DARBĪBAS ATSLĒGS 114 gab. SAE/metriskā sprūdrata krānu un uzmavu komplekts — 82812 114 datoru komplekts

Name: DARBĪBAS ATSLĒGS 114 gab. SAE/metriskā sprūdrata krānu un uzmavu komplekts — 82812 114 datoru komplekts
Brand: GEARWRENCH
SKU: 787721817901
Price: 447.87 EUR
Availability: InStock

Brand:GEARWRENCH

3.8/5

€
447.87

PRODUKTA APRAKSTS Šis pilns SAE standarta un metrisko GEARWRENCH krānu un uzmavu komplekts ir lieliski piemērots meistaram mehāniķim vai mašīnu darbnīcai, kam ir dažādas vītņu vajadzības. 48 krāni un 48 matricas nodrošina jebkuru nepieciešamo izmēru, un mūsu instrumenti ir izstrādāti no paša sākuma, lai mūsu čakli strādājošajiem lietotājiem sniegtu GEARWRENCH jauninājumus, piemēram, mūsu T rokturu 5 sprūdrata galviņas vai patentēto Twist Lock vadotņu sistēmu, kas nostiprina jebkuru. pagarinājums vai griezējinstruments pie roktura, veidojot taisnus pavedienus katrā griezumā. AMAZON.COM Pilns sprūdrata T roktura sistēmas vītņgriezes un vītņu instrumentu komplekts (skatīt lielāku). 114-daļīgs GearWrench Tap and Die komplekts (modelis 82812) ir ideāli piemērots lietošanai šaurās, šaurās vietās un patentētā Twist Lock Guide System. samazina presformas vadotnes atkāpšanos un notur veidnes centrā, griežot vītnes. Sprūda T uzgriežņu atslēga nodrošina 5 grādu sprūdraušanas loku, un tās reversīvā svira ļauj ātri pārslēgties no uz priekšu uz atpakaļgaitā, lai novērstu griešanos ar roku. KAS IEKĻAUTS KASTĪBĀ82800 liela sprūdrata T atslēga, 82801 liela bloķēšanas krāna adapteris, 82802 liela sešstūra stangas adapteris, 3881 vidēja sprūdrata T uzgriežņu atslēga, 3883, vidēja pieskāriena adapteris, 3882 maza krāna adapteris, 3884 vidējais uzgriežņu adapteris, vīrišķais pagarinātājs8, 8280 3 pagarinātājs 8, 82803 pagarinājuma adapteris, bīdāms T adapteriem, 4 mm sešstūra atslēga, 5 skrūvju nosūcēji, metriskais vītnes mērītājs, SAE vītnes mērītājs, 48 tapi un 48 uzgriežņi PAR GEAR WRENCH Kopš oriģinālās patentētās 50 sprūdrata atslēgas izlaišanas GearWrench ir nepārtraukti vadījis sasniegumus caurlaides sprūdratu jomā. kontaktligzdas, skrūvgrieži/uzgriežņu skrūvgrieži, knaibles un speciālie instrumenti. Neatkarīgi no nozares, kurā atrodaties, GearWrench ir rīki, kas atbilst jūsu vajadzībām — no precīza līdz gandrīz neiznīcināmam. GearWrench rokas instrumentiem ir garantija uz mūžu, lai tiem nebūtu materiāla un apstrādes defektu.82812 114 GABALĪBU LIELS KRĀNS UN IZVĒRTĒJUMA KOMBINĀCIJAS APSKATS * Patentētā Twist Lock vadotnes sistēma samazina presformas vadotnes atkāpšanos * Automātiskās bloķēšanas funkcija ļauj droši noņemt krāna adapteri. * Atgriezeniskā svira novērš griešanos ar roku. * Oglekļa tērauda konstrukcija * Mūža garantija NO RAŽOTĀJA Zobstrāvas atslēga 114-daļ. liels sprūdraušanas krāns un diētiskais komplekts SAE/metriska, kas sastāv no: 82800 lielas sprūdravas T atslēgas, 82801 liela bloķēšanas krāna adapteris, liels 82802 sešstūra formas adapteris, 3881 vidēja sprūdrata T uzgriežņu atslēga, 3883, vidējas skrūves adapteris, 3882 mazā krāna adapteris, 3884 vidējas formas adapteris, 82803 vīrišķais pagarinātājs, 82804 sieviešu pagarinātājs, bīdāms T adapteriem, 4 mm sešstūra atslēga, 5 skrūvju nosūcēji, metriska vītnes mērītājs, SAE vītnes mērītājs, 48 tapi un 48 presformas. Pilns 48 krānu un 48 matricu komplekts, kā arī maza, vidēja un liela sprūdrata T rokturu sistēma, bloķējošie krāna adapteri un sešstūra formas adapteri. Krāni un presformas ir izgatavotas no augstas kvalitātes oglekļa instrumentu tērauda. Zobu uzgriežņu atslēgas ar sprūdratu – I rokturu sistēmas ir lieliski piemērotas meistaram mehāniķim vai mašīnu darbnīcai. Komplektā ir pūšams korpuss drošai un organizētai uzglabāšanai. Redzēt vairāk

