Endurance 48190 Quick Fix transportlīdzekļa sānu 4 plakanais savienotājs

Brand:‎Hopkins Towing Solutions

3.3/5

40.31

Hopkins Manufacturing Corporation padara jūsu vilkšanas pieredzi vienkāršāku un izdevīgāku, izmantojot inovācijas un vērtību. Kā Hopkins izturības produkts, šis produkts ir paredzēts maksimālai izturībai pret skarbajiem laikapstākļiem, koroziju un normālu nodilumu. Hopkins piedāvā dažādus vilkšanas risinājumus, tostarp transportlīdzekļu vadu komplektus, adapterus, transportlīdzekļu un piekabju savienotājus, atdalīšanas sistēmas un daudz ko citu. Mūsdienās vairāk nekā 40 procentus no mazumtirdzniecības kategorijas pārdošanas apjoma veido Hopkins inovācijas. Hopkins Quick Fix 4-Flat Connector apvieno Endurance profesionālo pakāpi ar Quick Fix 4-flat vieglumu un ātrumu vienkāršam remontam. Vienkārši noņemiet bojāto savienotāju, ievietojiet savienotājā vadus un piestipriniet vāku, lai nostiprinātu vadus. Iebūvētās LED testa gaismas apstiprina katras piekabes funkcijas pareizu savienojumu. Tam ir izturīgs putekļu vāks un stieples aiztures plāksne. LED testa gaismas ērti apstiprina elektrisko nepārtrauktību, savukārt viegli velkamie pirkstu rokturi novērš stieples nostiepšanu. Pieejams transportlīdzekļa vai piekabes pusē.

Savienojums spraudņa iekšpusē aizsargā savienojumus no elementiem. Ergonomiski velkamie pirkstu rokturi atvieglo vadāmību un novērš stieples nostiepšanu. Iekļauts izturīgs putekļu pārsegs, lai novērstu koroziju un stieples aiztures plāksne. LED testa gaismas ērti apstiprina elektrisko nepārtrauktību. Apvieno Endurance profesionālo pakāpi ar Quick Fix vieglumu un ātrumu vienkāršam remontam.
Brand ‎Hopkins Towing Solutions
Country of Origin ‎Mexico
Customer Reviews 4.2 4.2 out of 5 stars 337 ratings 4.2 out of 5 stars
Domestic Shipping Item can be shipped within U.S.
Exterior ‎Smooth
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Item model number ‎48190
Item Weight ‎2.24 ounces
Manufacturer ‎Hopkins Manufacturing
Manufacturer Part Number ‎48190
Model ‎48190
OEM Part Number ‎48190
Product Dimensions ‎1.25 x 2.88 x 6.88 inches

3.3

13 Review
5 Star
66
4 Star
11
3 Star
10
2 Star
4
1 Star
9

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: DH Cares
Make sure wires seat proper
Great product but the blades aren’t great for plastic coated wire but are great for gxl. Ohm it out using dmm black meter lead on ground plug lead and tap each separate conductor in the blade to make sure the light comes on b4 putting cover on. Will save u some time.
Scritto da: porter01
Quality part!
I had accidentally damaged my hitch wiring and found this replacement part on Amazon. It seemed too easy, but it really was no problem to install and get working. I had to take it off the first time because I did not check to be sure I had cut away enough of the old, frayed wiring. Once I did, it was easy to attach and worked well.
Scritto da: RVer Surface user
nice secure mounting for a flat four connector
Only issue is as others have stated, getting wire to make a connection can be a little challenge. I used 16 gauge wire and has to slightly bend in the clamping 'V'. Easiest to place wire over the 'V' and push wire into it to make connection using a flat screwdriver. Once in it is secure and works well
Scritto da: Dane
UNRELIABLE
I liked the design so I thought I'd try this out. Installation was quick and easy. However, the "tail light" port failed the first day. I double checked all wiring and connections and all was good. So, I figured I just received a faulty one. I returned it to Amazon and purchased a 2nd one. Within 1 week, the "tail light" port failed again. Now I believe there's an inherent manufacturing issue with these connectors. I returned the 2nd one and replaced with a Reese product and have had no issues since. I hope Hopkins fixes the reliability issue as these plugs "could be" a great product.
Scritto da: Scott Villwock
It works well
I bought this so I could just use the wire setup I had and worked really well. I really like the indicator lights. Made it easier to setup by myself. What I didn't like about it is the rubber it's made out of is really soft, and is getting harder now that it's been in the weather. Not sure if will last very long but so far so good.
Scritto da: Corey da silva
Exactly what you need
This allows you to pick and choose what wire does what while also being a trailer light tester. Certainly a valuable bang for your buck
Scritto da: Just Jeepin
Works great !!!
I don't know why they have stretch and sheerness on the review questions for this plug but I do like it. Now I did go ahead and not only push the wire into the prongs but a also soldered them in for extra reassurance that I would not ever have a short in the wiring.
Scritto da: Toolman
Doesn't work like it is supposed to.
I bought this replacement plug after the single male connector on my Toyota truck plug broke off in the U-Haul connector on my trailer. Wire connection to this plug is supposed to be accomplished by pushing wires that have not been stripped down into vee-shaped slots in four flat metal prongs, and screwing down a clamping plate on top of them. The slots in the prongs are supposed to cut through the insulation and make contact with the wires. None of the prongs cut through the insulation on the wires from the truck's harness, and I had to manually cut the rest of the way through the insulation with a utility knife. This left the little remnant of insulation on the ends of the wires hanging on by a thread, and means that those little pieces of insulation could strip completely off and let the wires slip out of the vees if pulled on hard enough. To counter that I spread clear silicone across the wires at the exit point in hopes that would help hold the wires securely. Also, the hex nuts on the back of the connector are supposed to be held in place by hex shaped pockets in the plastic, but very little torque on the screws that hold the clamping plate on will strip out the hex pocket and let the nuts turn. I'd give the connector 1 star, but I do like the four little red LED lights on the connector that show you that you have connectivity.
Scritto da: Justin
Mostly works
Works for the most part. On mine one of the led's don't work. But it's already installed so I'm going to live with it.
Scritto da: Antoine G.
Works great but bad instructions
The instructions only said to insert the wires in the V shape connector but I had to squeeze the connectors so that it really touches the metal of the wires.
Scritto da: Kelly Z.
Works as advertised
Easy to install in minutes with simple tools. At under $20 for the unit is a lot cheaper than the mechanic charger $145 for similar service. Looks durable, will know more after it has been in use for a longer period of time. Thinking of ordering a second one to keep in the side pocket of the SUV "just in case..."
Scritto da: Bobby
Easy install
The install took 2mins, literally. Lights work as advertised.
Scritto da: Kevin
Keep one handy. Saved the day recently when my buddy damaged his.
Easy to install without special tools. Good purchase.

Saistītie produkti

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array