Blackstone 5019 propāna un dabasgāzes pārveidošanas komplekts 10 pēdu x 3/8 šļūtene, 7 mm uzgriežņu atslēga, 2 atveres, ātrā savienojuma adapteris lieliski piemērots grilam, grilam, picas krāsnij, terases sildītājs (der atsevišķiem modeļiem), pelēks

Name: Blackstone 5019 propāna un dabasgāzes pārveidošanas komplekts 10 pēdu x 3/8 šļūtene, 7 mm uzgriežņu atslēga, 2 atveres, ātrā savienojuma adapteris lieliski piemērots grilam, grilam, picas krāsnij, terases sildītājs (der atsevišķiem modeļiem), pelēks
Brand: BLACKSTONE
SKU: 0717604050194
Price: 96.22 EUR
Availability: InStock

Brand:BLACKSTONE

3.8/5

€
96.22

Vai jūs varētu atrast visas gāzes pārveidei nepieciešamās lietas vienuviet? Izklausās maz ticams, taču šajā Blackstone dabasgāzes pārveidošanas komplektā ir viss. Tajā ir divas dabasgāzes atveres plīts. Tajā ir arī gara dabasgāzes šļūtene grilam. Komplektā ir 7 mm uzgriežņu atslēga. Uzgriežņu atslēga ir saderīga tikai ar atverēm. Uzgriežņu atslēga atvieglo apstrādi ar atverēm. Šo atveri un šļūteni var izmantot uz krāsnīm. Šo dabasgāzes atveri klienti var izmantot arī uz griliem. Šajā Blackstone komplektā ir ātrā savienojuma stiprinājums. Turklāt šajā komplektā ir iekļauts arī ātrā savienojuma adapteris. Šos produktus ir viegli atgriezt un nomainīt. Blackstone nodrošina gadu garantiju. Arī atgriešanas procedūra ir ļoti vienkārša. Klienti bauda vieglu atgriešanu ekskluzīvā periodā. Uzņemieties atbildību par saviem bārbekjū. Iegūstiet šo Blackstone galda virsmas pārveidošanas komplektu jau šodien!

Summa

Pievienot grozam Pērc tagad

EAN: 0717604050194

Kategorijas Dzīvoklis, zāliens un dārzs, Grili un āra ēdienu gatavošana, Izstrādājumi un piederumi Ēdiena gatavošanas rezerves daļas, Grila savienotāji un šļūtenes,

Lielisks garantijas laiks: Blackstone visiem saviem produktiem piedāvā viena gada garantiju. Garantija attiecas pat uz dabasgāzes šļūteni. Klienti var brīvi izmantot garantijas priekšrocības 1 gadu. Uzņēmums nodrošina arī atgriešanu bez problēmām. Atgriešanas iespēja ir spēkā ekskluzīvu periodu. Ietver uzgriežņu atslēgu un adapteri: Šajā dabasgāzes atveres komplektā ir divas uzgriežņu atslēgas. Tajā ir arī divi ātrā savienojuma piederumi un adapteri. Viss komplekts ir ļoti ērts un efektīvs. Gluds dizains un vieglie materiāli ir bonuss. Daudzfunkcionāls: komplektu var izmantot plītīm un griliem. Šo dabasgāzes atveri varat izmantot arī terases sildītājam. Tomēr šī gāzes šļūtene un sprausla nav saderīgi ar Blackstone modeli 1891. Šī gāzes šļūtene ir piemērota dabasgāzei ar 7 collu ūdens kolonnas spiedienu. Nāk ar divām atverēm: Blackstone dabasgāzes atveres komplektā ir divas atveres. Šīs atveres var palīdzēt viegli pārveidot. Atveres ir savietojamas ar lielāko daļu režģu vai plīšu. Abas atveres ir mazas un gluda dizaina. Īpaši garš, lai atbilstu jūsu mērķim: šim dabasgāzes atveres pārveidošanas komplektam ir papildu šļūtene. Šļūtene ir 10 pēdas gara. Šo garo šļūteni var viegli izmantot ārpus telpām. Tas ir saderīgs ar dabasgāzi. Šī Blackstone šļūtene ir izgatavota no īpaši izturīgiem materiāliem.

Country of Origin	China
Customer Reviews	4.8 4.8 out of 5 stars 23 ratings 4.8 out of 5 stars
Item model number	5019
Item Weight	2.88 pounds
Manufacturer	Blackstone
Product Dimensions	10.24 x 2.36 x 10.24 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Harry S. Rex

Does the job

Does what it's made for.

Scritto da: JL

Works With 22" Adventure Ready With some tweaks.

So if you are looking to convert your 22" Blackstone Adventure Ready portable griddle with Hood and Stand, this will work with some modifications. After trying to remove the H tube out of the griddle forever, there was no way of getting it past the top lip they added to the back of the griddle where the hood would meet, no matter how you angle it, it will not come out. I did not want to cut any parts of the griddle as to not damage the protective paint. SO to gain access to the orfice that is placed inside the front of the H tube.... You will have to drill out a couple rivets on one side of the front face cover where the gas components and control knobs are. I opted for the right side where the propane tube connection is. Use a drill bit about the size of the rivet head hole, make sure the bit isn't as big as the hole the rivet goes through so you dont damage the cover paint. It should be quick, drill enough so you can use a plier or flat head to seperate the rivet head from the stem on either side. You will now be able to move the cover forward at an angle enough so you can drop the fuel nozzle down, in order to undo the smaller propane orifice and replace it with the two larger Natural Gas orifice provided. There are three screws behind each knob that holds the ignitor and fuel control orfice in place on the front face cover. BECAREFUL when tightening the NG orfice, triple check with hand before lightly hand tightening with tool. First one sat nicely and screwed in pretty hand tight. However my 2nd one did not seat right and somehow stripped the screw hole before it even got all the way in. I was not able to hand tighten in before it spun around and start catching a little again. There was some gas leak because of it. I was able to add extra layers of PFTE tape made for NG to help it seal completely and be able to tighten a little more. There were also issues with people stripping the orifice threads so it can go both ways. I feel like the largee cheaper set made for larger griddles with extra orfices would work also with this griddle; but I'm not positive if there are differences in sizes of the orfice screw or even tube connection size. DO NOT FORGET to use sealant or PFTE tape to seal the new orfices and tube connections. For me, I needed a 3/8 FL (Flare) male to 1/2 MIP (Male Iron Pipe) reducing adapter you can get at Home Depot or Lowes to connect the provided quick disconnect adapter to the 1/2" Gas line outside the house. You can get some screws and nuts also at the hardware store to tighten the front face cover back on where the rivets used to be. Look at the screws they use on the H tube if you want something that matches. I just temporarily used an insulated copper wire and looped it through the two holes to hold it in place. The NG needs to be first filled in the H tubes for several seconds when first turning on. Then turn it off and turn the knob to ignite and light the griddle. This is the only way I could light the griddle and has something to do with the design of the H tube and natural gas. Happy grilling, hopes this helps at least one person!

Scritto da: chris adams

Works good

Nice kit and works as should, only problem was a connector leaked and had to be resealed, third time was the charm and no leaks

Scritto da: Annie L Poole

Easy install

After changing the orifice, the flame looks good. The only concern I have , it may work too good. The flame is too high when the control knob is on high. The cooking serface overheats fairly easy.