Grafix Dura-Lar mitrā materiāla 25 x 50 x 0,004 collu plēve, kas pārklāta, lai uzņemtu ūdens bāzes materiālus, lieliski piemērota akvareļiem, kompozīciju plānošanai, krāsojamām virsmām vai iespieddarbiem, pēdām mitra materiāla 25 x 50 pēdas .004

Brand:Grafix

3.6/5

155.39

Grafix .004” Wet Media Dura-Lar Filma ir izstrādāta, lai sniegtu jums labākās gan Mylar, gan Acetate īpašības. Šī izturīga plēve ir apstrādāta no abām pusēm, lai uzņemtu ūdens bāzes materiālus, marķierus un tinti. Tas noslaukās ar mitru drānu, lai to varētu izmantot atkal un atkal! Izmantojiet to nākamās gleznas plānošanai vai kā gleznas virsmu. Tāpat kā citus Dura-Lar veidus, šo plēvi var izmantot arī sietspiedei, trafaretiem, pārklājumiem, griešanai ar presēšanu un citiem. Izgatavota no pārklāta poliestera, šī īpaši dzidra plēve var izturēt temperatūru no -94 ℉ līdz 300 ℉ (-70 ℃ līdz 150 ℃), padarot to lieliski piemērotu lietošanai ar reljefu un karstuma instrumentiem. Šis 0,004 collu Wet Media Dura-lar rullis ir 25 collas plats un 50 pēdas garš. Noteikti apskatiet pārējo Grafix Dura-Lar līniju, kas ir pieejama dažādos izmēros, krāsās, biezumos un ir pabeigta atbilstoši jūsu individuālajām vajadzībām! Mūsu dura-lar produktu klāstā ietilpst mūsu oriģinālie caurspīdīgie, matētie, mitrie materiāli, Dura-spilgti necaurspīdīgie un ar līmi balstīti. Grafix ir pārdod kvalitatīvas plastmasas plēves radošajām industrijām kopš 1963. gada. Grafix produkti atbilst mākslas, amatniecības, grafikas un dizaina tirgiem ar tradicionālām un novatoriskām plēvēm, lai rosinātu jūsu radošumu.

Nav pieejama neviena vienība
50 PĒDU ROLL — šis 0,004 collu Wet Media Dura-lar rullis ir 25 collas plats un 50 pēdas garš. Ražots ASV. DAUDZLIETOŠANAS: Dura-Lar Wet Media Film tīras salvetes, lai tās izmantotu atkal un atkal. Atkārtotai lietošanai vienkārši noslaukiet ar mitru drānu. DAUDZI PIELIETOJUMU: šī plēve ir apstrādāta no abām pusēm, lai uzņemtu ūdens bāzes materiālus, marķierus un tinti. Lieliski piemērots gleznošanas kompozīciju plānošanai, kā krāsošanas virsma vai grafikas veidošana. KARTUMSIZTURĪGA: Izgatavota no īpaši dzidra poliestera, šī spīdīgā plēve var izturēt temperatūru no -94 ℉ līdz 300 ℉ (-70 ℃ - 150 ℃), padarot to lieliski piemērotu lietošanai ar reljefu un karstuma instrumentiem. IZTURĪGA: Grafix Dura-Lar mitrās vides plēve ir izstrādāta, lai sniegtu jums labākās gan Mylar, gan Acetate īpašības. Šī plēve neplīsīs, neuzsūks mitrumu un nemainīs krāsu ar vecumu.
Assembly required No
Batteries required No
Country of Origin USA
Customer Reviews 4.5 4.5 out of 5 stars 200 ratings 4.5 out of 5 stars
Import Made in US
Item model number R04DW2550
Item Weight 2.24 pounds
Manufacturer Grafix
Product Dimensions 25 x 4 x 4 inches

