Сменный пьезовоспламенитель Magma с проводом, электродом и винтом для грилей серии Marine Kettle 2 Gas и Gourmet

Brand:‎MAGMA

3.4/5

54.32

Описание Renogy Wanderer-Li — это контроллер заряда от солнечных батарей с ШИМ на 30 А, который объединяет эффективную зарядку с ШИМ для увеличения срока службы батареи и повышения производительности системы. Разработанный с простым интерфейсом для простоты использования, контроллер использует несколько светодиодных индикаторов для уведомления пользователей о состоянии заряда и информации об аккумуляторе. Эта недавно улучшенная модель имеет две дополнительные функции: порт RS232 и зарядку литиевой батареи. С добавлением порта RS232 пользователи теперь могут подключаться и обмениваться данными с Bluetooth-модулем Renogy BT-1. Добавив BT-1 к Wanderer-Li, вы теперь можете использовать приложение для смартфона DC Home для удаленного мониторинга и настройки вашей солнечной системы. С включением режима литиевой батареи 30-амперный контроллер отрицательного заземления теперь может заряжать различные типы 12-вольтовых батарей и батарей, включая большинство 12-вольтовых литиевых моделей, доступных на рынке. Примечания по установке: Исходное положение люков терминала контроллера Wanderer по умолчанию закрыто (в верхнем положении), что может ошибочно выглядеть как открытый люк для проводов. Убедитесь, что СНАЧАЛА опустите каждую клеммную крышку, закрутив клеммы против часовой стрелки, чтобы открыть крышку проводной клеммы. ЗАТЕМ закрепите каждый кабель, повернув винты по часовой стрелке до закрытого положения. Простая установка: полностью откройте люк (против часовой стрелки), вставьте соответствующие провода и полностью закройте люк (по часовой стрелке). Если у вас есть какие-либо вопросы относительно этого продукта, позвоните нам по телефону 1 (909) 287-7111 или напишите по адресу support@renogy.com. Основные характеристики Оптимизирован для системы 12 В; Готовы варианты герметичных, гелевых, заливных и литиевых батарей глубокого цикла. Интеллектуальная 4-ступенчатая ШИМ-зарядка (Bulk, Boost, Float и Equalization) и температурная компенсация увеличивают срок службы батареи и улучшают производительность системы. Интеллектуальная защита от обратной полярности, перезарядки, короткого замыкания и обратного тока. Несколько светодиодных индикаторов для легкого считывания состояния заряда и информации об аккумуляторе. Встроенный порт RS232 позволяет обмениваться данными с модулем Bluetooth BT-1 и использовать приложение для смартфонов DC Home. Пакет включает в себя контроллер заряда Renogy Wanderer Li 30A PWM 1 x

Нет доступных единиц
Предназначен для грилей серии Marine Kettle 2 и Gourmet. Включает провод, электрод и винт. Гарантирует надежную подсветку кнопок. Запасной пьезоподжиг для некоторых грилей Magma.
Brand Name ‎MAGMA
Color ‎One
Customer Reviews 4.4 4.4 out of 5 stars 140 ratings 4.4 out of 5 stars
Included Components ‎Piezo Lighter
Item Dimensions LxWxH ‎7.09 x 5.12 x 1.97 inches
Item Package Dimensions L x W x H ‎4.69 x 3.74 x 1.06 inches
Item Weight ‎40.82 Grams
Manufacturer ‎Magma Products
Material ‎Other
Model Name ‎Magma Products
Number of Items ‎1
Package Weight ‎0.06 Kilograms
Part Number ‎10-960
Sport Type ‎Boating
Suggested Users ‎unisex-adult
Warranty Description ‎Manufacturer

3.4

11 Review
5 Star
69
4 Star
13
3 Star
10
2 Star
2
1 Star
5

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: Kimberly S.
Worked perfectly
Shipped fast and worked perfectly. The grill is back up and running.
Scritto da: Cary Alburn
A simple, effective lighter—that is very difficult to install
I’ve had my Magma Kettle 2 for many years—it’s a great little BBQ. But when its lighter stopped working this past September, I discovered how hard it is to light without it, whether with matches or a separate lighter. So I wanted to replace its lighter. It came very quickly—but without instructions, and my Kettle’s instructions had gotten wet so that they were unreadable. I was able to figure it out, but it is a chore and a half to replace the lighter. That’s the reason for the 3 star rating. Two pluses: although it’s difficult to install, it fits perfectly, and it works. There have been many changes in the details of the Kettle 2 over the years since I bought mine, but none of those changes have affected the fit. Secondly, when I later contacted Magma to ask if instructions for my particular older model were still available, they immediately emailed a pdf of them. I was able to confirm that my installation without them was correct.
Scritto da: KKid
Remove burner first
It was so difficult to disassemble my magma grill that I returned the replacement igniter and just purchased another magma grill. To replace the igniter you have to remove the burner, which actually holds all the grill components together. Don't buy an igniter until you have successfully removed the burner. It is conceptually simple, but one rusted in place it is very difficult to remove, because it is very difficult to grasp anything sufficiently on the grill to apply enough torque to remove the burner.
Scritto da: Elk
Could be better
I’ve bought three of these in 8 years. First, the electrode lead broke, then the brass nut snapped off and the lead couldn’t be attached. We’ll see what happens next.
Scritto da: Scott D
Works Good with Magna, a little tricky to Install Based on the Magna Mount
I replaced the Igniter on my Magna Grill after three years. The only challenge to install this is that you will have to bend the mounting plate sides to gain access to the back of the nut on the manga grill. Be careful when bending the mounting tabs of stainless steel as you can get cut easily on the grill. Install is simple, gain access to the rear tightening know , lug in the lead, tighten and you are good to Go.
Scritto da: R. Atkins
Fits well and does the job
This is the only solution to replace a burned electrode wire and broken ceramic in a Magma BBQ. Seemed like overkill to have to purchase the spark generator in order to get the ceramic electrode and wire. The package contained two types of electrodes (no doubt for the different models) and the spark generator. The spark generator and electrode for my 'kettle' style BBQ fit properly and work well. Sure wish they used stainless steel for the mounting tab on the electrode because this is what rusted and failed on the old one and eventually caused the wire to fail and the ceramic to crack.
Scritto da: Garnett J.
New design works well
The new design of this Piezo igniter has it’s own grounding probe. No longer does it rely on the burner to be grounded.
Scritto da: Amazon Customer
Great product
Great product, fit my bbq, and works like a champ
Scritto da: Bernie Babineau
Works good
Easy to install
Scritto da: ornella
It was a try but it failed
No good, once fitted did not work wasted time and money
Scritto da: Best of Brit
Doesn’t work, no spark
After spending over two hours installing the electrode I finally installed the piezoelectric button and it didn’t work. I would suggest the this manufacturer has no QA or QC. Basically useless and a waste of time.

Сопутствующие товары

hot
Супко ССН24
3.3/5

€ 71.95

Супко ССН24
3.3/5

€ 71.95

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array