CURT 55326 transportlīdzekļa pusē pielāgota 4 kontaktu piekabes vadu instalācija, der atsevišķiem Ford Crown Victoria, Ford Mustang, Mercury Grand Marquis, melna

Brand:CURT

3.3/5

68.63

Ja jūsu automašīna nav aprīkota ar vadiem piekabes vilkšanai, CURT pielāgota elektroinstalācija ir ideāls risinājums. Pielāgota vadu instalācija — saukta arī par T savienotāju — ir vienkārša, plug and play elektriska ierīce, kas tiek pievienota jūsu automašīnas elektrosistēmai un nodrošina standarta, universālu piekabes vadu savienojumu. Tas tiek darīts, izmantojot divus vai vairākus transportlīdzeklim raksturīgus, ar OEM saderīgus savienotājus, lai pievienotu aizmugurējo lukturu komplektam, novēršot nepieciešamību pēc griešanas, savienošanas un lodēšanas uzstādīšanas laikā. Pielāgotas vadu instalācijas ir pielāgotas transportlīdzekļiem, un, lai gan tās nav pieejamas visiem transportlīdzekļiem, tās piedāvā vienu no ātrākajiem, vienkāršākajiem un drošākajiem veidiem, kā savienot transportlīdzekli vilkšanai. Šajā konkrētajā spraudņa instalācijā ir četrvirzienu plakana savienotāja ligzda, un tā ir izstrādāta kā pielāgota vadu instalācija, lai tā atbilstu noteiktiem Ford Crown Victoria, Ford Mustang un Mercury Grand Marquis gadiem (lai pārbaudītu sava transportlīdzekļa saderību, skatiet informāciju par lietojumprogrammu). . Tam ir visi nepieciešamie vadu komponenti, lai izveidotu uzticamu piekabes vadu savienojumu, kā arī putekļu vāks, lai savienotājs būtu tīrs, kad to neizmanto. Jums ir prātā priekšstats par savu nākamo galamērķi — varbūt tā ir laiva, kas nolaižas jūsu iecienītākajā makšķerēšanas vietā, varbūt tas ir kempings, no kura paveras skats uz kādu no dabas šedevriem, vai varbūt tā ir nākamā lielā darba vieta. Tomēr šī attēla pārvēršana realitātē prasa vairāk nekā tikai sapņošanu. Tas prasa stabilu savienojumu un pareizo enerģijas daudzumu. CURT pielāgota elektroinstalācija ir izgatavota, izmantojot dažas no vismodernākajām tehnoloģijām nozarē, un ir paredzētas vieglai uzstādīšanai, nodrošinot ilgstošu elektrisko savienojumu jūsu sakabes āķa uzstādīšanai.

PUTEKĻU KĀRTA. Lai veicinātu ilgstošu lietošanu un izturību pret laikapstākļiem, šai 4-polu piekabes apgaismojuma vadu instalācijai ir gumijas putekļu pārsegs. Kad tas netiek lietots, tas viegli pieguļ četrvirzienu plakanajam savienotājam, aizsargājot to pret āra elementiem. VIEGLA SATRAUKŠANA. Pateicoties šīs transportlīdzekļa ligzdas ergonomiskajam dizainam, piekabes vadu un piekabes lukturu pievienošana ir vienkārša. Tam ir izciļņi augšpusē un apakšā, lai nodrošinātu labāku satvērienu, pievienojot piekabei vai atvienojot to. TRANSPORTLĪDZEKĻIEM. Šī pēcpārdošanas transportlīdzekļu piekabju vadu instalācija ir paredzēta atsevišķiem Ford Crown Victoria, Ford Mustang un Mercury Grand Marquis gadiem. STANDARTA SAVIENOTĀJS. Šo iespraudamo 4 plakanu piekabes vadu var izmantot, lai savienotu piekabes aizmugurējos lukturus, bremžu signālugunis un pagrieziena rādītājus. Četrvirzienu piekabes gaismas vadi ir populāri dažādās piekabēs, pievienojot daudzpusīgas vilkšanas iespējas jūsu transportlīdzeklim. VIEGLI UZSTĀDĪT. Nekādas griešanas! Nav savienojuma! Šis piekabes vadu komplekts tiek pievienots esošajiem jūsu transportlīdzekļa rūpnīcas vadiem un aprīkots ar standarta aizmugurējo 4 kontaktu piekabes vadu savienotāju piekabes pievienošanai un vilkšanai.
Brand CURT
Brand ‎CURT
Country of Origin ‎USA
Customer Reviews 4.2 4.2 out of 5 stars 44 ratings 4.2 out of 5 stars
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 9 x 4 x 2 inches
Item model number ‎55326
Item Weight 0.49 Pounds
Item Weight ‎7.8 ounces
Manufacturer ‎Curt Manufacturing
Manufacturer Part Number ‎55326
Material Rubber
Model ‎Custom Wiring
OEM Part Number ‎55326
Product Dimensions ‎9 x 4 x 2 inches