Nav pieejama neviena vienība

EAN: 787721817901

Kategorijas instrumenti un mājokļa labiekārtošana, Elektroinstrumenti un rokas darbarīki, rokas darbarīki, vītņgrieži un urbji, Griežu un uzgriežņu komplektus,

Diska paplašinājuma adapteri nodrošina lielāku piekļuvi šaurās vietās, ja tos lieto kopā ar 3/8 collu diska paplašinājumiem. Automātiskās bloķēšanas funkcija ļauj droši noņemt krāna adapterus. Izpūšanas veidņu pārnēsāšanas soma ar noliektiem krāna turētājiem ērtai piekļuvei un uzglabāšanai Komplektā ietilpst 2 sprūdratināti T rokturi, 3 izmēru krāna adapteri un 2 izmēru adapteri, 2 pagarinājuma adapteri un bīdāms T. adapteriem, 4 mm sešstūra atslēga, 5 skrūvju nosūcēji, SAE un metriskie vītņu mērinstrumenti, kā arī 48 SAE un metrisko izmēru krāni un presformas no 4 40 līdz 3/4 collu un 3 mm līdz 18 mm. Die Adapteri darbojas ar 3/8 collu Drive caurlaides sprūdrata un ligzdu sistēmu, kā arī ligzdu piederumiem. Sprūdrata uzgriežņu atslēga darbojas ar GEARWRENCH caurlaides ligzdu sistēmu. Twist lock vadotnes sistēma samazina presformas vadotnes "atkāpšanos" un griešanas laikā notur presformas centrā. Spriegots T rokturis ar vēja stieņiem ar 5° pagrieziena loku un atpakaļgaitas sviru, lai novērstu griešanos ar roku.

Batteries Included?	‎No
Batteries Required?	‎No
Color	‎As Shown in the Picture
Country of Origin	‎Mexico
Customer Reviews	4.7 4.7 out of 5 stars 3,959 ratings 4.7 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish	‎Full Polish Chrome; taps & die are untreated
Included Components	‎
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎82812
Item Package Quantity	‎1
Item Weight	‎1.3 pounds
Manufacturer	‎GearWrench
Material	‎Steel
Measurement System	‎SAE & Metric
Part Number	‎82812
Power Source	‎Hand Powered
Product Dimensions	‎21 x 13 x 3 inches
Shape	‎Rectangular
Size	‎114 PC
Style	‎Set
Usage	‎Professional
Warranty Description	‎No Warranty - Consumable

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: OZ4

Works Great

Works as advertised!

Scritto da: nick radakovich

Value

Where I work taps are important an the quality is a must

Scritto da: Kenn

6 years and counting

Had these for six years and use them all the time as I restore a classic beetle to chase threads and other small projects. It’s a great set. The ratcheting handles are great, it’s all of great quality. Love this set.

Scritto da: Whilly whips

Worked great

Worked great as expected!

Scritto da: Tex

A great set with a lot to offer for this home-user.

