HHIP 3900-4866 5/16 kvadrātveida galvas standarta virpas patronas uzgriežņu atslēga 5/16 galvas izmēra standarta

Name: HHIP 3900-4866 5/16 kvadrātveida galvas standarta virpas patronas uzgriežņu atslēga 5/16 galvas izmēra standarta
Brand: HHIP
SKU: 0769053026602
Price: 38.89 EUR
Availability: InStock

Brand:HHIP

3.5/5

€
38.89

Preces iepakojuma izmērs: 1,5 L x 1,5 W x 4,0 H. Izmantošanai uz virpas patronām. Izgatavots no augstas kvalitātes instrumentu tērauda. 5/16 kvadrātveida galviņas standarta virpas patronas uzgriežņu atslēga.

Summa

Pievienot grozam Pērc tagad

EAN: 0769053026602

Kategorijas instrumenti un mājokļa labiekārtošana, Elektroinstrumenti un rokas darbarīki, rokas darbarīki, atslēgas, Griezes uzgriežņu atslēgas,

Brand	HHIP
Compatible Devices	Lathe
Included Components	Wrench
Material	Alloy Steel

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: David Johnson

Sliding T-Handle works fine.

Happy with the seller. No problems and the wrench worked as it should.

Scritto da: tony salazar

Is perfect

good fit

Scritto da: eric c.

Needs corners radiused

Likes are . Sturdy made, long tee handle that slides for torque leverage. Dislike. Only one and that is corners of the square drive need to be radiused to allow the key to insert fully into the chuck. This radius is easy enough to do on a bench grinder.

Scritto da: joseph fusco jr

High Quality

Heavy for its size and well made. Great product.

Scritto da: Mcode 21

Good tool

I measured it wrong, but I got just what I ordered. Of course I found mine so I sent it back great response. Well done.

Scritto da: Amazon Customer

Lathe Chuck Key

Every chuck key I've ever used...drill chuck (Jacobs type) or lathe chuck (3 or 4 jaw) has been a 'T" type with the handle pressed or welded into the body. This key has a loose handle. I presume to give the user more leverage when tightening. I tried to use it but stopped in the middle of a job and brazed it into place. Otherwise, the material appears to be hard enough to resist wear and the square drive end is a nice fit with no tendency to slip out of my ancient and worn 3-jaw chuck.

Scritto da: John Rosenfelder

Fits my South Bend 9B

Fits my South Bend 9B

Scritto da: Chris Noe

Square corners wouldn't fit

Chuck hole was worn and the square corners wouldn't fit so I heated it red hot and tapped it into the chuck hole. The corners flattened and the square drive got fatter for a perfect fit. Retempered it in cold water. 100% PERFECT

Scritto da: John Brouwers

Five Stars

Great product and service