3.3

9 Review
5 Star
60
4 Star
20
3 Star
10
2 Star
0
1 Star
10

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: Romy
Easy to install, but the finished install is jank
Super easy to install, instructions are included but you basically just piggyback this into your rear lights. I think it took like 10 minutes on my 97 Crown Vic. It helps to have some sort of trim removal tool to pop off the plastic clips Ford used to hold the trunk trim up with. It works fine, didn't have to rewire it like some other folks said. Biggest issue I have (which is why it's 4 stars) is that it stays in your trunk until you need it. Like, loose in the trunk. The instructions say something with the gist of 'just sort of tuck it up out of the way someplace.' When you want to use it, you pull it out of the trunk, hook it up to the trailer, and just kind of close the trunk lid on the wires. It's not like the fit and finish on a mid-90s Ford makes this problematic (the wires don't get pinched at all), but it's just jank. They could have routed it through a body plug or something similar (albeit the wires are too short to go through any of the stock body plugs). I'll eventually properly mount this outside the car, but it's going to be a PITA since the connectors will have to be depinned, a hole will need to be drilled, and I'll need to route it all through a grommet that fits said hole. Totally doable, but it's going to take more than 10 minutes.
Scritto da: WEH
Works great!
Fits perfect on my 1995 mustang.
Scritto da: John T. Ertz
Easy to plug in, but was wired wrong.
Very simple to install as stated in the instructions, but as soon as I tested my lights my left signal started flashing fast as though a bulb was burned out, but it was also flashing the side marker light. Disconnected harness and all returned to normal. Broke out test lamp and found that the harness wires from this unit had been improperly placed. In the female connector that plugs to the vehicle wire harness, the Yellow (signal) wire is in the top right, with the Brown (marker lamp) wire in the bottom right. However on the male plug that goes to the taillight and sidemarker, the Yellow and Brown wires are reversed so that the Stop/Turn wire is trying to feed the side marker and the Brown side marker wire is trying to feed the Stop and Turn function. Might want to check that quality control at your Mexican plant and make sure the assembler isn't color blind...
Scritto da: IntoxicatedRedneck
Works
Arrived this evening, I was nervous to open anything from the mail at this point. However, I needed to go pick up my S-10, so I opened it up and found out the harness was real easy to install. I put this in my 96 Mercury Grand Marquis, it basically just snaps into the back of the tail light plugs on the both sides. Takes a minute, hooked up my car trailer, everything worked like it should. Picked up my truck, came back home, everything still works. Its a gud buy.
Scritto da: Yooper-in-gb
Curt 55326 wire harness
This device does not fit a 2004 Mercury Grand Marquis LS as stated on the Amazon parts selector. It only works up to 1997. Curt harness #58044 is for later models and must be spliced in. This(55326) harness just plugs in and looks like a great way to put on a trailer plug. I am sure it works great on the correct model cars. Note for Curt Mfg. - Amazon does NOT download directly from Curt what parts fit each model, so check the Curt site first for compatibility.
Scritto da: joshua
Nice
Work perfectly for mustang 94 convertible V6
Scritto da: Louis c.Brown jr.
Four Stars
thank u
Scritto da: David Plowman
Five Stars
I have not used it yet but think it well work
Scritto da: Amazon Customer
Great price
Quick and easy install

Saistītie produkti

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array