CURT 55513 transportlīdzekļa pusē pielāgota 4 kontaktu piekabes vadu siksna, Select Toyota Tacoma, T100, Hilux, melna

Name: CURT 55513 transportlīdzekļa pusē pielāgota 4 kontaktu piekabes vadu siksna, Select Toyota Tacoma, T100, Hilux, melna
Brand: CURT
SKU: 612314555130
Price: 90.83 EUR
Availability: InStock

Brand:CURT

3.8/5

€
90.83

Ja jūsu automašīna nav aprīkota ar vadiem piekabes vilkšanai, CURT pielāgota elektroinstalācija ir ideāls risinājums. Pielāgota vadu instalācija — saukta arī par T savienotāju — ir vienkārša, plug and play elektriska ierīce, kas tiek pievienota jūsu automašīnas elektrosistēmai un nodrošina standarta, universālu piekabes vadu savienojumu. Tas tiek darīts, izmantojot divus vai vairākus transportlīdzeklim raksturīgus, ar OEM saderīgus savienotājus, lai pievienotu aizmugurējo lukturu komplektam, novēršot nepieciešamību pēc griešanas, savienošanas un lodēšanas uzstādīšanas laikā. Pielāgotas vadu instalācijas ir pielāgotas transportlīdzekļiem, un, lai gan tās nav pieejamas visiem transportlīdzekļiem, tās piedāvā vienu no ātrākajiem, vienkāršākajiem un drošākajiem veidiem, kā savienot transportlīdzekli vilkšanai. Šajā konkrētajā spraudsavienojuma instalācijā ir četrvirzienu plakana savienotāja ligzda, un tā ir izstrādāta kā pielāgota vadu instalācija, kas piemērota noteiktu gadu Toyota Tacoma, T100 un Hilux (lai pārbaudītu sava transportlīdzekļa saderību, skatiet informāciju par lietojumprogrammu). Tam ir visi nepieciešamie vadu komponenti, lai izveidotu uzticamu piekabes vadu savienojumu, kā arī putekļu vāks, lai savienotājs būtu tīrs, kad to neizmanto. Jums ir prātā priekšstats par savu nākamo galamērķi — varbūt tā ir laiva, kas nolaižas jūsu iecienītākajā makšķerēšanas vietā, varbūt tas ir kempings, no kura paveras skats uz kādu no dabas šedevriem, vai varbūt tā ir nākamā lielā darba vieta. Tomēr šī attēla pārvēršana realitātē prasa vairāk nekā tikai sapņošanu. Tas prasa stabilu savienojumu un pareizo enerģijas daudzumu. CURT pielāgota elektroinstalācija ir izgatavota, izmantojot dažas no vismodernākajām tehnoloģijām nozarē, un ir paredzētas vieglai uzstādīšanai, nodrošinot ilgstošu elektrisko savienojumu jūsu sakabes āķa uzstādīšanai.

Nav pieejama neviena vienība

EAN: 612314555130

Kategorijas Automobiļu nozare, Interjera piederumi, Tilpnes un vinčas, Kravas bagāžnieku stiprinājumi Aksesuāri, Kārtu elektroinstalācija,

PUTEKĻU KĀRTA. Lai veicinātu ilgstošu lietošanu un izturību pret laikapstākļiem, šai 4-polu piekabes apgaismojuma vadu instalācijai ir gumijas putekļu pārsegs. Kad tas netiek lietots, tas viegli pieguļ četrvirzienu plakanajam savienotājam, aizsargājot to pret āra elementiem. UZTICAMA JAUDA. Šī četrvirzienu piekabes vadu instalācija ir veidota, izmantojot virsmas montāžas tehnoloģiju. Šāda veida shēmas rada mazāk siltuma, optimālu gaismas intensitāti un izturīgu veiktspēju. TRANSPORTLĪDZEKĻIEM. Šī pēcpārdošanas transportlīdzekļa piekabes vadu instalācija ir paredzēta dažiem Toyota Tacoma, T100 un Hilux gadiem. STANDARTA SAVIENOTĀJS. Šo iespraudamo 4 plakanu piekabes vadu var izmantot, lai savienotu piekabes aizmugurējos lukturus, bremžu signālugunis un pagrieziena rādītājus. Četrvirzienu piekabes gaismas vadi ir populāri dažādās piekabēs, pievienojot daudzpusīgas vilkšanas iespējas jūsu transportlīdzeklim. VIEGLI UZSTĀDĪT. Nekādas griešanas! Nav savienojuma! Šis piekabes vadu komplekts tiek pievienots esošajiem jūsu transportlīdzekļa rūpnīcas vadiem un aprīkots ar standarta aizmugurējo 4 kontaktu piekabes vadu savienotāju piekabes pievienošanai un vilkšanai.

