CURT 56377 transportlīdzekļa pusē pielāgota 4 kontaktu piekabes vadu instalācija, Select Mazda CX-5, melna

Name: CURT 56377 transportlīdzekļa pusē pielāgota 4 kontaktu piekabes vadu instalācija, Select Mazda CX-5, melna
Brand: CURT
SKU: 0612314563777
Price: 107.72 EUR
Availability: InStock

Brand:CURT

3.6/5

€
107.72

Ja jūsu automašīna nav aprīkota ar vadiem piekabes vilkšanai, CURT pielāgota elektroinstalācija ir ideāls risinājums. Pielāgota vadu instalācija — saukta arī par T savienotāju — ir vienkārša, plug and play elektriska ierīce, kas tiek pievienota jūsu automašīnas elektrosistēmai un nodrošina standarta, universālu piekabes vadu savienojumu. Tas tiek darīts, izmantojot divus vai vairākus transportlīdzeklim raksturīgus, ar OEM saderīgus savienotājus, lai pievienotu aizmugurējo lukturu komplektam, novēršot nepieciešamību pēc griešanas, savienošanas un lodēšanas uzstādīšanas laikā. Pielāgotas vadu instalācijas ir pielāgotas transportlīdzekļiem, un, lai gan tās nav pieejamas visiem transportlīdzekļiem, tās piedāvā vienu no ātrākajiem, vienkāršākajiem un drošākajiem veidiem, kā savienot transportlīdzekli vilkšanai. Šajā konkrētajā spraudņa instalācijā ir četrvirzienu plakana savienotāja ligzda, un tā ir izstrādāta kā pielāgota vadu instalācija, kas piemērota noteiktiem Mazda CX5 gadiem (lai pārbaudītu sava transportlīdzekļa saderību, skatiet informāciju par lietojumprogrammu). Tam ir visi nepieciešamie vadu komponenti, lai izveidotu uzticamu piekabes vadu savienojumu, kā arī putekļu vāks, lai savienotājs būtu tīrs, kad to neizmanto. Jums ir prātā priekšstats par savu nākamo galamērķi — varbūt tā ir laiva, kas nolaižas jūsu iecienītākajā makšķerēšanas vietā, varbūt tas ir kempings, no kura paveras skats uz kādu no dabas šedevriem, vai varbūt tā ir nākamā lielā darba vieta. Tomēr šī attēla pārvēršana realitātē prasa vairāk nekā tikai sapņošanu. Tas prasa stabilu savienojumu un pareizo enerģijas daudzumu. CURT pielāgota elektroinstalācija ir izgatavota, izmantojot dažas no vismodernākajām tehnoloģijām nozarē, un ir paredzētas vieglai uzstādīšanai, nodrošinot ilgstošu elektrisko savienojumu jūsu sakabes āķa uzstādīšanai.

Summa

Pievienot grozam Pērc tagad

EAN: 0612314563777

Kategorijas Automobiļu nozare, Interjera piederumi, Tilpnes un vinčas, Kravas bagāžnieku stiprinājumi Aksesuāri, Kārtu elektroinstalācija,

PUTEKĻU KĀRTA. Lai veicinātu ilgstošu lietošanu un izturību pret laikapstākļiem, šai 4-polu piekabes apgaismojuma vadu instalācijai ir gumijas putekļu pārsegs. Kad tas netiek lietots, tas viegli pieguļ četrvirzienu plakanajam savienotājam, aizsargājot to pret āra elementiem. UZTICAMA JAUDA. Šī četrvirzienu piekabes vadu instalācija ir veidota, izmantojot virsmas montāžas tehnoloģiju. Šāda veida shēmas rada mazāk siltuma, optimālu gaismas intensitāti un izturīgu veiktspēju. TRANSPORTLĪDZEKĻIEM. Šī pēcpārdošanas transportlīdzekļa piekabes vadu instalācija ir paredzēta atsevišķiem Mazda CX 5 gadiem. STANDARTA SAVIENOTĀJS. Šo iespraudamo 4 plakanu piekabes vadu var izmantot, lai savienotu piekabes aizmugurējos lukturus, bremžu signālugunis un pagrieziena rādītājus. Četrvirzienu piekabes gaismas vadi ir populāri dažādās piekabēs, pievienojot daudzpusīgas vilkšanas iespējas jūsu transportlīdzeklim. VIEGLI UZSTĀDĪT. Nekādas griešanas! Nav savienojuma! Šis piekabes vadu komplekts tiek pievienots esošajiem jūsu transportlīdzekļa rūpnīcas vadiem un aprīkots ar standarta aizmugurējo 4 kontaktu piekabes vadu savienotāju piekabes pievienošanai un vilkšanai.