I had read the reviews here before purchasing and especially took note of the people that reported some gouges in some of the machined taps with this set. I ordered anyway for a couple of reasons. First, this is no small company. It is part of Apex Tools that owns Lufkin Tapes, Crescent Tools, Wiss cutting tools, Nicholson Files and more etc that go back over 100 years. I have all of those tool Brands at home and they have served me exceptionally well for 30-40 years. So, I figured I'd give this set a go and if it was totally unacceptable, I could always return it (thanks to Amazon's service). Bottom-line, its not going back... I'm a home/hobbyist user of Tap and Dies, but I can understand why a Professional who uses these tools in a daily business setting can feel differently about what they need. But for my use at home, this is a great set, and for what you get, a very good price. I could not touch an equally configured Irwin/Hansen set for this price point. I have also used this set and it does a very acceptable job for my needs. Regarding the reports of the small gouges in some of the larger Taps, yes I have those too. But it is only on a couple of the Taps, the gouges are small, and the gouges are not on the cutting edges of the Taps. The cutting edges are clean, in tact and sharp. The very few gouges are on the threaded following surfaces, so that problem (for me) will not affect the tool's ability to cut proper threads. I did find that I needed to clean out a few loosely attached burrs from a couple of the Taps when they were machined. A small brass brush or even the "thread gauges" that come with this set easily dispatched those burrs. I have already used some of the Taps and they cut very well. The accessories that come with this set are quite remarkable and they work well too. I especially like the Tap Adapters that come with this set and they way they lock into the T-wrenches. My only complaint about the T-wrenches is that I can't lock the ratchet into place. You either go forward or backward via the selector flip/switch. If you have done much tapping of harder metals, you know that going forward and back quite often is needed to dislodge the burrs that you cut. I can accomplish it with the flip-lever, it would just be easier (at times) if the T-wrench didn't ratchet. But for cutting soft metal, I love that ratchet and the ability to move the handle without changing my grip is very appreciated. Overall, I think this set is a winner. I understand that it is not an Irwin/Hansen or even higher quality set. But for my use, that is OK and I expect to get many years of use from this set. I already have a much smaller, very cheap quality Tap and Die set that I've owned for 30+ years. Take care of your tools, use some finesse vs brute force, use cutting fluid, etc. and you can get many years even from a lesser quality Tap and Die set. :^) One update (4/23/16): I also purchased the Gator Tools V-Tap Guides that help keep the tap vertical (especially when starting the threads). The Gator Tools Tap Guide is a well made/machined part that earns a full 5-stars all by itself. Unfortunately, for this particular Tap set from GearWrench, on their smaller Taps (the Metric M5 and smaller) and (the Standard #10 and smaller), these Taps will not pass through the Big Gator Tools Tap Guide. That is because GearWrench makes the barrel (above the cutting portion of the Tap) slightly larger. Because of that design on their smaller Taps, it prevents the Tap from passing through the Big Gator Tape Guide. I've looked at these sizes in the Irwin Taps and it appears that Irwin maintains the barrel diameter so that it is not larger than the cutting portion diameter of the Tap. If something like this is important to you, then it may be worth considering Irwin vs GearWrench. I'm still happy with my GearWrench set and have some older Taps that will pass through the Big Gator tool just fine. Just thought I'd mention it as a difference for those considering this GearWrench set.

Scritto da: 338 Lapua Shooter

Good kit and good value

I purchased this kit about 5 years ago because I didn’t want to bring my snap on tap and die set to my shop where they would surely get lost or stolen by my staff. I didn’t have exceedingly high expectations of the kit but to be honest it’s just as good. As with any set you need to use a light cutting oil and as such I always use a thin oil. Over the years I have broken many bits and pieces of these types of kits, even my snap on ones and they always replace them…. But I have yet to break one of these. When I got my snap on brand products I was in the aftermarket automotive industry so I used them on a more routine basis, but now shifting careers to firearms I use different thread patterns and mostly the smaller ones which are far more prone to break, but these never have broken. To be entirely honest I paid almost half the price that they currently are selling for right now and since they’ve worked so well for me I’d have zero hesitation to buy a new set should I need them. The “big truck” brands I don’t think are any better and surely not worth the inflated cost which is likely 3-5 times as much as this kit. You’ll be happy with the kit.

Scritto da: Dexter See

Very good

Very good

Scritto da: Dustie Rose

High quality at a cheap price

For $210 I am extatic. This 114pc set performs just as good as my Snap-On set that has only HALF of the contents as this 114pc set and is twice the price. The ratcheting tap handles are elite, definitely a game changer when it comes to tight spots. Overall, I am very impressed with how these tap and die perform on both mild, stainless, and even aluminum. I would highly recommend this set to anyone.

Scritto da: ali

Very good

Great quality, love the ratchet

Scritto da: Laurence

Would love a refund or replacement

There seems a lot of play in the ratchet mechanism, and the ratchet direction lever has little resistance so when your removing the tap quickly the ratchet leaver keeps changing direction on its own account, this is extremely annoying,

Scritto da: Aivaras Ceida

Useless thing

Complete peace off ... Second time i used it and the centre ratchet mechanism fell out and i lost pressure spring

Scritto da: Mixx Cheang

Amazing!!

Very sharp and precise, bought a set of lang and did not fix a cross tread bolt almost snap the tool. Return it and bought gw tap and die set and work perfectly. Very happy with that tool safe a lot of time with the right tools.

Scritto da: MECANO

MECANO

bonjour l'outil est bien fait pour les endroit étroit merci.