Sungold Abrasives 30516 Aluminium Oxide 80 Grit Rolls для барабанных шлифовальных машин, ширина 3 на 35 футов

Brand:Sungold Abrasives

3.2/5

74.00

Крепление гаек на резьбовом стержне может быть затруднено из-за ограниченного пространства и препятствий вокруг стержня. Боковые движения ограничены. На длинных участках резьбового стержня традиционные гайковерты опускаются вниз, поэтому вы можете достать гайку только до упора по стержню. Гайковерт Klein для тяжелых условий эксплуатации имеет полностью полый вал со сквозной рукояткой, что позволяет заворачивать гайки на болтах неограниченной длины. Вспомогательный ключ обеспечивает больший крутящий момент, а магнитные наконечники должным образом захватывают любую гайку.

Может использоваться для любого применения, где требуется обрезка по размеру. Используйте полосу на машине в качестве шаблона, чтобы вырезать новую полосу. Можно сделать 4 полосы для 16 барабана типа Jet16-32. Оксиды алюминия премиум-класса веса X быстро режут и выдерживают самые сложные шлифовальные операции. Для использования с барабанными шлифовальными машинами, чтобы сэкономить деньги, нарезав полосы самостоятельно.
Backing Type Paper
Backing Type ‎Paper
Batteries Required? ‎No
Brand Sungold Abrasives
Brand ‎Sungold Abrasives
Color Gold
Color ‎Gold
Compatible Material ‎Wood, Metal, Stone
Customer Reviews 4.2 4.2 out of 5 stars 175 ratings 4.2 out of 5 stars
Grit Number ‎80
Grit Type ‎Medium
Included Components ‎Abrasives Roll
Item model number ‎30516
Item Package Quantity ‎1
Item Weight ‎0.01 ounces
Manufacturer ‎Sungold Abrasives
Material ‎Aluminum Oxide
Package Dimensions ‎6.73 x 6.54 x 3.54 inches
Part Number ‎30516
Product Dimensions 420"L x 3"W
Product Dimensions ‎420"L x 3"W
Size 80 Grit
Size ‎80 Grit
Unit Count ‎35.0 Foot

3.2

8 Review
5 Star
60
4 Star
21
3 Star
7
2 Star
2
1 Star
10

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: Richard
Great for a drum sander
Drum sanders exist in a somewhat obscure niche of woodworking - higher end than a lot of home shops have use/space for and to low end for a pro shop that would otherwise use a wide belt sander. Not to mention that there are few definitive sources for how to cut a proper angle/taper on an abrasive so it properly fits a drum sander. So lots of folks who own drum sanders stick with buying overpriced products with pre-cut tapers and pre-determined lengths specified for their model of drum sander. Once you figure out the math and technique, however, the world is yours for buying abrasives in bulk at much lower cost than the manufacturer of your drum sander and its distributors would sell them for because you can buy any width you want, allowing you to prioritize price rather than being dependent on using an exist wrap as a template. That is where getting the math right is crucial because I purchased this thinking it would give me 4 wraps for my 18-36 Delta 31-250 drum sander, but I was wrong and I can only get 3 with a ton left over (but not enough for a 4th wrap). That is not a knock on this product, because it was entirely my fault. Given my experience I would trust the product description that says you could get 4 wraps for a 16-32 drum sander, but I cannot verify it. So here is the math for determining the length you will need for a single wrap of your drum sander drum: ((Circumference of the drum * length of drum) / width of abrasive) + circumference of the drum In my case that works out to being 110.25 inches per wrap. So I needed to buy one step up from this (38 feet) to get 4 wraps, but again, that is entirely my fault. I’ll leave it to you to go find a video or write up about how to cut the tapers properly, but I don’t trust the formulas used by most places since everything I read forgot to add the last “circumference of the drum” and therefore bought the wrong product.
Scritto da: robert d.
Roll was short ~ 1 foot.
Roll was short ~ 1 foot which limited number of segment lengths achievable for drum sander thus wasting paper and value.
Scritto da: Customer Review
Very aggressive
Installed on grizzly drum sander and so far I’m pleased by the amount of wood it takes off
Scritto da: Amazon Customer
Easy to work.
I used this on my 18” finish sander from Grizzly. Holds up well does not clog up like cheap sandpaper.
Scritto da: Frank Switalski
Not durable at all.
Upon second use paper ripped on relatively small passes. Would be a one if not for the price.
Scritto da: M Krebs
good sandpaper
Bought this for my Jet drum sander to save money. Turns out it's also vastly superior to the precut junk that Jet sells. Cuts well, doesn't clog up so bad.
Scritto da: dmann
Works for my Preformax drum sander
The price is good and quality is fine. I will be buying more as needed.
Scritto da: Dwayne Brown
Not very durable.
Doesn't last as long as other brands I've used.

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array