CURT 56365 transportlīdzekļa pusē pielāgota 4-pin piekabes vadu instalācija, der Select Honda Pilot, Ridgeline

Name: CURT 56365 transportlīdzekļa pusē pielāgota 4-pin piekabes vadu instalācija, der Select Honda Pilot, Ridgeline
Brand: CURT
SKU: 0612314563654
Price: 105.42 EUR
Availability: InStock

Brand:CURT

3.3/5

€
105.42

CURT pielāgotie vadu savienotāji ir vienkāršākais veids, kā aprīkot savu transportlīdzekli ar CURT piekabes vadu savienojumu. Tie ir izgatavoti, izmantojot dažas no vismodernākajām tehnoloģijām nozarē, un katrs no tiem ir pielāgots darbam ar noteiktu marku un modeli. Daži automobiļu ražotāji transportlīdzeklī uzstāda īpašu kontaktligzdu, ko izmanto transportlīdzekļa un piekabes vadiem. Lai gan šī īpašā kontaktligzda nav aprīkota katram transportlīdzeklim, CURT pielāgotais vadu savienotājs, ko sauc arī par T veida savienotāju, izmanto ligzdu vienkāršai, bez stresa uzstādīšanai. Tā vietā, lai jūs grieztu, salabotu un lodētu transportlīdzekļa vadu sistēmā, pielāgotais vadu savienotājs izmanto vienu ar OEM saderīgu spraudni un uzreiz nodrošina standarta, universālu transportlīdzekļa un piekabes vadu savienojumu, parasti četrvirzienu veidā. plakans. Visi CURT pielāgotie vadu savienotāji ir izgatavoti atbilstoši transportlīdzeklim, lai nodrošinātu pēc iespējas vienkāršāku uzstādīšanu un vislabāko piemērotību. Šis konkrētais spraudsavienotājs nodrošina četrvirzienu plakanu ligzdu un ir paredzēts kā pielāgota vadu opcija noteiktiem Honda Pilot un Ridgeline gadiem (nepieciešama rūpnīcas vilkšanas pakotne; lai pārbaudītu sava transportlīdzekļa saderību, skatiet informāciju par lietojumprogrammu). Tam ir visa nepieciešamā aparatūra, lai izveidotu stabilu savienojumu. Tam ir arī putekļu vāks, lai savienotāja ligzda būtu tīra, kad tā netiek lietota. Lai nodrošinātu ilgstošu uzticamību, visi CURT pielāgotie vadu savienotāji tiek rūpīgi pārbaudīti, lai nodrošinātu optimālu funkcionalitāti. Stress ir pēdējā lieta, kas jums jāizjūt, velkot piekabi — neatkarīgi no tā, vai velkat savu RV uz iecienītāko kempinga galamērķi, ar visurgājējiem līdz medību laukiem vai ar zvejas laivu uz jauno slēpto karsto punktu. Uzņēmums CURT uzskata, ka jūsu vilkšanas aprīkojumam ir jāpalielina jūsu pieredze, nevis jāsamazina.

Summa

Pievienot grozam Pērc tagad

EAN: 0612314563654

Kategorijas Automobiļu nozare, Interjera piederumi, Tilpnes un vinčas, Kravas bagāžnieku stiprinājumi Aksesuāri, Kārtu elektroinstalācija,

PUTEKĻU KĀRTA. Lai veicinātu ilgstošu lietošanu un izturību pret laikapstākļiem, šai 4-polu piekabes apgaismojuma vadu instalācijai ir gumijas putekļu pārsegs. Kad tas netiek lietots, tas viegli pieguļ četrvirzienu plakanajam savienotājam, aizsargājot to pret āra elementiem. UZTICAMA JAUDA. Šī četrvirzienu piekabes vadu instalācija ir veidota, izmantojot virsmas montāžas tehnoloģiju. Šāda veida shēmas rada mazāk siltuma, optimālu gaismas intensitāti un izturīgu veiktspēju. TRANSPORTLĪDZEKĻIEM. Šī pēcpārdošanas transportlīdzekļa piekabes vadu instalācija ir paredzēta atsevišķiem Honda Pilot un Ridgeline gadiem (nepieciešama rūpnīcas vilkšanas pakotne). STANDARTA SAVIENOTĀJS. Šo iespraudamo 4 plakanu piekabes vadu var izmantot, lai savienotu piekabes aizmugurējos lukturus, bremžu signālugunis un pagrieziena rādītājus. Četrvirzienu piekabes gaismas vadi ir populāri visdažādākajās piekabēs, pievienojot daudzpusīgas vilkšanas iespējas jūsu transportlīdzeklim. VIEGLI UZSTĀDĪT. Nekādas griešanas! Nav savienojuma! Šis piekabes vadu komplekts tiek pievienots esošajiem jūsu transportlīdzekļa rūpnīcas vadiem un aprīkots ar standarta aizmugurējo 4 kontaktu piekabes vadu savienotāju piekabes pievienošanai un vilkšanai.

