0
0

Kopā:€ 0.00

Skatīt grozuIzrakstīties
LoginRegister
0

Kopā:€ 0.00

Skatīt grozuIzrakstīties
LoginRegister

InSinkErator DMG-00 Deluxe montāžas blīve, melna

Brand:InSinkErator

3.4/5

€
31.38

IOVĀCIJAS VĒSTURE IZLIETEI: mēs izgudrojām atkritumu izvešanu 1927. gadā, un mēs esam pasaulē lielākais atkritumu savākšanas iekārtu un tūlītējas karstā ūdens automātu ražotājs mājas un komerciālai lietošanai. ĀTRĀK, TĪRĀK, VIEDĀK: no ēdienreizes sagatavošanas līdz tīrīšanai, InSinkErator palīdz ātri un viegli uzturēt jūsu virtuvi tīru, izmantojot mūsu ikoniskās ierīces: atkritumu savākšanas iekārtas un karstā ūdens padeves automātus. Paredzēts, lai slāpētu likvidēšanas troksni. AMERICAS #1 DISPOSER Zīmols: Amerikas Savienotajās Valstīs ražoto InSinkErator atkritumu izvešanas iekārtu ir vairāk nekā visu citu zīmolu kopā. Visa modeļu klāsts nozīmē, ka katrai vajadzībai un budžetam ir viens piemērots. NErūsējošā tērauda modeļi: izmantošanai ar nerūsējošā tērauda slīpēšanas kamerām. REZERVES MONTĀŽA BLĪVE: Deluxe montāžas rezerves blīve ir izgatavota no elastīgas melnas gumijas un samazina atkritumu izšļakstīšanos lietošanas laikā. Mūsu Quick-Lock izlietnes stiprinājums nodrošina ātru un vienkāršu blīves nomaiņu.

Summa
Pievienot grozamPērc tagad

EAN: 0050375000570

Kategorijas instrumenti un mājokļa labiekārtošana, Servisa un fitnesa piederumi, Atkritumu tvertnes un to daļas, Atkritumu tvertņu daļas,

IOVĀCIJAS VĒSTURE IZLIETEI: mēs izgudrojām atkritumu izvešanu 1927. gadā, un mēs esam pasaulē lielākais atkritumu savākšanas iekārtu un tūlītējas karstā ūdens automātu ražotājs mājas un komerciālai lietošanai. ĀTRĀK, TĪRĀK, VIEDĀK: no ēdienreizes sagatavošanas līdz tīrīšanai, InSinkErator palīdz ātri un viegli uzturēt jūsu virtuvi tīru, izmantojot mūsu ikoniskās ierīces: atkritumu savākšanas iekārtas un karstā ūdens padeves automātus. Paredzēts, lai slāpētu likvidēšanas troksni. AMERICAS #1 DISPOSER Zīmols: Amerikas Savienotajās Valstīs ražoto InSinkErator atkritumu izvešanas iekārtu ir vairāk nekā visu citu zīmolu kopā. Visa modeļu klāsts nozīmē, ka katrai vajadzībai un budžetam ir viens piemērots. NErūsējošā tērauda modeļi: izmantošanai ar nerūsējošā tērauda slīpēšanas kamerām. REZERVES MONTĀŽA BLĪVE: Deluxe montāžas rezerves blīve ir izgatavota no elastīgas melnas gumijas un samazina atkritumu izšļakstīšanos lietošanas laikā. Mūsu Quick-Lock izlietnes stiprinājums nodrošina ātru un vienkāršu blīves nomaiņu.
Brand InSinkErator
Color Black
Material Rubber
Product Dimensions 6"D x 9"W x 1"H
Size Pack of 1

