Вал культиватора Stens, Troy-Bilt GW-1026A, шт., 1 (240-733)

Brand:Stens

3.6/5

114.39

Если вы хотите, чтобы ваше наружное силовое оборудование работало дольше и выполняло больше функций, вам нужны запчасти, аксессуары и навесное оборудование Arnold. Зимние запчасти и аксессуары Arnold, предлагающие вам широкий ассортимент высококачественных и безопасных для снега продуктов, помогут вашему снаряжению пережить эти холодные снежные месяцы. Совместимость с множеством крупных брендов, 50 с лишним лет проверенной производительности принесли Arnold репутацию передовых инновационных продуктов и обширного инженерного опыта. От базового обслуживания до крупных инноваций, у Arnold есть все, что вам нужно, чтобы оборудование работало так, как оно должно работать сезон за сезоном. С Arnold вы можете быть уверены в надежном продукте с точной посадкой, дизайном, материалом и конструкцией. В дополнение к надежным запасным частям и аксессуарам, простые в использовании инструкции и дополнительные советы Arnold облегчат обслуживание вашего оборудования и гарантируют, что вы выполните работу правильно.

Профессиональные дилеры доверяют запчастям марки Stens выполнять ремонт с качеством OEM. Название Stens указано на упаковке всех оригинальных продуктов Stens. Совместимость/замена для: Troy-Bilt: Horse. Заменяет номера OEM: Troy-Bilt: 1026A, GW-1026A. Спецификации: Описание: Вал граблины румпеля, вал с наружным диаметром 1,247, сужается до наружного диаметра 0,735 на обоих концах, общая длина 7, внутренняя резьба 1/2-20 на каждом конце, не включает шпонку; имеет 3 шпоночные канавки.
Brand Stens
Color Multi
Department Garden Tiller Parts
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 9 x 6 x 2 inches
Item model number 240-733
Manufacturer Stens
Material Metal
Power Source Ac/Dc
Product Dimensions 9 x 6 x 2 inches; 12 Ounces

3.6

10 Review
5 Star
81
4 Star
8
3 Star
5
2 Star
3
1 Star
3

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: roger
Works as designed
The shaft fit as designed. I used the T-B key for the gear and pressed the gear and bearing on and made new 3/16” keys for tine holders. Hint install right hand seal, after bearings and left side are installed, this leaves room to get the gear meshed with the worm gear.
Scritto da: SKIP
worked
Worked perfectly.
Scritto da: Paul
Good value overall
Good value overall. I purchased this shaft for my old troybilt horse with some reservation after reading some of the reviews on it. One or more people stated that the key-way did not fit very well and they were right. What the reviews that I read lacked were any details of the problem, and that is why I am writing this review- to remove the mystery. All aspects of the shaft fitment are good except the key-way. However, for the DIY people you can fix it easily. First, place the old key in the key-way of the old shaft and carefully observe how it fits in. The bottom of the key that fits into the key-way slot is U shaped. For me, It fits in width, but for me not in length and depth. Use locking pliers to hold the key, and a grinder to correct by carefully grinding a little of the bottom (of the U shape) and a little of the length of the key as well. Grind little and check often; remember to remove the metal burr that forms on the corner of the key from grinding it before each fitment check. If you have the ability to take this shaft out, you can easily correct the key fitment. Its a good idea to replace the two seals for this shaft while you have it taken apart for a quality long lasting repair.
Scritto da: tsspk
Great replacement, No Issues
The shaft I received in Oct of 2021 was in perfect condition with no machining issues. New bearings went on a little tighter than the old ones coming off of the old shaft, but no special tools required to assemble. A great solution for anyone with a damaged tine shaft.
Scritto da: Richard Harvey
Fits
This fit perfectly very happy with this product arrived on time.
Scritto da: Joshua G.
Great Replacement Part, but be advised...
This is a great replacement part at a very reasonable price. Although be advised, the shaft I recieved looked identical to my old part but the middle key slot for the bronze gear was not cut deep enough or wide enough. Neither my old key or new key would fit. I ended up grinding my key down to fit the slot (which you shouldnt have to do) and everything assembled perfectly. This is not the sellers fault, rather a manufacturing defect. It may only be my shaft like this or they may all be manufactured this way, who knows. I just think you should know my experience before committing to buying one. I only gave four stars due to this issue because otherwise the part fit wonderfully.
Scritto da: sewerat
It's all good now!
I was in need for an axle for my Troy Bilt Horse, I looked here and was skeptical about buying due to comments posted here. so this is what, I got an axle with all the correct dimension's far as key fitting in its slot and the three slot's being inline like the original. Its all good now.
Scritto da: Rick R.
Machined very well
My old 1976 troy-bilt horse tiller tine shaft had rusted too much to support a new seal. This shaft was machined perfect. Worm gear and bearings fit snug. I used a brass hammer and 1-1/2 PVC pipe to reinstall the gear and both bearings.
Scritto da: Bear
Correct item
It worked perfectly. Used on Troy-Bilt Horse tiller.
Scritto da: John E.
that you can still get parts for something 50 years old almost
packing almost lost parts

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array