3.6

13 Review
5 Star
75
4 Star
11
3 Star
9
2 Star
1
1 Star
5

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: Jode Bode
Fantastic for colored pencil drawing....
I used a whole roll (yes, it was indeed 20” x 12 ft) trying out color pencil....I just ordered my second roll along with the wet media grafix dura lar so I can try it out using water color and inktense....I’ve added a couple photo’s of my colored pencil drawings. There are advantages and disadvantages of any media....most colored pencil paper/media requires 20 layers to build up color depth...that will never happen with this dura lar matte, it holds about 3 to 5 layers depending on brand of colored pencil used. Some might call this a disadvantage, but I love it. I’ve got to get the color just right within one to three layers, which means this process goes way faster and means less time sharpening my pencils down to stumps. At the cost of quality colored pencils...using this dura lar....also saves me money in buying less colored pencil replacements. This Dura-Lar can also sustain 100% erasing as well....but gently....otherwise erasing can flatten out the tooth of this material to where is super smooth and shiny and won’t hold color. I learned to use an electric erasure with very little pressure...fantastic media. No other media allows for 100% clean erasing. Also, no need for blenders nor sealant, another money saver. I will continue using for my colored pencil art....after Using one roll....I have no negatives.
Scritto da: Amanda Evans
Heat-resistant stenciling
I purchased this to make a custom pyrography stencil. The material held up better than expected while using my wood burning tool near it. I used my Cricut to cut the design. The fine point blade does NOT do well cutting this thick material. It quickly dulled 2 blades. I will try the deep-point blade next time.
Scritto da: Alex
Exactly what I was looking for
I used this product to build three dimensional gemstones and it was perfect. I needed something soft enough to fold without cracking but strong enough to support the weight of an LED tea light and to hold up to rain/wind. It was perfect. I bought a handful of rolls and each one matched the description's measurements. Both sides are matte and more opaque than not--light will transmit through (as evidenced by the attached picture) but not everything will. This company does make clear plastic sheeting if that suits your needs better. Both sides can be written/drawn on. Pencil erases very easily (but not so easily that it will smudge off). I'm excited to use this again for more projects, and to expand upon the installation I originally bought this for.
Scritto da: HHD
I bought this to try out for my artwork...
I bought this to use for my artwork, and so far have tried it with graphite and colored pencil. The techniques are different then using paper obviously, but I have enjoyed it so much!
Scritto da: Splendid Colors
Great light diffusion material, cuts well on a laser cutter
I used this as a light diffuser in lanterns for a wedding. I wanted something that would work like rice paper but less fragile or likely to get soot stains from the laser-cut edges. It can be glued to MDF with Mod Podge and diffused the fairy lights very effectively. My clients were thrilled with the results, and I'm going to use it for other projects too.
Scritto da: Amazon Customer
excellent base for drawing if you are tired of paper
I just tried it for the first time, it looks amazing on it with graphite pencil and color pencil drawing
Scritto da: S.M.
Heat resistant
I had been in search of a material that was heat resistant that I could creat on my own for Encaustic painting. I was super happt with this product. It was easy to cut and I was able to use a heat gun without damaging the stencil I created.
Scritto da: Duane B.
Use it for my blast cabinet
Ok so I'm not sure what this stuff is really used for but I built a large sandblast cabinet and my sight window is a piece of tempered glass 24" long x 16" high and I use this for the protective film for the glass.........it works awsome and cost is effective as to self stick ones sold for sandblasting
Scritto da: deb
Flaw on the roll, but this is a great product.
As I've used this drafting film to draw on, I cut pieces to size depending on what I am drawing. It deserves 5 stars, but unfortunately there is a line running through one end of the roll, about 6 inches from the end. I didn't see the flaw until I started working on my first piece of work. That said, this is a fantastic drawing surface, great for coloured pencil, graphite and ink. I was disappointed with the flaw in the roll I received but have not returned it. Been trying to cut around it for specific sizes. I will be following up with customer service.
Scritto da: Amazon Customer
Dura-lar description.. poor
The discreption does not say it being a wrap.For the price I paid I expected something sturdier for my craft.This is disappointing ,and a rip-off!
Scritto da: G Magny
excellent produit
Projet artistique
Scritto da: Randalt
Good stencil material
Easier to use than the 40" roll, and cheaper to buy 2 of these.
Scritto da: Vic
Versatile
Great for all kinds of medium.

Saistītie produkti

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array