Defender Security E 2478 horizontālās apdares bloķēšanas komplekts, 3-3/8 collu aizmugure, tērauds ar misiņa pārklājuma pogām, vienādi ar atslēgām, iepakojums (1 komplekts), misiņa apdare/melns

Brand:PRIME-LINE

3/5

58.50

Papildu informāciju par izmēriem un specifikācijām skatiet līnijas zīmējumā. Viegli uzstādīt tikai ar dažiem vienkāršiem instrumentiem. Tam ir vienkārša, vienas pogas vadība un automātiski izslēdzas pēc 2 minūtēm dīkstāves, lai pagarinātu akumulatora darbības laiku. Paredzēts lietošanai ar mērīšanas attālumiem līdz 32 pēdu garumā. Ir skaisti baltā un pelēkā krāsā ar viegli lasāmām un lietojamām funkcijām. Izgatavots no izturīga plastmasas korpusa un ietver precīzi iebūvētu lāzeru vieglai mērīšanai.

Papildu informāciju par izmēriem un specifikācijām skatiet līnijas zīmējumā. Viegli uzstādīt tikai ar dažiem vienkāršiem instrumentiem. Tam ir vienkārša, vienas pogas vadība un automātiski izslēdzas pēc 2 minūtēm dīkstāves, lai pagarinātu akumulatora darbības laiku. Paredzēts lietošanai ar mērīšanas attālumiem līdz 32 pēdu garumā. Ir skaisti baltā un pelēkā krāsā ar viegli lasāmām un lietojamām funkcijām. Izgatavots no izturīga plastmasas korpusa un ietver precīzi iebūvētu lāzeru vieglai mērīšanai.
Brand PRIME-LINE
Item Dimensions LxWxH 7.5 x 2.19 x 8.75 inches
Lock Type Key Lock
Material Mixed Materials
Style Simple

3

8 Review
5 Star
50
4 Star
19
3 Star
16
2 Star
4
1 Star
11

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: Gary Pick
For locking the door on the inside only.
For the price, product is acceptable. It felt like a cheap steel lock, but closer examination of my original antique locks revealed similar construction. I have an old farm house that had the original locks had rusted to the point that they were inoperable. Product was a drop in replacement. One screw holds the lock coverplate on. The latch can be switched around for an opposite opening door by removing the coverplate, removing the latch spring, flipping the latch around, and replacing the spring, and resecuring the coverplate. A 1/8" drill bit is required for installing the flat head screws that mount the lock and striker plate, a 25\64" drill bit is needed for drilling the handle shank. The skeleton key hole takes a slightly larger drill bit. Do not over tighten the door knobs on the shank or the latch will be hard to operate. Ensure the key and handle shank are aligned before drilling holds for the coverplate. The key will not lock the door from the outside, it only unlocks the door, if locked. The key will only lock the door from the inside. The latch has a lock, so the key is really unnecessary. If the latch is locked, the door must be unlocked from the inside, so that a child could lock you out. The key does not operate the door latch lock.
Scritto da: Murray183
Pretty good.
If you Compare the mechanism of this to an antique rim lock, the antique is far superior. But, if you are looking for a rim lock that works okay, but don't want to shell out $30.00 for an old one, than this is yours. As stated in other reviews, it is almost impossible to lock the dead bolt from the outside unless you file down some of the metal. I was installing this on an old door that had no previous holes in it. I used a spade bit for the Door knob spindle hole, but I wasn't sure what to use for the dead bolt. I would have just used a big spade bit, or even drill a few holes diagonally, but I didn't want to have to file down some of the internal workings, and I also have a dead bolt with a key on that door, so I left the latch dead bolt alone. Overall, it's okay for your money.
Scritto da: Sunny116
Hard to find at this price!
I had to replace our old cast iron horizontal rim locks after a couple had broken. I did not want to spend a fortune. I just wanted to replace a functional piece of door hardware without having to drill more holes. These were as close to the originals I could find for the price! They are packaged in the form plastic which proved more difficult to open than the box. lol. but it was laid out clearly and easy to understand. I really wish the knob was available in other colors to match the hardware plates, but no matter. My only issue is that these are about a 1/8" off or so on the total dimensions of the hardware so I will have to fill old holes and re-do for the new set. Make note the screw holes will be offset if you are doing a replacement and you will need a drill. Next purchase will be a drill. lol. Otherwise it is great to find these so affordable. Granted not as heavy duty as the originals, but they will do!
Scritto da: josh
Very cool
I love the way it looks! I installed on a door I made for my son's room looks fantastic!
Scritto da: Dave Pedro
Great fit
Love it
Scritto da: Juliana
It worked with tweaks
Pros- it works and looks ok Cons- definitely on the cheaper side. Had to take it apart and fix the springs on the first time using. It’s very noisy when you turn the handle. Trying to keep things on budget and this fit the budget, so for that it works but definitely not a high end product, but I knew that.
Scritto da: gar949
Perfect door knob for surface mount
This door knob was perfect for my situation. Fits the style of the old house
Scritto da: Amazon Customer
Rough handle grip
Door knob is rough. Not one solid knob but 2 pieces put together which causes the roughness. Hope that made sense!

Saistītie produkti

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array