Guillow's P51 Mustang lāzergriešanas modeļa komplekts, dzeltens

Brand:Guillow

3.8/5

90.01

PRODUKTA APRAKSTS ASV gaisa spēku lidmašīnas P-52 Mustang spārnu platums ir 27,75. Ziemeļamerikas P-51 Mustang, iespējams, bija labākais universālais vienvietīga virzuļdzinēja iznīcinātājs, kas tika izmantots 2. pasaules karā. Pirmais U.S.A.A.F. kaujas grupa ieradās Lielbritānijā 1943. gada novembrī, un kopš tā laika līdz kara beigām P-51 izpelnījās apskaužamu reputāciju kā tālsatiksmes iznīcinātājs-eskorts bumbvedējiem B-17 un B-24, kas uzbruka dziļi ASV centrā. vācu dzimtene. • Precīzi lāzera grieztas balsas detaļas, mēroga plastmasas riteņi, pilns uzlīmju komplekts, vakuuma plastmasas detaļas un visi nepieciešamie piederumi • Ideāli piemērots gumijas jaudai, U-Control un brīvam lidojumam, kā arī displejam • Pilnīgas instrukcijas, lai izveidotu vai nu lidot. vai statiskam displejam NO RAŽOTĀJA Guillow's ir atzīts līderis kvalitatīva mēroga balsa lidmašīnu modeļu komplektu jomā. Mūsu modeļu konstruēšanas komplekti ir pēdējais vārds mēroga reālismā superdetaļu ventilatoram un viegls svars tiem, kas būvē un lido. Katrs modelis ir maza, bet uzticama lidmašīnas kopija, kas plaši pazīstama ar darbiem kara laikā vai mūsdienās. 400. sērijā ir 3/4 mēroga Otrā pasaules kara ikonu militāro lidmašīnu modeļi ar precīzām lāzergrieztām detaļām vieglākai montāžai.

Nav pieejama neviena vienība
Ražots ASV. Pilnīgas instrukcijas, lai izveidotu lidojumu vai statisku displeju. Lieliski piemērots gumijas jaudai, U-Control un brīvam lidojumam, kā arī displejam. Precīzi lāzera grieztas balsas detaļas, mēroga WWI plastmasas riteņi, pilns uzlīmju komplekts, vakuumformētas plastmasas detaļas un visi nepieciešamie piederumi. ASV gaisa spēku lidmašīnas P-52 Mustang spārnu platums ir 27,75. maza, bet uzticama kopija. Viegli saliekams. Amerikā ražots.
Brand Guillow
Color Yellow
Country of Origin USA
Customer Reviews 4.7 4.7 out of 5 stars 196 ratings 4.7 out of 5 stars
Domestic Shipping Currently, item can be shipped only within the U.S. and to APO/FPO addresses. For APO/FPO shipments, please check with the manufacturer regarding warranty and support issues.
Included Components Instruction Manual
International Shipping This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 20.25 x 1.75 x 7.25 inches
Item model number 402 LC
Item Weight 0.95 Pounds
Item Weight 15.2 ounces
Manufacturer Flat River Group
Manufacturer recommended age 14 - 15 years
Material Plastic,Rubber
Number of Pieces 1
Product Dimensions 20.25 x 1.75 x 7.25 inches
Theme Military

3.8

8 Review
5 Star
82
4 Star
10
3 Star
5
2 Star
2
1 Star
2

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: bob
Great price, Fast delivery
This famous WW 2 fighter is faithfully represented in the balsa wood model kit. The seller had it at a very reasonable price and delivery was super fast.
Scritto da: buteoseye
Builder must provide parts ! Materials included not in plans
Pros: generous amount of wood. Cons: no decals for under wings. Only two propeller blades - make two on your own. Tissue paper is extremely delicate. I used diluted white glue with very disappointing results: spraying the parts with clear acrylic and spray paint made the skin wrinkly. Wheels are cheap and there is no rear wheel. Flying this model is taking a real chance for damage. Its so large that I don't where to put it. Lastly the wing did not fit into the fuselage. I had to saw off part of the front of the wing.
Scritto da: Mike B.
Good model.
Guillow’s make a good model but getting pricey, not much competition out there so the price goes up. Kids today use their fingers to press keys not to build things, do I sound old, l don’t think so. It’s a great hobby. I wish Guillow’s would make additional models instead of the same old standards.
Scritto da: Stephen Johnston
Another great kit from Guillow's
I have building balsa models since the early/mid 1960's, when you could get them for about 30 cents. They were solid body balsa, and I remember breaking them more often than not during assembly. Then during the mid to late 70's I got back into balsa kits, they were die cut and weren't bad, unless the dies were dull. Now I recently decided to return to the hobby and was pleasantly surprised with the laser cut parts, which separate without breaking. I have not yet started on this one, but I have done some others recently that are great kits. Though I do wish they came with the plastic props that would be more authentic, (3 - 4 blade props) than the two blade. I have tried to keep them more authentic than the two blade. And since the advanced adhesives (CA's) they are more enjoyable than ever, since the parts stay where they are suppose to be without moving, not like the older glues did.Back to the kit, I did open it and inspected it, and I am looking forward to building it..
Scritto da: R. M. Richardson
Lighter and better
Guillow's kits have been unchanged for 50 years until now. Laser-cut kits are far superior to old die-punched versions. The balsa is much better quality and is now selected for lightness rather than hardness and ability to survive cutting dies. Unfortunately, when retooling for laser cutting, they retained the heavy outlines of the original kits and there is just too much wood in them to be really good flyers. The quality of wood, vacuformed parts, and plans is very good and they build into impressive models. Just don't expect them to be super flyers. The stuck-in-the-60s instructions are quite funny in places, such as "mail us your questions and don't forget to include the box ends". If they had freshened up the plans and box art, and lost some weight during the laser conversion, these kits would be outstanding. They are still quite good, though, and within the abilities of most beginners. They are a good introduction to the sport of rubber-powered scale free flight.
Scritto da: Poppa Joe
Their products are great quality and simple and concise instructions and plans.
I am an old man who has rated Guillows models as so much fun to make over the years. I’ve made many many of your kits and continue to try and make a better one each time. Thank you for the quality product that has brought so much enjoyment to me over my life time. This is not a shallow response. Thanks so much.
Scritto da: N. Wallach
Looks great when built, and a pleasure to boot
I bought this kit on a lark and took a while to get started on it. Once I did, I was very glad I did. The kit is very easy to understand and build. The instructions are very clear and if you take your time with each step, the results are fantastic. There are options for flying this kit with various motive power, but I built it as a flying specimen and am hanging it from my ceiling. Painted, and with decals applied, it is quite an amazing sight. most of the parts are balsa and the laser cut forms make this kit a breeze to build while achieving great results. If you've never built one of these types of models before and are hesitant because they look difficult, try this type as this kit came out great for me.
Scritto da: Don’t tread on me and Boo
You will need a 23”x36” or bigger layout board
Holy cow! I just opened it and it is bitchin! I have put more than one together so this should come out nice. BIGGER INSTRUCTIONS MAKE IT BETTER. More details too! I will be back when it’s finished! UPDATE: I have made mods to mine and I took away 1 ⭐️ because the 1/16” stringers are AWFUL. THEY ARE TOO THIN AND VULNERABLE. Out of all the ones provided only maybe 9 are worth a shit. Be patient.

Saistītie produkti

hot
hot
hot
Daron pastmarka PS5810-2 Jenny
3.6/5

€ 71.90

Daron pastmarka PS5810-2 Jenny
3.6/5

€ 71.90

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array