HyLoft 01031 pie sienas montējama saliekamo riepu glabātuve, 32 līdz 48 collas plata, atbalsta 300 mārciņas, sudraba

Name: HyLoft 01031 pie sienas montējama saliekamo riepu glabātuve, 32 līdz 48 collas plata, atbalsta 300 mārciņas, sudraba
Brand: ‎HyLoft
SKU: 732454581179
Price: 158.97 EUR
Availability: InStock

Brand:‎HyLoft

3.7/5

€
158.97

PRODUKTA APRAKSTS HyLoft 48 collu W saliekamā TireLoft ir labākais riepu uzglabāšanas risinājums, kas apvieno izturību ar elastību. Tā unikālais dizains ļauj to salocīt pie sienas, kad to nelieto, un to var regulēt no 32 collu platuma līdz 48 collām. Pilnībā izgatavots no stipras, vieglas un izturīgas tērauda caurules ar skrāpējumiem izturīgu sudraba pulvera pārklājumu. Pabeidzot, saliekamais TireLoft izturēs līdz 300 mārciņām. Lieliski piemērots sezonas riepu, RV riepu un visurgājēju riepu uzglabāšanai, un TireLoft ērti ietilps līdz pat 4 standarta transportlīdzekļu riepām. AMAZON.COM Model 1031 HyLoft Folding Storage System ir lielisks vairāku risinājumu produkts - tajā tiek uzglabātas sezonas riepas, atpūtas riepas vai kāpurķēžu riepas un riteņi... vai arī tas ir salokāms sienas bēniņi, kurā glabājas kastes, kastes, lielapjoma produkti... vai tajā tiek glabāts velosipēds... vai arī tas ir saliekams darbagalds. Uzstādīšana ir vienkārša. To piestiprina pie sienas tapām uz gatavām vai nepabeigtām sienām. Bēniņu platums ir regulējams no 32 līdz 48 collām. Bēniņi ir pilnībā izgatavoti no stipra, izturīga tērauda. Kravnesība ir 300 mārciņas, kad ieskrūvē taps. HyLoft ir atzīts par nozares līderi garāžu uzglabāšanas jomā, piedāvājot unikālus, viegli lietojamus un daudzpusīgus produktus, lai padarītu garāžu par vēl vienu pilnībā pieejamu un sakārtotu telpu jūsu mājā. Pievienojiet vairāk vietas ar nelielu ieguldījumu. NO RAŽOTĀJA Modelis 1031 HyLoft Folding Storage System ir lielisks vairāku risinājumu produkts - tajā tiek glabātas sezonas riepas, atpūtas riepas vai kāpurķēžu riepas un riteņi... vai arī tas ir salokāms sienas bēniņi, kurā glabājas kastes, kastes, lielapjoma produkti... vai tajā tiek glabāts velosipēds... vai arī tas ir saliekams darbagalds. Uzstādīšana ir vienkārša. To piestiprina pie sienas tapām uz gatavām vai nepabeigtām sienām. Bēniņu platums ir regulējams no 32 līdz 48 collām. Bēniņi ir pilnībā izgatavoti no stipra, izturīga tērauda. Kravnesība ir 300 mārciņas, kad ieskrūvē taps. HyLoft ir atzīts par nozares līderi garāžu uzglabāšanas jomā, piedāvājot unikālus, viegli lietojamus un daudzpusīgus produktus, lai padarītu garāžu par vēl vienu pilnībā pieejamu un sakārtotu telpu jūsu mājā. Pievienojiet vairāk vietas ar nelielu ieguldījumu. Redzēt vairāk

Summa

Pievienot grozam Pērc tagad

EAN: 732454581179

Kategorijas instrumenti un mājokļa labiekārtošana, Mājokļi un mājas organizācija, Garāžas glabāšana, Saglabāšanas plaukti,

VIEGLA UZSTĀDĪŠANA: komplektācijā ir iekļauta aparatūra, un plaukti tiek piestiprināti pie gatavām vai nepabeigtām sienām - tie ir jāuzstāda tapās; Lai atvieglotu uzstādīšanu, ļoti ieteicams izmantot tapas meklētāju un akumulatora urbjmašīnu. VISAS TĒRAUDA KONSTRUKCIJA: Izgatavota no izturīga tērauda, ar skrāpējumiem izturīgu sudraba pulvera pārklājumu, šī riepu novietne ir veidota tā, lai tā būtu izturīga. ATBILST JŪSU VAJADZĪBĀM: TireLoft var noregulēt no 32 collu līdz 28 collu platumam un iztur līdz 300 mārciņām. GUDRS, Elastīgs DIZAINS: Hyloft salokāmās uzglabāšanas sistēmai ir unikāls dizains, kas ļauj to salocīt pie sienas, kad tā netiek lietota, tādējādi nodrošinot daudzpusīgu lietošanu, sākot no riepu uzglabāšanas līdz garāžas darbagaldam. ĒRTS UZGLABĀŠANAS RISINĀJUMS: Izmantojiet šo pie sienas stiprināmo riepu bagāžnieku, kas ir ideāli piemērots sezonas riepu, RV riepu, ATV riepu un citu glabāšanai.

