CURT 45408 piekabes sakabes uztvērēja adaptera reduktora uzmavu komplekts, no 3 līdz 2-1/2 vai 2 collām, 2-daļ.

Name: CURT 45408 piekabes sakabes uztvērēja adaptera reduktora uzmavu komplekts, no 3 līdz 2-1/2 vai 2 collām, 2-daļ.
Brand: CURT
SKU: 0612314454082
Price: 100.95 EUR
Availability: InStock

Brand:CURT

3.7/5

€
100.95

CURT reduktora uzmavu komplektā ietilpst divas reduktora uzmavas, kas pielāgo 3 uztvērēja caurules atveri, lai tā atbilstu 2-1/2 vai 2 kātam. Adaptera uzmavas ir viegli uzstādāmas un ir saderīgas ar praktiski jebkuru 3 sakabi. Mazāko uzmavu var izmantot arī 2-1/2 uztvērēja caurules atverē, pielāgojot to 2 kātam. Šī komplekta piekabes bruto masas ietilpība un mēles svara ietilpība ir ierobežota līdz sakabes jaudai. Lai pabeigtu šo reduktora uzmavu komplektu, tas ir aprīkots ar īpaši izturīgu karbīda melnu pulvera pārklājumu, kas nodrošina izcilu rūsas, skaidu un UV izturību.

Summa

Pievienot grozam Pērc tagad

EAN: 0612314454082

Kategorijas Automobiļu nozare, Interjera piederumi, Tilpnes un vinčas, Kravas bagāžnieku āķi, Uzņemšanas ierīces,

VIEGLI UZSTĀDĪT. Šī piekabes sakabes reduktora uzmavu komplekta uzstādīšana ir ātra un vienkārša. Jūs varat izmantot katru komplektā iekļauto reduktora uzmavu pēc vajadzības, vienkārši ievietojot tās savā uztvērējā (uzkabes tapa tiek pārdota atsevišķi). KOROZIJAS IZTURĪGS. Šis piekabes sakabes reduktora uzmavu komplekts ir pārklāts ar īpaši izturīgu melnu pulvera pārklājumu, kas iztur lietus, netīrumus, UV bojājumus un citus korozīvus draudus. CIETU SPĒKU. Šis sakabes uztvērēja reduktora adaptera komplekts ir izgatavots no augstas stiprības tērauda, lai nodrošinātu drošu vilkšanu priekšā esošajam ceļam. Tās piekabes bruto svara rādītāji un mēles svara rādītāji ir ierobežoti līdz piekabes sakabes celtspējai. STANDARTA FIT. Šī piekabes sakabes uztvērēja adaptera komplekta izmēri ir 3 x 3 collas, lai tas būtu piemērots jebkuram nozares standarta 3 collu piekabes uztvērēja uztvērējam. Tas arī pieņem jebkuru nozares standarta 2-1/2 collu vai 2 collu kātu. DAUDZUMS ADAPTERS. Šis piekabes sakabes adaptera uzmavu komplekts ir viegli ievietojams jūsu piekabes sakabes uztvērējā, kad vien nepieciešams, lai pielāgotu to no viena izmēra uz citu. Šis sakabes adapteris ir piemērots 3 collu uztvērējam un 2-1/2 collu kātam. Pielāgošanas veids: universāls.

Brand	CURT
Brand	‎CURT
Country of Origin	‎China
Customer Reviews	4.7 4.7 out of 5 stars 1,589 ratings 4.7 out of 5 stars
Exterior	‎CARBIDE BLACK POWDER COAT
Finish Type	Powder Coated
Item model number	‎45408
Item Weight	‎6.95 pounds
Manufacturer	‎CURT
Manufacturer Part Number	‎45408
Material	Carbon Steel
Model	‎Reducer Sleeve Set
OEM Part Number	‎45408
Product Dimensions	‎7 x 3 x 3 inches
Vehicle Service Type	Trailer

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: John Michael Myers

Stout and solid

I bought them to reinforce the 2 inch mounts for my tractor counterweight. The 700 pound cylinder was bowing the 2 inchers.

Scritto da: Jerry Nagel

Best adapter available for 2, 2.5 or 3”

This slips in the 3 inch converts it to 2 1/2 or 2 inch to fit the old stuff well worth the money

Scritto da: johns1959

Curt Receiver Adapter User Review

I recently bought a new F350 to tow an RV when I retire. The new truck came with a 3" receiver. I have a utility trailer and hitch hardware for a 2" receiver so I did some research and selected the Curt Receiver Adapter in order to continue using my 2" hardware. The new adapter will step my 3" receiver down to a 2.5" shank receiver hitch or a 2" shank receiver hitch. The product arrived quickly and was well packaged. It is well designed and has a lip built into each adapter which serves to align the hole for the hitch pin perfectly (this was a frequent complaint in user reviews of other products). I did notice that there is quite a bit of play in the assembly so I expect that there will be some chucking and noise once I have the utility trailer hooked up and towing. I will post an update after towing with this set-up a few times. Update 8/29/2021: I did use the adapter to tow my utility trailer about 800 miles. My utility trailer uses a 2" ball and a 2" receiver shank so I had all three pieces of the adapter assembly installed. The trailer was loaded with a large offset smoker secured in the front of the box (forward of the axle). I did notice some chucking and noise from the receiver adapter but it was not as bad as I feared. Otherwise the adapter performed flawlessly.

Scritto da: scott

Just as described.

good quality well made.

Scritto da: Amazon Customer

2020-2022 Ford F350

If you own a newer Ford F-350 you need this to transfer sleeve from class 5 to class 3 for the normal rv travel trailer. Product is excellent and allows for quick line up with hitch pin. Use the one supplied from Ford for width.

Scritto da: Steve

F 350 Super Duty Approved

Fit was perfect I needed it to reduce my 3 inch class 5 hitch on my F 350 Super Duty to a 2 inch receiver. Heavy Duty and well worth the money

Scritto da: Eric C Parshall

Perfect for me

Got a new truck with a bigger receiver. This allowed me to use my old hitch. Also comes with smaller adapter if I use a smaller hitch

Scritto da: Sue Wilhelm

Just what we needed

The adapter was exactly what we needed to transition from the truck to the Reese hitch system we already had.

Scritto da: Amazon Customer

fait pour 2 size good

très bien

Scritto da: Mike

Great value

Great receiver reducer for the price, using it on a 17 F350 with a 3 inch hitch. For the price it's hard to beat and it's nice that it gives a couple size options. Only down side I can see is it does move around a bit so if you hate hearing your hitch rattle a bit don't buy this and get a proper 3" hitch.

Scritto da: Howie

Great open box deal

Open box deal. Good as new and half the price. It's a big beefy chunk of steel from a major brand. Not too much can go wrong, so it was worth taking a chance on the open box deal.

Scritto da: Jerry Anderson

Fits perfect on 2020 FORD F350

Tabs on inner sleeve make for perfect alignment of holes for pin.

Scritto da: Fil

Adapter works great.

The hitch adapter works great on the 2017 ford 350 super duty dually. Great tool for quickly switching from massive dually hitch down to a 2in.