Brand	CURT
Brand	‎CURT
Country of Origin	‎USA
Customer Reviews	4.6 4.6 out of 5 stars 224 ratings 4.6 out of 5 stars
Exterior	‎Smooth
Is Discontinued By Manufacturer	‎No
Item model number	‎56377
Item Weight	1.63 Pounds
Item Weight	‎1.63 pounds
Manufacturer	‎CURT
Manufacturer Part Number	‎56377
Material	Rubber
Model	‎Custom Wiring
OEM Part Number	‎56377

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Justin E

Low quality

The connector was crushed when I got it. This was the second time I've installed a curt trailer wiring harness for two different cars. Quality of materials seems lower than my first harness. Easy to install but a hassle without a lift for the cx5 because of all the paneling.

Scritto da: cheesis

wired, baby!

This is a decent kit with an isolator to keep vehicle's electrical system unaffected by wiring problems that originate with your trailer. The two sided tape affixed to the back of the isolator/ control unit was as dry and useless as tits on a mule, so you'll have most likely to figure another way to secure it to one of your interior panels. Also take note that when you secure your two thick wires together that one is 14 ga. and the other 12, and the butt connector provided, being a 10/12 might have to get a little extra crimping on the 14 side. Made in China

Scritto da: Al A.

Well made and my Mazda Dealership installed it and complimented me on this harness!

I had my Mazda dealer handle installation of this and a Curt 2" receiver on a new 2021 CX-5 Signature I just purchased. I'm familiar with Curt products as I've owned them before and every one was well made. The tech who installed this said it was a great choice and he said the installation went very easy and logically as well. The Tech and I discussed any shortcuts to the install and he emphasized not to take a shortcut and splice to the hot wire to the rear 12V cigarette receptacle as does Curt NOT want you to do this per the installation instructions. The hot wire should go to the battery location under the hood. My Utility Trailer uses all regular bulbs rather than low power LEDs and the Tech said it is safer and more reliable to hot wire to the battery due to the higher demand on that circuit branch. Given I might use that rear cirgarette lighter location for other accessories, that all makes sense. Maybe I'll convert my trailer to all LEDs at some point. Both the Service Advisor and the Tech warned me not to take any shortcuts and they wanted to adhere to Curt's Installation instructions for this harness, including the black hot wire that has to run to the front of the vehicle. It was, -By the Book, period!- There is plenty length for the harness connection and everything is stored in the rear wheel-well where the spare tire is located. No complaints and when a Mazda tech says a product is great and the install of it was the same, that's good enough for me! 5 Stars all around and no complaints at all.

Scritto da: Steve Gordon

Fits well all aspects , good product thanks

Mazda Installation difficult ! Harness great quality, needs wiring 12 in longer for trailer connect

Scritto da: aussiemama

Doubleback tape

The doubleback tape was useless, had no adhesion, past shelf life. Kit install pretty straight forward.

Scritto da: B. T.

Install by watching the video. There's one tricky part.

This adapter is well made and overall pretty easy to install. Of course running the power wire from the battery is a pain, but it can be done without a lift. I was able to squeeze under the car and zip tie the power wire to the existing support and then put the plate that protects that area back on. I used the Uhaul video and it walks you through the entire install in great detail. They use an upgraded battery cable but it's pretty self explanatory how to use the one that comes in this kit. I was able to install this in about an hour. I leave it inside the car under the trunk mat and just run it out and hook it up and then close the trunk over the wires when in use. You can also mount it outside the car, but then you'll need to worry about keeping the connection clean. As little as we use it I'd rather keep it out of the elements until needed. The trunk does not damage the wires when closed.

Scritto da: Amazon Customer

Easy to install for a total newbie with no special tools!

It took me a day (I have an infant so everything takes me much longer than it should) but it works and I figured all of it out myself!

Scritto da: Michael Maxwell

Easy install

Easy install, but I tapped positive into the power lead for the accessory socket in my cargo area. More than enough amps on that fuse in my car to handle the lights, and I installed the inline fuse as a backup. Didn't feel like running a power lead under the car and didn't need to. Works perfectly. Extra length sits in my spare tire area and I just close the hatch over the wire when not using it. I only use it a few times a year anyway so no sense running it through the floor.

Scritto da: Dohn

Very easy to install

Good product instructions

Scritto da: Barry C.

Works great on Mazda CX-5

Had it installed professionally, works as expected.

Scritto da: Amazon Customer

Easy to install works well

Works as advertised easy to install

Scritto da: Luma46

Works well on 2021 Mazda CX5

Good product, fits the vehicle, but not so easy to install. You have to partially remove some cover panels from trunk and run a + wire from battery, under the vehicle into the trunk.

Scritto da: Sanchit Datyal

Worked on mazda cx5 2019

Highly recommend it and took 2 hrs for installation