Campbell Hausfeld 3/8 NPT regulators ar mērierīci (PA212303AV)

Name: Campbell Hausfeld 3/8 NPT regulators ar mērierīci (PA212303AV)
Brand: Campbell Hausfeld
SKU: 0045564200190
Price: 82.78 EUR
Availability: InStock

Brand:Campbell Hausfeld

2.2/5

€
82.78

Nodrošina regulētu izejas spiedienu no 0 PSI līdz 125 PSI pareizai instrumenta darbībai. Pašatvienojošās konstrukcijas atver gaisa plūsmu pa straumi, lai atvieglotu regulēšanu. Spiediena bloķēšanas poga novērš nejaušas spiediena izmaiņas. Ietver spiediena mērītāju no 0 PSI līdz 150 PSI. 120 SCFM plūsmas jauda pie 90 PSI. 3/8 collas NPT sieviešu pieslēgvietas. Pabeidziet savus projektus ātrāk un vienkāršāk ar Campbell Hausfeld. Gaisa enerģijas eksperts®

Summa

Pievienot grozam Pērc tagad

EAN: 0045564200190

Kategorijas instrumenti un mājokļa labiekārtošana, Elektroinstrumenti un rokas darbarīki, Elektroinstrumentu daļas un piederumi, Airinstrumentu daļas un piederumi, Airu- Kompresoru piederumi,

34 SCFM plūsma pie 90PSI ieejas. Spiediena bloķēšanas poga novērš nejaušas spiediena izmaiņas. Pašatvienojošās konstrukcijas izvada pakārtoto gaisu, lai atvieglotu regulēšanu. Nodrošina regulētu izejas spiedienu no 0 līdz 150 PSI pareizai instrumenta darbībai.

Batteries Included?	‎No
Batteries Required?	‎No
Country of Origin	‎Taiwan
Customer Reviews	3.2 3.2 out of 5 stars 25 ratings 3.2 out of 5 stars
Included Components	‎Regulator with Gauge
Is Discontinued By Manufacturer	‎No
Item model number	‎PA212303AV
Item Package Quantity	‎1
Item Weight	‎2.46 ounces
Manufacturer	‎Campbell Hausfeld
Material	‎Plastic
Measurement System	‎Metric
Part Number	‎PA212303AV
Power Source	‎Air Powered
Product Dimensions	‎3.6 x 3.6 x 7.8 inches
Size	‎Standard
Warranty Description	‎1 Year Limited Warranty

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Larry J. Guthrie

Fit and finish is typical Campbell Hausfeld. Does the job but does not deserve 5 stars.

Scritto da: DeanL

Not as pictured

Not as pictured. I should have checked the part number. PA212303AV will not work for my application. The one in the picture does. Sending it back.

Scritto da: Mike

Good regulator, and some advice

I replaced my OEM regulator after about five years. Same brand. New one works great. A bit of adivce...I installed a shut off valve between the tank and the regulator so pressure is no longer on the regulator 24/7. I leave my shop compressor on all the time so I have air whenever I need it. Old configuration had the shutoff valve after the regulator. Constant 90 psi pressure likely lead to the old regulator's seal failure after 5 years, which I believe is testimony to the OEM valve's quality. With new valve configuration, my tank holds full pressure for more than a week when not in use.

Scritto da: Justin Lott

Failed after 11 months

This unit worked pretty well and was about what you'd expect from a pressure regulator... for a little less than a year. I have left this set @ 90PSI pretty much since the day I installed it. I have adjusted it maybe 5 times. About a week ago the pressure started creeping up on it's own and the over pressure release would continually hiss. I have verified that the gauge itself is fine. The regulator is what has failed after less than a year of just sitting there doing nothing. Additionally, this is one of those units that you have to overadjust if you set the pressure too high. What I mean by that is that if you happen to pass the mark for the pressure you want, you can to turn it counterclockwise a good 5-10 turns before the pressure actually starts to drop, then turn it back up again to get the pressure you were after. That's a pretty minor thing though... just something to be aware of.

Scritto da: J. Piwaron

easy regulator

I got this regulator to replace an identical unit that apparently got stuck in the over pressure venting position. It's a nice easy to use regulator that will work for a long time. But "long time" isn't the same as forever. I'm just happy that they're available as replacements. :)

Scritto da: Stan

Air compresser air regulator

Regulator arrived as advertised. It came with ample instructions and once installed it was very responsive and worked as designed. Seems to be a quality product and is currently installed on a craftsman 30 gallon air compressor. Most satisfied with purchase.

Scritto da: Thomas Lucenti

Critically failed after 9 months of moderate use.

As another reviewer stated; The regulator failed after 9 months of use. The pressure would climb on it's own and when the knob was turned to reduce the pressure, the regulator would then vent air out from under the knob, non-stop, causing the compressor to constantly run. We empty all the air from our compressor nightly and generally work at 90psi. Pretty gentle use to experience a failure so quickly.

Scritto da: FRED von AMERONGEN

Five Stars

HAD NO IDEA I COULD GET THIS FROM AMAZON....WAS A BIG HELP