Assembly Required	‎No
Batteries Included?	‎No
Batteries Required?	‎No
Brand	‎HyLoft
Color	Silver
Color	‎Silver
Country of Origin	‎China
Customer Reviews	4.7 4.7 out of 5 stars 1,422 ratings 4.7 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish	‎Powder Coated
Finish Type	‎Powder Coated
Included Components	‎Hardware
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎01031
Item Package Quantity	‎1
Item Weight	‎14.97 pounds
Item Weight	‎6.8 Kilograms
Manufacturer	‎Knape & Vogt
Material	Alloy Steel
Material	‎Alloy Steel
Mounting Type	‎Ceiling Mount
Number of Shelves	1
Number of Shelves	‎1
Part Number	‎VD-56384HW
Product Dimensions	22"D x 22.5"W x 24.5"H
Product Dimensions	‎22"D x 22.5"W x 24.5"H
Product Dimensions	‎22.5 x 22 x 24.5 inches
Room Type	‎Garage
Size	‎1
Special Feature	Portable, Lightweight
Special Feature	‎Portable, Lightweight
Special Features	‎Portable, Lightweight
Style	‎TireLoft
Warranty Description	‎Limited Lifetime

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Renegade Raceworks

Not bad for the money

A little flimsy, several of the bolts had apparently come loose during shipping. Once I got it all bolted back together it seems it will do ok for my purposes(motorcycle tires)

Scritto da: Flip

Solid Tire/Wheel Storage

Great solution to free up some floor space. No problems fitting 255/40/17 on 17x10 wheels. Only gripe that I have is that the hardware does not include washers. They're probably not required, but in order to protect the steel tubes, and to better distribute the clamping force, they really should be. Not a deal breaker, and overall it's a really solid product.

Scritto da: Blake M. Parker

Works Great, Strange Design

I loved this product so much that I bought a second one for the other side of my garage. The design is a little confusing at first but works really well once you figure it out, I didn’t even need the instructions for my second time installing it. My biggest tip is to make sure all of the nuts and bolts for the folding mechanisms are tightened enough. They come very loose to allow for easier packing and install but it is an accident waiting to happen if you don’t tighten them up after install. One negative thing, HOWEVER, strangely enough the bracket for my second set had one shorter than the other 3. I have attached pictures. This caused the arm that holds the tires to extend at an angle and would not allow the arm to sit flush with the wall mount. I have already installed the entire thing but I’m requesting an exchange and I will just remove the correct sized bracket and replace it on my mounted product. Otherwise, this tire rack has a ton of flexibility and options and can even hold my large jeep wheels (unmounted) off of the wall and has held them for over a year strong.

Scritto da: Lee

Works good

Looks good in my garage. Saves floor space.

Scritto da: Danielle

Great Tire Rack for the Money

TL;DR: Great rack for the money with some manipulation and different hardware. Drill 3/16" pilot holes. Do not use an impact to drive the bolts into your studs; you will risk shearing them. Use a ratchet/socket combo. Easy to assemble and install assuming you have the proper tools. To answer one of the biggest questions regarding tires hitting the wall: they do not. But I guess it also depends on your size tires. The wheel/tire combo I personally have on it are the factory 18" wheels from a 2018 Subaru WRX Limited with the OEM summer Dunlop 245/40R18 tires. As seen in one of my photos, there is approximately 1/2" rear wall clearance. As for the included hardware, I did not use their 3" lag bolts. I spent the extra money on 6 3/16"x4" stainless lag bolts with 12 matching washers which were approximately $20 at Lowes. I used 2 washers per bolt; 1 on the head of the bolt and 1 in between the rack and wall. These seem much more durable than the ones that came with the rack. Cheap piece of mind. As for overall quality, I'm sure there are better made racks out there for more money. The main 'gripe' I have with this rack is the inconsistency of the folding arms. When both are fully extended, the front of the rack is not 100% level. However, I can assure that the main supports that bolt to the wall are perfectly plumb and level relative to each other. I used a laser mounted level and a spirit level to confirm. The problem lies within one of the articulated arm bolt holes. The hole, either on the right or left arm, was drilled either a tad too high or too low - depending on which way you look at it. (The right side sags a tad too low or the left sits a bit too high.) To remedy this, I drilled out the right arm hole a bit larger to make room for adjustment and then re-tightened. I do not plan on folding this rack so I'm not concerned about the folding joints being tight. My OCD got the better part of me since I wasn't able to perfectly center the rack in between my garage windows because of stud location. But it worked out for the better since my garage door track would have gotten in the way anyway. Mine is mounted 78" from the floor to the bottom of the main arms to ensure adequate clearance of my big head. There is approximately 8" of clearance from the top of the tires to the ceiling.

Scritto da: R Code

Sturdy

I am using it for my 17” wheels/tires. Looks good except for the slight bow where the bottom rods join together. I also attached two eye bolts above it into the studs to run a safety cable through the wheels.

Scritto da: None

Great job unit- make sure your builder built correctly

It came nicely packaged and mostly assembled for ease of installation, which was deeply appreciated. Rock solid support bars (welded rolled steel nicly prepped for the large bolts)! The lag bolts were robust. The only issue I had was the builder of my garage apparently doesn’t know what 16” on center means. Nothing on this great piece of American engineering, made in USA product. Just took a bit more time/worry to get the lags into the inside portions of the studs… the span was about 49”. If the unit was built or had some instruction that it supports to 50” (for sloppy builders) that would have taken some worry out of the install.

Scritto da: Devin L. Cutler

Great space saver

I was concerned that this wouldn't be able to handle 4 SUV tires, as I swap out my tires seasonally. I wanted to store them in my basement off of the floor to save floor space. I shouldn't have been concerned. As long as you install on the studs inside your wall, it will hold even 4 large tires beautifully. I am very satisfied with this purchase.