Brand	CURT
Brand	‎CURT
Customer Reviews	4.7 4.7 out of 5 stars 1,008 ratings 4.7 out of 5 stars
Exterior	‎Machined
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	9 x 4 x 3 inches
Item model number	‎55513
Item Weight	0.91 Pounds
Item Weight	‎14.6 ounces
Manufacturer	‎CURT
Manufacturer Part Number	‎55513
Material	Rubber
Model	‎Custom Wiring
OEM Part Number	‎55513
Product Dimensions	‎9 x 4 x 3 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: MH

Easy install, good value

I’m not a mechanic, and this was still easy to install. Took no more than 30-45 minutes going slowly and methodically. Fits the Toyota Tacoma 2005-2015 perfectly and has worked well for me. Would recommend if you don’t want to splice wires.

Scritto da: Capt Jay

Easy Install

I would go for 5 stars, BUT the double sided patch they provided was all dried out and worthless. Ugh.. I had to jump through hoops to secure the module inside the twilight box.

Scritto da: Mustafa Al azzawi

Quality

It is really easy to install and very good for the value but the quality of the wiring not that good but overall I haven’t had an issue with it works well

Scritto da: Ian from the north

Easy install

Perfect fit 2014 Tacoma. Super easy to install and works great.

Scritto da: Jeffy T

Doesn’t get much easier than this!

Clean off some paint, drive a self tapper in for ground, zip tie the slack, plug and play from there! I HATE cutting factory wiring, this was the answer!

Scritto da: Atmosfera

OEM quality

I loved how easy to install this harness was. It is now installed into a Mexican Toyota Hilux 2017. Every connector fits without a problem. The instructions on how to replace it are great. My recommendation is for you to get a tester to keep in the truck for future usage. It only adds a couple of dollars to the setup. Great product!!

Scritto da: DownTown

Install was a breeze

Watched YouTube video on the install and it was very easy. 20 min and I was done.

Scritto da: Tranche

Perfect!

Installed on a 2014 Tacoma after waiting approx. 1 month for Curt to confirm (in their application chart) that the T-Connector for the 2013 Tacoma also fits the 2014. It does! And the quality of this harness is first rate, including the connectors which appear to be identical to the Toyota OEM. Just a few suggestions to improve the installation experience: First, there's really no need to drill a hole to attach the ring terminal ground. Inside the left tail-light housing, there are 3-4 machine screws (ends) attaching the metal housing to the truck body. You need only use one to attach the ring terminal; I used the upper right with a nut and lock washer I supplied. I tested this ground location with a meter and found that it's solid. No drilling. A second suggestion would be to add wire conduit to all three branches of the T. While not required, I believe this upgrade improves the integrity (and certainly the protection) of the wiring and conforms with the OEM wiring in the vicinity of the T-Connector. If you do install conduit, do this BEFORE you plug in and route your wiring. Much easier this way. You'll need approx. 10 ft. of 3/8" or 1/2" split seam conduit; I used Dorman #86651 @ $6 (approx.). Seal conduit ends with electrical tape. Finally, as this T-Connector supplies a flat-4 connector to the trailer, I suggest that you include the Curt 58001 bracket to attach this connector to your receiver tube. It's inexpensive and fits perfectly. 7/28/14 Edit. While I certainly maintain my 5-star rating of this T-Connector, I've found that, over time (6 mos.), one minor flaw presents. The double-sided adhesive strip that's intended to hold the converter box in place loses its adhesive holding power. No worries; the fix is easy: Just replace with similar sized "industrial strength" Velcro. (I recommend 3M Dual-Lok. Very strong and inexpensive.) Cover the entire back of the box with the Velcro and attach to a (preferably) smooth and clean vertical sheet metal surface. (I had no trouble finding this.) If I were on the Product Development Team at Curt, I'd recommend a redesign of the box to include two (2) mounting ears through which sheet metal screws could be used to attach the box -- again, to a non-structural non-frame vertical surface.

Scritto da: canuk54

Fit perfectly on a 2010 Tacoma

This replaced one installed incorrectly by a nearby Truck and Van shop. It was very easy to install, less than twenty minutes from start to finish and works great. It has been installed for 5 months through rain etc with no issues. The last one was installed with the box below the truck bed, making it open to the elements and it didn't last through a Canadian winter before shorting out the brake lights and causing me to not be able to put my truck into gear. After being towed to a garage and having the cause pinpointed to the incorrectly installed trailer wiring, which was removed, all was good. This unit was recommended to me by the repair garage.

Scritto da: R. B. Clarke

Liike original equipment

Name brand and really good instructions Took about 20 minutes and looks like an OEM product which I think it is Solid construction, and only had to drill one small hole for the ground wire , screw incldued Worked like a charm

Scritto da: Amazon Customer

Works perfect.

Super easy to install. Works perfect for my trailer

Scritto da: Chris B

Easy to install

Easy to install, put on a Tacoma that’s always pulling boats out of the water. Holds up no problem

Scritto da: Jarett Miles

easy to install

Quality product, easy to install.