Valley Industries 6541-01-CSK Половинное или полное безштанговое разбрасывающее сопло-52 фута, 10 отверстий, латунь

Brand:Valley Industries

3.4/5

64.50

Экономьте время и покрывайте больше площади с помощью универсальной латунной распылительной насадки Valley Industries без штанги. В крайнем случае, установите на широковещательный опрыскиватель одну насадку, обеспечивающую охват до 52 футов. Включает в себя 2 сменных колпачка, которые позволяют распылять под углом 90° и 180°. Распыление под углом 90° идеально подходит для случаев, когда во время нанесения возникают препятствия, такие как заборы или деревья. Распыление под углом 180° обеспечивает полное покрытие и идеально подходит для открытых поверхностей. Идеально подходит для использования с 12-вольтовыми насосами производительностью 3,0 галлона в минуту или выше. Изготовлен из латуни для повышения износостойкости. Имеет соединение ½” NPT и переходную втулку 3/8”. Идеальная высота установки от 24 до 48 дюймов.

Имеет соединение ½” NPT и включает переходную втулку 3/8”, руководство по эксплуатации,. Изготовлен из латуни для повышения износостойкости. Идеально подходит для использования с 12-вольтовыми насосами производительностью 3,0 галлона в минуту или выше. Включает в себя 2 сменных колпачка, которые позволяют распылять под углом 90 и 180 градусов. За считанные секунды установите на широковещательный опрыскиватель одну насадку, обеспечивающую покрытие до 52 футов.
Brand Valley Industries
Customer Reviews 4.4 4.4 out of 5 stars 82 ratings 4.4 out of 5 stars
Exterior Finish Brass
Inlet Connection Type National Pipe Tapered
Item Dimensions LxWxH 2.5 x 1 x 0.75 inches
Item model number 6541-01-CSK
Item Weight 8.6 ounces
Manufacturer Valley Industries
Material Brass
Product Dimensions 2.5 x 1 x 0.75 inches

3.4

8 Review
5 Star
63
4 Star
22
3 Star
7
2 Star
4
1 Star
4

Напишите свой отзыв

Ваш адрес электронной почты не будет опубликован. Все обязательные поля помечены*

Scritto da: allen
Should work well
It isn’t obvious to begin with but both caps need to be taken off and the one you want to use should be mounted first. One is for 180° spraying in one is for 90°. This wasn’t obvious in the directions
Scritto da: Eddie
Needs a little filing!
The media could not be loaded. This is a quality product. Mine needed a little filing. I have a 4gpm pump. When I hooked it up it had a 50 foot spray. The problem was that it was not spraying straight down. There was a 4 foot section in the center that was dry. I filed it a little at a time until it was perfect. As you can see in the video. I would recommend this spray nozzle.
Scritto da: rme
Works
I have 2 of these on a 100gal orchard sprayer. About 45' of good coverage around 40psi for 180 nozzle
Scritto da: Amazon Customer
Works great!
I did have to increase the size of the pump to 2.2 Gallons a minute on my spray tank to take full advantage of the 27-30 foot wide spray pattern.
Scritto da: WBrown
Works well
Excellent. Took a few swipes with a file to perfect the pattern - great after that. Would buy again, but shouldn't need to.
Scritto da: Pop36
Bad fitting
The 1/2 x 3/8 brass female bushings threads were damaged. I was unable to use it.
Scritto da: Erok Magnag
Horrible spray pattern
I run a commercial weed control business and have been purchasing spray equipment for decades. This nozzle, while looking nice and being quite robust, has a fatal flaw: There are numerous gaps in the spray pattern which render the nozzle useless.
Scritto da: Michael Curtis
Not great
Doesnt work well at all twice the pressure as advertised to get half the pattern width

Сопутствующие товары

Откройте для себя нашу международную сеть

Мы отправляем в 28 стран, более 200 000 товаров. Будьте в курсе, подпишитесь на рассылку.

Array