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.2 4.2 out of 5 stars 87 ratings 4.2 out of 5 stars
Exterior	‎Smooth
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	9 x 6 x 3 inches
Item model number	‎56365
Item Weight	0.84 Pounds
Item Weight	‎13.4 ounces
Manufacturer	‎CURT
Manufacturer Part Number	‎56365
Material	Rubber
Model	‎Custom Wiring
OEM Part Number	‎56365
Product Dimensions	‎9 x 6 x 3 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: D

need update for Ridgeline missing fuses and directions incomplete

While the it appears to be a good value and is not that bad to install. Directions need to be updated for Ridgeline 1. Picture of where to plug the Custom harness into behind the rear seat. You have to reach way up there and just feel for it to pull it down to expose it. 2. While I have the breaks/turn/hazard lights working the tail/running lights will not come on. It also appears that not all fuses needed are included . It’s looking like I will need to get 2 more 20A fuses to fill out the entire fuse box. Picture of the fuse box has all fuses installed but the kit does not include all the fuses required. Picture shows a yellow 20A fuse in position 3 but directions say to use a 10A Also picture from mfg website on directions shows all fuses installed. Yellow = 20A Red = 10A Brown = 7.5A I have a 2019 Ridgline RTL 2 Wheel drive (FWD). See the included pictures of fuse boxes One from Website of mfg and one from my 2019 Ridgeline Now I am going to get some more fuses and see if that fixes it to make it look just like the picture of the installation manual. From mfg website. Which is in color Includes Printed directions are in black and white I found this on a forum, looks like there is a wire harness problem from honda perhaps where Running lights will not come on . ----------- My 2017 Ridgeline Touring AWD has the the 7 pin trailer plug. Without the vehicle running and no park or headlights on, there is dc power on one terminal only of the truck connector. When the vehicle is running, my utility trailer (factory made) lighting works fine except for park lights. Re, the trailer.... brake lights, turn signals all work fine in conjunction with what the Vehicle is doing except: the park lights as well as license plate light do not energize when the vehicle's park or head lights are on. What I have done temporarily (until I figure it out) is connect that one dc supply on the factory installed 7 pin trailer connector, to the side marker lights and license plate to make them work. Ergo, the side lights of the trailer energize whenever I start the vehicle and connect the trailer harness, but only because I've connect those trailer side lights wire to that one constant dc power source in that connector. I'm not a newbie to electronics, dc lighting or mechanical. Being doing it for 40 years. Any body else notice this issue? Thanks John Interesting John. I just got to the bottom of my problem, which sounds like yours. (2017 Ridgeline RTS). My neighbor completely re-wired the livestock trailer and when we tested it yesterday, everything worked except the running lights (the lights that are on when the lights are on in the truck). We diagnosed the problem to be in the plug, since when we plugged the same wiring harness (7 to 4 also) into a different truck, all lights worked. My mechanic spent more than an hour this morning and finally fixed the problem. Two wires in the Honda plug (where I plug in my 7 to 4 wiring harness to the trailer), were apparently switched at the factory. He called Honda to get a new plug and was told that they are back-ordered. To fix the problem, he switched the 2 wires himself and now all the lights work, including the running lights (you could call them the tail lights, also). My guess is that my plug came defective from the factory in Alabama. Is that your guess also? My question is was there a recall on this problem? Was it all 2017 models? Thanks, Lee in Iowa

Scritto da: Brandon loco

Are your running lights not working on your Honda Ridgeline with the Curt wire harness?

Everything was pretty simple with the kit except the instructions are a little bit off. I have a 2017 Honda Ridgeline front wheel drive vehicle. I installed per the instructions and my running lights on the trailer wouldn't work. These are the changes that should happen IMO. 1.) It says to route the 4 way connector to the trunk but no way is that possible on this vehicle. With the black wire protector it fits great kinda pinched between the plastic on the bottom near the hitch, that way it can easily slip out or stay up when not in use. 2.) VERY IMPORTANT!!! The instructions say use fuse 3 and 6, the diagram has an arrow pointing to fuse 7 (WHY???). I had to use fuse 6 and the fuse that went into 3, I placed in spot 9 and that got my running lights working. I'm not sure what fuse 3 is for but in my circumstance it wasn't needed.

Scritto da: Amy

Very easy to install

The instructions were perfect and easy to follow. The lights worked great without any issues. I installed them on a 2009 Honda Pilot.

Scritto da: Jason

Easy trailer wiring kit

Directions are accurate and install took 20 minutes. Harness worked perfectly. Only gripe if at all is the lack of mounting bracket for the flat 4 plug. I would have paid more if it was included

Scritto da: Aisa

It did not work on my 2010 pilot

Installed it as directed, but it did not work. I then returned it and bought the tow ready T-one 118491 and it works.

Scritto da: Kenneth Laird

The product was eventually made to work, but information ...

The product was eventually made to work, but information I found in another user's review proved to be crucial in getting it to. I think the manufacturer should have known that for the product to work, fuses had to be already in place in certain locations in the engine bay fuse box. This is a very specific use case product, 2017 Honda Ridgelines and earlier model Pilots. Updates and notifications should have been all over their website about this since getting printed instructions updated is not feasible.

Scritto da: GK

Great Product, does what it needs...

Worked Great for 2010 Honda Pilot. Instructions and all was good. Product works as expected. thanks

Scritto da: Amazon Customer

2011 Honda pilot

Works great with my honda pilot. Easy to install with just a few tools.