Reliable Hardware Company RH-9006-SET-A Набор роликов для вилки, черный и серебристый, 2 дюйма, резина

Brand:Reliable Hardware Company

3.8/5

46.30

Длина 1,50 дюйма, диаметр штока 0,44 дюйма, диаметр 2 дюйма, резиновое колесо, диаметр O.A.H. 2,50 дюйма. Номинальная нагрузка - 100 фунтов.

EAN: 0856248005716

Категории Tools & Home Improvement, Hardware,

Номинальная нагрузка - 100 фунтов. 2,50 дюйма О.А.Х. Резиновое колесо диаметром 2 дюйма. Шток диаметром 1,50 дюйма и диаметром 0,44 дюйма.
Brand Reliable Hardware Company
Exterior Finish Rubber
Item Diameter 2 Inches
Item model number RH-9006-SET-A
Manufacturer Bienz & Fowlks dba Reliable Hardware Company
Material Rubber
Product Dimensions 7 x 1.75 x 5 inches; 1.79 Pounds
Rim Size 2 Inches
Size 2 inches
Wheel Size 2 Inches

3.8

8 Review
5 Star
83
4 Star
11
3 Star
3
2 Star
0
1 Star
2

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: bob amos
Exact copy of the original
These casters are the EXACT duplicate of the Fender originals. And... at less than half the price. I have a number of amplifiers and some of the Fender amps have the original casters installed at the factory in Corona, California. I compared these and they are EXACT copies. I would venture to say that these are probably made by the same people as the Fender casters. I saw absolutely no difference. Installation was sort of easy but still took some work. I was fortunate having the originals on another amplifier to determine the proper location. Do take note that if you are installing them on your amp, the feet that are presently on the amp stay in place and these are installed near those. Also be sure to look at any items that are in the amp that might be in the way when you are cutting the holes. I used a Forestner bit to cut the hole for the caster insert. They include 4 swivel caster wheels and 4 inserts to accept the casters. These casters can be popped in and out of the inserts as needed. No screws are included so you will need to find 16 screws for securing the inserts. If you are considering installing casters on your amp of any kind, these are probably your best choice...
Scritto da: Potentially You
Fits 1980’s Yamaha G100-212ii combo
Casters snapped right in, no need to even install the new plates.
Scritto da: Wizard
Works
Works
Scritto da: R. beck
Perfect for my Guitar Speaker Cabinet
I thought I'd be smart and buy Polyurethane casters for my 4x12 speaker cabinet. Turns out, those types of wheels are good for chairs, not so good for music equipment. The stem on those is too short and they wobble around inside the insert. These casters, however, have a nice long shaft and are a perfect replacement for the failing casters on my speaker cabinet. They were really easy to install, don't wobble and look exactly like the OEM casters.
Scritto da: JCHouston
Installed on Peavey 5150 212 amp
Perfect fit for a very heavy Peavey 5150 212 combo amp, snapped right in. Makes it much easier to shift around the room now. I find it doesn’t lock in place so be careful if you need to pick up the amp that they don’t fall out at random.
Scritto da: Bruce A. Diamond
bingo! roll on!!
These casters are perfect for most any modern bass amp made overseas. I have an acoustic B210 [ 4x10 cab ] and they fit prefect , are strong . smooth and cost a good bit less that any others. . I didn't need them , but they also come with the metal inserts and screws .
Scritto da: Creepshow
Fit Ibanez Tone Blaster Xtreme
Fit my Ibanez TBX 412 perfectly. I didn't take a picture side by side but they were obviously the EXACT same specs.
Scritto da: Rich Moore
Solid product. Good quality.
Good quality wheels. Use a 9/16 spade bit for installation.

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array