HawkEye ACC-FF-1567 FishTrax zivju meklētāja piesūcekņa stiprinājums

Brand:Hawkeye

3.2/5

39.99

HawkEye FishTrax piesūcekņa stiprinājums ļauj uzstādīt FishTrax zivju meklētāju gandrīz jebkurā vietā uz laivas, kajaka, kanoe vai peldošā. Ja jums nav gludas plakanas virsmas, ko uzstādīt uz piesūcekņa stiprinājuma, tas pieķersies FishTrax montāžas paliktnim vai montāžas diskam, lai nodrošinātu optimālu zivju meklētāja novietojumu. FishTrax piesūcekņa stiprinājums ir saderīgs ar FishTrax 1, FishTrax 1X un FishTrax 1C.

Nav pieejama neviena vienība
HawkEye produkti tiek ražoti gan ASV, gan ārzemēs, izmantojot tehnoloģiju, kas izstrādāta un izstrādāta ar amerikāņu atjautību. Apvienojiet ar mūsu montāžas paliktni vai montāžas disku, lai palielinātu lietojamību; Savietojams ar FishTrax 1, FishTrax 1X un FishTrax 1C zivju meklētājiem. Vienkārša stiprinājuma skrūve nodrošinās jūsu FishTrax zivju meklētāju drošu un viegli redzamu. Ātrā atlaišana nodrošina vieglu pārnēsāšanu un ātru piestiprināšanu, ja jums steidzami jāpārvietojas uz citu laivas daļu. FishTrax regulējams stiprinājuma kronšteins ar piesūcekni viegli uzstādāms uz jebkuras līdzenas virsmas uz jūsu kajaka, mazas laivas vai kanoe laivas.
Brand Hawkeye
Country of Origin China
Customer Reviews 4.1 4.1 out of 5 stars 233 ratings 4.1 out of 5 stars
Is Discontinued By Manufacturer Yes
Item Dimensions LxWxH 5 x 3 x 3 inches
Item model number ACC-FF-1567
Item Weight 1.6 ounces
Manufacturer NorCross Marine Products
Other display features Wireless
Product Dimensions 5 x 3 x 3 inches
Special features Adjustable
Weight 0.1 Pounds

3.2

9 Review
5 Star
60
4 Star
17
3 Star
8
2 Star
5
1 Star
10

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: PDH
The Engineering Sucks!
I bought this to use with the HawkEye Fishtrax 1C fish finder. I assembled the transducer to the suction mount as instructed. There is a huge gap between the outside of the transducer ears, and the inside of the suction cup ears (see photo). If you try to tighten it down with the included nut, it seriously stresses/bends the suction cup ears, and has the potential for breaking the ears. (see photo) And it doesn't tighten sufficiently to make the transducer secure to the suction mount. I emailed the "Support Center" and they didn't have any answers. I will make it work but not with any help from the "Support Center". Edit: After they finally understood my complaint, they did email me and offered to send a few more washers, but the fact remains that this mount and the 1C ducer are not specifically made for each other.
Scritto da: Balddude
Nice little inexpensive must have for your float tube.
I love this mount; having my small fish finder right in front of my face, yet out of the way, is nice. I also love having the option of attaching the transducer to this mount or tossing it out on its float foam. Fully adjustable angles for both the fish finder and the transducer.
Scritto da: Matthew D. Mercer
Super idea but...
The suction cup is small and too weak. I even installed a smooth metal plate for better adhesion but not strong enough.
Scritto da: Evan Miller
Grab a Suction Cup Mount!
This thing works great, but I would only trust the suction strength when attaching it to a Stick-on Suction Cup mount (The kind for GPS devices), if its attached to anything slightly porous it will pop off too easily. Just buy the $8 mount, stick it to a flat spot on your Kayak/Boat and you have a solid, instantly removable Fish Finder!
Scritto da: Brian L
Cheap, easily adaptable to any fish finder
So I don't have a Fishtrax Fish Finder, but hummingbird did not make a product like this. I made a simple adapter plate out of 1/4" plastic to attach my PiranhaMax 4. The suction was perfect for cruising speeds and hitting waves. I wasn't about to drill holes in my fiberglass dash and needed a solution that could be removed/installed as needed. Nice product at a very, reasonable price.
Scritto da: Donald Lloyd
Fishfinder mount
Mount requires an extremely smooth surface to work. I had to put tape over the area I wanted to mount it in order for it to stick. I would prefer a different type of mount instead of the suction cup.
Scritto da: Dynamic Lures
Not perfect
No instructions. Trouble with installing transducer
Scritto da: JG
Works perfect.
Used to replace a broken mount on my depthtrax. Worked perfect and saved me from having to buy and install a whole new depth finder.
Scritto da: Liem Ho
I love it
Very very good quality

Saistītie produkti

hot
hot
Garmin 010-01960-01 GT20-TM devējs
3.6/5

€ 143.89

Garmin 010-01960-01 GT20-TM devējs
3.6/5

€ 143.89

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array