E-Z LOK vītņots ieliktnis plastmasas flush misiņa vītņu ieliktņiem 2-56 50 gab.

Name: E-Z LOK vītņots ieliktnis plastmasas flush misiņa vītņu ieliktņiem 2-56 50 gab.
Brand: E-Z LOK
SKU: 0839137005196
Price: 37.14 EUR
Availability: InStock

Brand:E-Z LOK

3.7/5

€
37.14

E-Z vītņotie ieliktņi plastmasai E-Z LOK vītņotie ieliktņi plastmasai piedāvā izcilu turēšanas spēku. Misiņa vītņu ieliktņi un nerūsējošā tērauda vītņu ieliktņi ir paredzēti uzstādīšanai pēc formēšanas, lai ievietotu mašīnas vītnes termoreaktīvo plastmasu, termoplastu vai 3D drukātās detaļās. Rievotā konstrukcija ļauj aukstā veidā uzstādīt šos metāla vītņu ieliktņus bez nepieciešamības sildīt, tādējādi novēršot nepieciešamību pēc uzstādīšanas dzenāt vītnes. Turklāt tas samazina līstes izmaksas un samazina atkritumu daudzumu. Pieejami 3 stilos: vītņoti ieliktņi vienā līmenī, vītņoti ieliktņi ar atloku un vītņoti ieliktņi ar reverso spraugu. Visi trīs veidi tiek nospiesti vietā, lai nodrošinātu ātru un vieglu uzstādīšanu. Funkcijas Ieliktņi uzstāda auksti — nav nepieciešama apkure Likvidējiet vajadzību dzenāt vītnes pēc formēšanas Samazināt izmaksas un atkritumus Pareizi uzstādiet bez precīza urbuma dziļuma

Summa

Pievienot grozam Pērc tagad

EAN: 0839137005196

Kategorijas Industriālie un zinātniskie priekšmeti, vītnes, Skrūves un stiprinājumi, Rauts, Griežņu ieliktņi,

VIEGLI VIENKĀRTI STIPRI DIEGI – Visi trīs vītņu ieliktņu veidi tiek nospiesti vietā, lai nodrošinātu ātru un vieglu uzstādīšanu. PIEEJAMS 3 STILIOS — pieejami vītņotos ieliktņos, ar atloku vītņotiem ieliktņiem un reversās rievas vītņotiem ieliktņiem. LIETOŠANAI AR LIETOJUMU – vītņotie ieliktņi plastmasai ir paredzēti uzstādīšanai pēc formēšanas termoreaktīvo plastmasu, termoplastu vai 3D drukātās detaļās. VIENKĀRŠA UZSTĀDĪŠANA – rievotais dizains ļauj aukstā veidā uzstādīt šos metāla vītņotos ieliktņus, bez nepieciešamības uzsildīt, tādējādi novēršot nepieciešamību pēc vītnes dzenāt vītnes. PLASTMASAS VĪTNES IERĪTI – E-Z LOK Vītņu ieliktņi plastmasai. Pieejams misiņa vītņotos ieliktņos un nerūsējošā tērauda vītņotos ieliktņos. Uzstādiet aukstu.

Color	Gold
Country of Origin	USA
Exterior Finish	Brass
Fastener Type	Push-In
Item model number	240-002-BR
Manufacturer	E-Z LOK
Material	Brass
Product Dimensions	0.15 x 0.13 x 0.13 inches; 0.46 Ounces
Thread Size	#2-56

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Scott L Morris

Fit snugly in a 3D printed 6.5 mm hole

I use these in 3D prints and they work great, I use a 6.5 mm hole but your printer may behave differently but once you get the size dialed in these are great.

Scritto da: Robot Power

Item as described but did not work in HDPE plastic

These items are as described by the mfr. However, they totally failed in my application as threaded inserts for HDPE plastic. I made sure the pilot hole dimensions were exact with my CNC mill and pressed them in with a proper arbor press. These inserts pulled out very easily. I'm thinking perhaps the split being on the bottom side actually pushed them out as the screw was inserted because they spread most at the bottom. Don't know for sure but they didn't work and pulled out very easily in my application. I have used the flanged top models with the split at the top. Those ones with the same mounting hole dimensions locked in like a rock and cannot be pulled out without destroying either the plastic or the insert. So they work properly. In the correct material (wood?) I assume they will work but they didn't work well for me hence three stars.

Scritto da: Matthew

If you REALLY need tiny size, these are fantastic

They are strong, they hold in place extremely well. Due to the design, it can be difficult to install perfectly aligned in plastic. I would recommend seeking out the correct installation tool rather than trying to 'make do' with a soldering iron. Due to the design, I would suggest these are better for fit and forget installs, rather than end user, as the screws when turned are difficult to get it, squeak, and potentially can end up cracking plastic if not careful. These seem to be intended for locking the screws in place, as well as the part itself. Do I recommend them? Yes. Just be sure you need these and what they are used for.

Scritto da: APClam

These work great with PETG prints!

These are very good quality threaded inserts and these work perfectly with my PETG 3D prints. Just make sure to get an appropriately sized reamer for the recommended size hole and ream the hole to spec before trying to press fit the insert. I’ve used dozens of these now and the way they expand when the fastener is screwed down into gives them an incredibly strong hold. I’ve found that adding a tiny drop of light machine oil onto the fastener helps to eliminate the squeaking sound you might otherwise hear when tightening it down. Also makes it easier to tighten properly. Highly recommend!

Scritto da: prime numbers

Five Stars

Expensive but do the job