
Great for vinyl fence components
I bought some fence units that go around hvac units. The end plugs and peaks that slide into the tube parts kept coming out. This clear glue worked. Just use some blue painters tape to hold together for an hour or so.
Scritto da: Tim
Used for rug edge binding
This worked well enough, but was very thick. Was hard getting it out of the tube.
Scritto da: Billal nakbeen
EH!
It wasnt great since it was easily pulled apart but It worked

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array