TotalBoat Flotation Foam - 2-компонентная расширяющаяся полиуретановая морская пена для плавучести, изоляции и звукоизоляции лодок (плотность 2 фунта, комплект 2 галлона)

Brand:TotalBoat

3.6/5

258.81

Будьте безопаснее и комфортнее на своей лодке с двухкомпонентной морской расширяющейся пеной Total Boat. Эта пена для заливки, соответствующая требованиям Береговой охраны США, обычно используется для повышения плавучести, чтобы удерживать лодку на плаву, если целостность корпуса нарушена. Его пенопластовая структура с закрытыми порами позволяет ему противостоять водопоглощению в течение многих лет, что делает его идеальным для заполнения понтонов и полостей в байдарках и под палубами лодок. 2 фунта набор расширяющейся по плотности уретановой пены смешивается с образованием быстросхватывающейся текучей жидкой пены, которая при отверждении превращается в жесткий и легкий материал, который также отлично подходит для заполнения зазоров, звукоизоляции, теплоизоляции и неструктурной поддержки в различных морских, бытовых и художественных изделиях. применения. Двухкомпонентная флотационная пена имеет простое соотношение смешивания 1: 1, что упрощает ее использование. Теплые условия 75-85 ° F очень важны, как и точное измерение, тщательное перемешивание и надлежащая вентиляция области, где должна быть нанесена пена, потому что она сильно расширяется по объему. Просто смешайте одну часть смолы и одну часть активатора, энергично перемешайте в течение примерно 25 секунд до полного перемешивания и сразу же налейте на подготовленную поверхность. Расширяющаяся пена будет распределяться равномерно, даже в областях неправильной формы. Затвердевший пенопласт затвердевает с минимальной усадкой, и его можно легко обрезать. После полного отверждения все участки, подверженные воздействию солнечных лучей, следует заламинировать или закрасить полиэфирными, эпоксидными или винилэфирными покрытиями. Для достижения наилучших результатов при заполнении больших площадей налейте несколько слоев, чтобы обеспечить надлежащее отверждение и максимальную прочность сцепления между слоями. Всегда надевайте надлежащие средства защиты глаз, лица и одежды, когда смешиваете и заливаете двухкомпонентную морскую пену. Трехслойная пена для лодок. Все продукты TotalBoat обеспечивают отличное соотношение цены и качества и отличные результаты. 100% сделано в США.

ДОСТУПНО В КОМПЛЕКТЕ НА 2 КВАРТА И НАБОРЕ НА 2 ГАЛЛОНА; Выход: 2-квартовый комплект – 2 кубических фута; Комплект на 2 галлона – 8 куб. футов; Диапазон плавучести для 2-фунтовой пены: 75 фунтов на смешанный 2-квартовый комплект и 300 фунтов на смешанный 2-галлонный комплект; срок годности 6 месяцев с даты изготовления. ИДЕАЛЬНАЯ РАБОЧАЯ ТЕМПЕРАТУРА 75-85°F; правильная температура, время, смешивание и вентиляция имеют решающее значение для надлежащего расширения пены; ниже 75°F расширение уменьшается; после смешивания пена быстро расширяется и становится жесткой, поэтому заранее очистите поверхность и будьте готовы к заливке. 94% ПЕНА С ЗАКРЫТЫМИ ЯЧИКАМИ: идеально подходит для морского применения; сопротивляется водопоглощению и повреждению от газа, масла или растворителей; после отверждения пенопласт можно покрыть полиэфирной, эпоксидной или винилэфирной смолой; также можно легко разрезать или вырезать по форме. ЛЕГКО ИСПОЛЬЗОВАТЬ: жидкая уретановая пена для заливки имеет простое соотношение смешивания 1: 1, быстро расширяется и затвердевает на месте примерно через 5 минут. при 70-80°F; для создания нескольких слоев для заливки под палубы лодок заливайте пенопласт отдельными партиями. ЛЕГКАЯ, ДВУХКОМПОНЕНТНАЯ ПОЛИУРЕТАНОВАЯ ПЕНА: идеально подходит для придания плавучести, теплоизоляции, звукоизоляции и заполнения зазоров или пустот; только для неструктурных приложений; протестировано в соответствии с Постановлением береговой охраны США № 33 CFR 183.114.
Brand TotalBoat
Color Clear
Compatible Material Vinyl
Is Discontinued By Manufacturer No
Item Form Liquid
Item model number TB-FOAM
Manufacturer TotalBoat
Material Polyurethane Resin
Product Dimensions 8.5 x 6.5 x 10 inches; 20 Pounds

