Jonard Tools WTL-12, sienas kastes veidne un līmenis vecām darba elektriskajām kārbām, zilas sienas veidnes līmenis vecām darba kastēm

Name: Jonard Tools WTL-12, sienas kastes veidne un līmenis vecām darba elektriskajām kārbām, zilas sienas veidnes līmenis vecām darba kastēm
Brand: JONARD TOOLS
SKU: 0811490017641
Price: 43.04 EUR
Availability: InStock

Brand:JONARD TOOLS

3.8/5

€
43.04

Jonard Tools WTL-12 sienas kastes veidne un līmenis ir īpaši izstrādāts vienas un divu grupu veco darba kastu izgriešanai. Sienas veidņu izlīdzinātājs ir lieliski piemērots, lai nodrošinātu, ka kastes vienmēr ir līdzenas. Šim sienas veidņu līmenim ir šādas funkcijas: iebūvētie līmeņi palīdz ideāli novietot veidni, platas aizsargājošas gumijas sloksnes notur veidni vietā un novērš sienas skrāpējumus, darbojas ar Carlon B114R un B12R vienas grupas kastēm, Carlon B225R dubultajām kastēm, Carlon SC100RR zemsprieguma plāksnes, Arlington Industries LVL1 un LVL2 kastes, kā arī daudzu citu zīmolu vienas un divu grupu kastes, kā arī pievienoti skrūvju caurumi, lai noturētu to vietā brīvroku lietošanai. Vienas bandas izgriezuma izmēri: 2 1/4” x 3 5/8”, dubultās bandas izgriezuma izmēri: 4” x 3 5/8”.

Summa

Pievienot grozam Pērc tagad

EAN: 0811490017641

Kategorijas instrumenti un mājokļa labiekārtošana, Elektroinstrumenti un rokas darbarīki, Elektroinstrumentu daļas un piederumi, Svārstāmo instrumentu piederumi, Lāpstiņas,

UNIVERSĀLĀ SADERĪBA: Darbojas ar Carlon B114R & B12R vienas grupas kastēm, Carlon B225R dubultajām kastēm, Carlon SC100RR zemsprieguma plāksnēm, Arlington Industries LVL1 un LVL2 kastēm un daudzu citu zīmolu vienvietīgām un dubultām kastēm. ĒRTA FUNKCIJA: pievienoti skrūvju caurumi, lai noturētu to vietā brīvroku lietošanai. DROŠA DARBĪBA: platas aizsargājošas gumijas sloksnes notur veidni vietā un novērš sienas skrāpējumus. PRECĪZS LĪMENIS: iebūvētie līmeņi palīdz perfekti novietot veidni un nodrošināt, ka kastes vienmēr ir vienā līmenī. DAUDZĪBA LIETOŠANA: Paredzēts gan vienas, gan divu grupu vecām darba kastēm horizontālai un vertikālai montāžai.

Country of Origin	China
Item model number	WTL-12
Manufacturer	Jonard Tools
Product Dimensions	0.84 x 4 x 3.63 inches; 0.01 Ounces

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Tony honeycutt

Great product just one thing

They gave us a hole for top center but not side center . I was using the level at first and seen it was not center. So after drilling a hole on side it’s now a must have tool . Ty

Scritto da: Zane

Electrician must have

Use this all-most every day for work. EVERY electrician must have one. Thank me later

Scritto da: James J. Pijor

This thing is awesome.

I’m removing all of the “self contained” receptacles and switches from our manufactured home and replacing them with real stuff which includes all the boxes. The bubble is accurate and is a time saver.

Scritto da: Brandon Hann

Works perfectly!

Of course I would buy this only AFTER doing a bunch of outlet installs! This takes all the guess work out of measuring hole sizes and making sure they're level. It's one of those simple tools that just works and makes the job so much faster than doing it manually.

Scritto da: LA-OM

Easy to use - gets you 98% of the way there

This works really well for PVC old work boxes and low-voltage mud rings. It's not quite right for fiberglass old work boxes, but you just need to add a millimeter or two when cutting to fit a fiberglass box. The little level has saved me a bunch! Worth keeping in your bag if you install a lot of cut in boxes.

Scritto da: Buyer

Great product!

This is a great product at a cheap price can beat it good but ????

Scritto da: Wade Crawford

Old Work Installation Hero

I don't do a lot of installation in new construction so this allows me to do very easy installation of Network Drops and have them level and not having to worry about having any hole visible when a faceplate is installed. Good for double boxes as well, typically not used in my scope of work but have used it a few times for double-gang installations that need a 4x4 or similar high volume connection for a small space.

Scritto da: Dean R Berman Jr

Just a few mm too small for high voltage old work boxes

The size of these are just a hair too small to fit high voltage old work boxes. I used the 2-gange and the 1-gang, and when I put the work box in place, it didn't fit. When I gave it a little force, it popped the back of the drywall through and made my 1-gang about 1.5in too large. I had to put in my own backer for it. The width seems to be "snug", but the height isn't right, this needs to be taller by at least 6mm in total. Not a complete loss, but I am pretty disappointed with it.

Scritto da: P G

Worth the money!

This template ended up making a bigger difference than I thought it would! It was so easy to use it was worth the money. Even for just one project! We moved into an older house. We wanted to install a hardwire network so that we're not relying entirely on WiFi. Not only does this template make it easier to create level gang holes in a wall, it became very useful while planning where those cutouts should be! This made the process easier throughout the project.

Scritto da: Mark Adams

Fantastic, saved me a lot of time.

I just used this for the first time on a big job. Used it to level and cut a lot of low voltage boxes for cat 6 cable runs. Let me tell you, this saved me a lot of time over my old methods of tracing boxes using a small hand level. What a great little tool, I am very glad i picked it up. The low gang boxes also fit a lot better than the tracing I used to do using the box. Fantastic little item. Will be using it again on future installs.

Scritto da: David

Do the job

Precise