3.4

13 Review
5 Star
70
4 Star
15
3 Star
6
2 Star
2
1 Star
7

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: C. Reynolds
Fits old insinkerator ProSS-4. Probably 25-30 years old
Just the perfect part to replace old and nasty gasket. I'm not a plumber. Not as hard as you might read about, but you should be comfortable with simple plumbing work under a sink. Disposer is not light, so plan for 20+ awkward pounds in a tight space. A helper is good if you can both reach in the cabinet. You can loosen the attachment bracket quite a bit and easily control when the unit drops (see Insinkerator instructions - it's a good design). Have a foot long 2x4 flat on the cabinet bottom because the electric wire goes in the bottom and unit will not sit upright if wire is pinched (not good for the wire either). Turn off circuit breaker. My thoughts: 1 ensure enough slack in the wires to ease the unit down to the bottom of the cabinet. 2 disconnect and drain dishwasher hose--you need a small bucket/pan--and secure the hose out of the way 3 remove screw and work loose the black elbow between the unit and the waste pipe (black elbow on the left, aiming down in the pic). Also loosen the slip joint (white) nut it goes into. The elbow was a bit hard to get out of the drain port given close clearances here. Clean the rubber gasket on the end of the black elbow--some people get a new rubber gasket but I didn't. 4 clean the unit's drain port seat/sealing area very carefully, but don't scratch the metal. I did this before dropping the unit because it's easier when still attached and not wobbly. 5 disconnect the unit from the bracket holding the unit to the sink and ease it to the 2x4, but not on the power cord 6 the gasket is easy to swap out: no sealant etc. Pull out the old one and new one snaps right on. 7 Lift unit back up - it's a bit tricky to get it to catch in the bracket. Tighten it a little so the unit won't fall. Then you can wiggle the unit and get the black elbow and screw in place and into the slip joint. My port is old and pitted so I put a very small bead of plumbers putty--think spaghetti diameter--in the sealing seat on reassembly, and a little silicone sealant in the slipjoint. I didn't tighten the slip joint until later because the unit is lifted up a bit as the bracket is tightened. 8 Make sure it's all hooked up and give it a try. I leave the little bucket under the fittings for a few days to be sure no leaks! 9 keep the new gasket packaging under the sink because you will have to redo this in a few years. It's handy to know exactly what to order
Scritto da: David L. Stapf
First one I ordered did not fit. This one did.
They don’t clearly mention model numbers. That would be helpful. I couldn’t get this one to work at first. The twist lock couldn’t get started as this was too thick. I noticed about an eighth inch lip on the inside. I slit that off with xacto knife and it went back together in one minute
Scritto da: Chris Pollock
Not as pictured.
Replacement gasket seemed a bit bigger making install harder and it didn’t have the rubber trim stripe on flaps like picture and the one I was replacing. Returning but not sure if they have the one as pictured.
Scritto da: T
Fits great!
The old gasket on my garbage disposal was stained and worn out, so after a bit of effort, I was able to track down this new part! For anyone attempting the same thing, the DMG-00 is the proper gasket for an Emerson E120. No leaks and a relatively simple installation, but be aware that you'll be disconnecting the disposal and dropping it down off the sink to replace the gasket ???? I used a 3-ton car jack and a 2x4 to hold it in place ????
Scritto da: jae h.
average quality
It's a decent level for the price.
Scritto da: Paul D. Siverling
Perfect fit.
Fixed the leak and splash back.And was easy to install.Works like factory.
Scritto da: Bob Loeser Sr
Amazon listing description is incorrect between the two listed for insinkrestor
Well in The Amazon listing it say that the ribbed unit is for the higher HP units and the unribbed unit is for the lower HO units. The reverse is true if you read the mfg packaging label !
Scritto da: Greg Gorton
Perfect fit
Iit was somewhat difficult to locate this part on Amazon for my InSinkErator 555-SS garbage disposer. But once located, it was competitively priced, shipped fast and fit perfectly. The most difficult part is disconnecting all the drain piping and lifting this 3/4 HP disposer back up to the sink. The original mounting gasket lasted 20 years and since this is an OEM replacement, I expect it will do the same.
Scritto da: Steven J.
Easy to replace
Fit our Badger 5 without issue and was easy to change out with the cracked original. Seems like an OEM item.
Scritto da: Df
Works a fits like it should
It’s was cheaper then I could find anywhere, and it is the correct insinkerator part It works and fits perfectly
Scritto da: Amazon Customer
Perfect replacement Gasket
Fit my InSinkErator 777 perfectly. Good value.
Scritto da: Ryan larose
Good
Fit on my older Kenmore garberator. Seems a little thin rubber than the original. Happy with it
Scritto da: Pee Bow
Fits great!
Fits insinkerator brand disposal even 20 year old models

Saistītie produkti

hot
Westbrass ASB-26 apglabāšanas gaisa slēdzis un vienas izejas vadības kārba, pulēts hroms, 1 pack pulēts hroms
3.6/5

€ 115.00

Westbrass ASB-26 apglabāšanas gaisa slēdzis un vienas izejas vadības kārba, pulēts hroms, 1 pack pulēts hroms
3.6/5

€ 115.00

hot
Westbrass ASB-B3-05 izlietnes augšdaļa, atkritumu apglabāšanas nomaiņa gaisa slēdzis, tikai apdare, skalošanas poga, pulēts niķelis
3.5/5

€ 75.62

Westbrass ASB-B3-05 izlietnes augšdaļa, atkritumu apglabāšanas nomaiņa gaisa slēdzis, tikai apdare, skalošanas poga, pulēts niķelis
3.5/5

€ 75.62

hot
Insinkerator 12506 standarta izlietnes atloka komplekts, 5
4.1/5

€ 604.23

Insinkerator 12506 standarta izlietnes atloka komplekts, 5
4.1/5

€ 604.23

hot
Gourmetier KADK21AB Kingston Trimscape divu izvadu atkritumu izvadīšanas gaisa slēdža komplekts, antīks misiņš
0.1/5

€ 196.62

Gourmetier KADK21AB Kingston Trimscape divu izvadu atkritumu izvadīšanas gaisa slēdža komplekts, antīks misiņš
0.1/5

€ 196.62

hot
InSinkErator SMG-00 standarta montāžas blīve, melna
3.6/5

€ 29.33

InSinkErator SMG-00 standarta montāžas blīve, melna
3.6/5

€ 29.33

hot
InSinkErator SilverSaver izlietnes aizbāznis, pulēts nerūsējošais tērauds, STP-DS
3.7/5

€ 45.41

InSinkErator SilverSaver izlietnes aizbāznis, pulēts nerūsējošais tērauds, STP-DS
3.7/5

€ 45.41

hot
Sink Erator Division 5166 fiksators — nomaiņa
4/5

€ 24.96

Sink Erator Division 5166 fiksators — nomaiņa
4/5

€ 24.96

hot
DANCO Disposal Genie Atkritumu izmešanas sietiņš
3.8/5

€ 38.28

DANCO Disposal Genie Atkritumu izmešanas sietiņš
3.8/5

€ 38.28

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array

Kopā:€ 0.00

Skatīt grozuIzrakstīties

Kategorijas

Visas kategorijas
Izvēlne Kategorijas Netālu Ratiņi

Menu