3.6

9 Review
5 Star
81
4 Star
9
3 Star
4
2 Star
2
1 Star
4

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: bugalou
Some hints for people using this.
So I have used a ton of this for a few projects. This will hopefully help some of you guys. 1: buy a couple just jugs of acetone. It really helps cleanup the sticky goo you will have to deal with. 2. Invest in the cheap plastic mixing cups with the proportion lines. If you are doing semi enclosed areas don't poor to much in so the foam can full expand and you do not waste product. 3. Buy one of those cheap rechargable milk froather mixers they have for coffee. It makes mixing things way easier and more consistent. It will likely be ruined after, but they are only like 12 bucks. 4. Buy some small silicone scrapers like what you use for the kitchen. If you let them sit in acetone in a cup, you can use it to scrape the left overs from your mix cups after you pour and save some mess. You can usually get several Uses out of each cup doing this and reduce the mess. 5. Nitrile gloves are must. This stuff gets every where.. You can use Acetone to clean up. 6. Probably the most important part - chill the two parts in the refrigerator overnight. This slows the reaction and gives you time to actually mix it throuroughly and pour it without having to rush around. Once it warms. It will behave normally and start expanding. Lastly if you spill it on accident, left it dry completely before cleaning up. It's much easier to dea with dry. I'm working on an idea to hook this to a gun the auto mixes components and despenses it in a more controlled manner. If I have any success I will post and update.
Scritto da: Curtis Hall
Trial and Error, Read the directions first. I did and still has a learning curve.
Applying concoction into sit on top kayak Started out not liking it much. It's early November in Central Texas and the outside temperature was around 80 degrees, the sun was out and warm. The cans were stored in my shed, and the temperature of the resin and activator were probably around 50 degrees. I mixed up a little bit of this stuff into a wash basin and put it in my kayak. The stuff didn't really foam up. Realization: Just because the outside temperature is 80 degrees still does not mean that the foam will work. I found a pot large enough to put one can in at a time (wife was watching TV at the time :). Light up the stove top and bring the temperature of the resin and activator to around 80 degrees (shake in a circular motion to mix hot and cold, I had to put on the stove 3 times per can). I used my hands to measure the temperature. Nothing scientific. I screwed off the top of the foam can and had to poor it quick... It was trying to foam up. I used a wash basin to mix the 2 together. Don gloves, this stuff adheres to everything and is difficult to remove. Ensure that the hole that you are putting this stuff into is fairly large (Mine is almost the size of my head and still got this stuff all over my kayak.) It worked ok at first, but after the first batch started to heat up the inside of my kayak the rest of the stuff worked like a charm. It filled up the whole back end of my 2 person kayak. After it's done foaming it turns hard. I can still scrape it with my fingernail. But, for filling the void and stabilizing the outside hull, it did a superb job. I just bought a second batch to fill up the front end of my boat. I hope this helps.... happy foaming :) Second purchase I didn't have to heat up since I left it out in the sun. Kayak was in the sun as well and this stuff worked great. I mixed up a little at a time, and then pour it in. This time after the pouring in 2-3 batches I took the kayak off the shed it was leaned up against and turned it topside down to spread the foam all over. It still worked great but got some on my hands this time... they turned black. I rubbed them against a brick wall and the blackness deteriorated. Not completely gone but it's not as prevalent.
Scritto da: Satisfied
Easy to use if following directions
Easy to use if you follow directions. Must mix fast and pour quickly.
Scritto da: Sean hayes
Saved my skiff!
I am so happy that I decided to go with this product because it literally saved me from having to buy myself another boat. I'm sure you all have heard of Carolina skiff's notorious problem with water in the haul and unfortunately that's exactly what happened to me. Took some of the floor up ripped up the waterlogged foam let the boat drive for about 48 hours and then I poured my foam. Make sure you mix it really good and you're absolutely 100% ready for the poor as it does rise extremely fast. The instructions were 100% accurate as it does take about 7 minutes to fully cure, and when it does it becomes extremely hard. If you do make a mess in your boat with the phone don't worry because it scrapes off with ease.
Scritto da: James Holaday Jr
The foam worked better than I had imagined
I used this foam in my 1974 Meyers Aluminum boat while I was replacing the floor. The foam worked better than I had imagined. It filled every nook and cranny and once I got the floor in it doesn't make a sound. Tips; Get the room your working in as hot as possible or if outside wait for a hot day. The hotter the area the more the foam rises and the more area you can fill per pour. Warning, try to measure the portions as close as you can because once this stuff gets going you will not be able to stop it and you will have a lot of waste from overflow. (I wasted about a quart in overflow) Make sure the foam has plenty of room to grow and has an escape for overflow. It bowed a metal plate I had riveted in the floor because it couldn't get out and I had to drill a hole quickly to give it room. Also this stuff is extremely sticky so clean your measuring cups and tools after each pour. Also purchase a drill mixer, you will not have enough time to properly mix the two parts by hand before it starts rising, which happens about 35 seconds after mixing starts. I have to say this is the most fun I have ever had during a project. I felt like a kid in science class watching the two chemicals mix and then start growing. I would recommend this product to anyone who is looking to fill space under a boat floor.
Scritto da: Anthony G.
Garbage
Product is supposed to be a 94% closed cell flotation foam product. Followed installation instructions and watched several videos and now have unusable Swiss cheese in my boat that will cost a fortune to remove!!!!
Scritto da: Christine Lafleur
Super
Donne les resultats escomptés. Je recommande.
Scritto da: Carol Hall
Easy application
Worked great , wish I had ordered more ????
Scritto da: Brandi
Product was amazing
Used this product for filling my boat and was very interesting watching it expand

Сопутствующие товары

hot
TotalBoat Эликсир Эмаль
3.6/5

€ 74.87

TotalBoat Эликсир Эмаль
3.6/5

€ 74.87

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array