Klein Tools 80049 HVAC rīku komplekts ar trīs vienā kabatas skrūvgriezi, 8-in-1 skrūvgriezi/uzgriežņu piegriezni un digitālo kabatas termometru, 3 gabali

Name: Klein Tools 80049 HVAC rīku komplekts ar trīs vienā kabatas skrūvgriezi, 8-in-1 skrūvgriezi/uzgriežņu piegriezni un digitālo kabatas termometru, 3 gabali
Brand: Klein Tools
SKU: 0092644800498
Price: 94.79 EUR
Availability: InStock

Brand:Klein Tools

3.9/5

€
94.79

Šajā trīsdaļīgajā Klein Tools HVAC komplektā ir viss nepieciešamais profesionālim. Pocket 3-in-1 HVAC skrūvgriezim ir noslēpjams uzgalis un kabatas klipsis ērtai kabatas glabāšanai. 8-in-1 HVAC bīdāmajam skrūvgriezim/uzgriežņu dzinam ir unikāla, patentēta galva, kas slīd uz priekšu un atpakaļ, lai pārslēgtos no 1/4 collas uz 5/16 collu magnētisko sešstūra galvas skrūvgriezi. Digitālais termometrs ņem apkārtējās vides un tiešā kontakta rādījumus gan Fārenheita, gan Celsija skalās. Vairāk nekā 160 gadus uzņēmums Klein Tools ir ražojis augstākās kvalitātes, profesionālas kvalitātes rokas instrumentus, kas nodrošina veiktspēju, izturību un precizitāti, kas nepieciešama pareizai darba veikšanai. Mūsu inženieru, strādnieku un amatnieku ģimene turpina likt lietā sešu paaudžu pieredzi katrā mūsu radītajā rīkā, izmantojot tikai augstākās kvalitātes materiālus, izcilu meistarību un turot ražošanu pēc iespējas tuvāk mājām. Kleins nav tikai mūsu uzņēmuma es, tas esmu arī mūsu ģimenes es. Un tā kā mēs esam amerikāņu uzņēmums, kas pieder ģimenei un kuru pārvalda ģimene, jūs zināt, ka varat paļauties uz to, ka būsim šeit rīt. Klein Tools ražo ne tikai lieliskus produktus, bet arī lieliskus produktus, kas atbilst to profesionāļu prasībām, kuri tos izmanto katru dienu... Kopš 1857. gada.

Summa

Pievienot grozam Pērc tagad

EAN: 0092644800498

Kategorijas instrumenti un mājokļa labiekārtošana, Elektroinstrumenti un rokas darbarīki, rokas darbarīki, skrūvgrieži, Askrūvgrieži un uzgriežņu skrūvgrieži,

VAIRĀKI UN IZMĒRI - ietver 2 dobus uzgriežņu uzgriežņus un vairākus skrūvgriežu uzgaļus. HVAC SLIDE DRIVE 8-in1 vairāku bitu skrūvgriezis/uzgriežņu draiveris. GROZĒJOŠS VĀRZIS optimālai un precīzai vadībai. VAIRĀKI PADOMI VIENĀ ietver #0 Phillips, 1/8 collas (3,2 mm) rievojumu un Schrader uzgali. VIEGLA UZGLABĀŠANA KABATĀ ar noslēpjamiem uzgaļiem un kabatas klipsi.

Batteries Included?	‎Yes
Battery Cell Type	‎Alkaline
Brand	Klein Tools
Color	Silver, Black, Orange, Green
Color	‎Silver, Black, Orange, Green
Country of Origin	‎China
Customer Reviews	4.8 4.8 out of 5 stars 2,154 ratings 4.8 out of 5 stars
Head Style	Flat, Phillips, Hex
Head Style	‎Flat, Phillips, Hex
Item Dimensions LxWxH	15 x 10 x 3 inches
Item model number	‎80049
Item Package Quantity	‎1
Item Weight	‎6.3 ounces
Manufacturer	‎Klein Tools
Part Number	‎80049
Pattern	‎Nut Drivers
Product Dimensions	‎15 x 10 x 3 inches
Style	‎Kit

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Amazon Customer

Great quality

I loved the combo deal and the quality of the tools

Scritto da: Omar Jasso

Best screwdriver I ever owned

I work in maintenance and I use this tool almost daily. If you work with AC or just want a really good screwdriver with multiple attachments this is a must buy

Scritto da: John

Handy tool for HVAC

The flat blade is the right size for ground lugs and not to small for contactor lugs on condensing units. The Phillips is the right size for 24v connections. The 1/4 - 5/16 is pretty handy.

Scritto da: Crystal Plunkett

Was happy with tool not missing bit!!!!

I ordered this for my husband for work and he was so glad he needed one but when it says 8 in 1 and you get the interchangeable bit which is great but when it came the bit was missing which was disappointing. Other than that my husband said it was a great tool is why we gave a higher rating.

Scritto da: Rocky Mountain Tradesman

HVAC 8-in-1, purdy good, BUT NOT PERFECT!

This is one of those tools that could have been perfect, but it's not. Still pretty good, (4/5), and my current everyday favorite for work. -Klein, next time just license the Malco flip bit. It is a real pain in the butt to clean the bits of metal and rust out of the 1/4" to 5/16" - you know, the bits of metal that are EVERYWHERE when doing HVAC work... the thing you made the tool for... -I like it better than the Lennox 6 in 1, the Klein doesn't seem to rust up 14 seconds after water is within 37 feet of the tool. -The bit tips don't seem to magnetize as easily either, not sure who came up with that dumb idea that 6 whole electricians on earth use. -It fits in my service pouch pocket, which sounds like a derpy feature until you lose a tool somewhere in the middle of a 250 unit PM and have to stop yourself from exploding in the middle of some poor guys mechanical closet. -Works good in my hands, it's got a good medium size handle, I got square shaped medium sized mits, covered with a good squishy top layer and it doesn't look like it'll break any time soon.

Scritto da: William Vanderhoff

So happy with it

Great product so happy with it I bought 2

Scritto da: Jason L

Great Klein tool.

This is an excellent tool for anyone to have in the HVAC field. It is very handy to have a magnetic 5/16 and 1/4 hex driver. The valve core removal tool is also very handy as well. The other side of the core removal tool is a thermostat screw driver flathead. The Phillips and flathead bit works with every breaker or contactor I’ve had to change or tighten the connections. There is also a 3/8 driver if you remove the bit set sleeve. Made of good steel and fairly rust resistant. Fits in your tool bag but is more convenient to carry in your pocket. Not too bulky and has somewhat decent grip until you get refrigerant oil on your hand then it becomes slippery as most hand tools do. Great purchase. Highly recommended.

Scritto da: Robin Johnson

Works

Use it every day

Scritto da: S Sumner

All i need in 1

Best screwdriver i have ever had. it is pricey and would be better if it was insulated (just to be on the safe side) but as a HVAC engineer this is great

Scritto da: Richard

Absolute must have

Bought this back when I was in HVAC/R school and now I’m working in the field. It’s easily one of my most used tools. The 1/4“ and 5/16” magnetic nut driver feature alone was good for me, but the extras also come in very handy. If you’re looking to cut down on having many individual tools in your bag you absolutely need this.

Scritto da: Shana

Perfect multitool

I bought this for my boyfriend who had been looking for a multitool for awhile. He's an HVAC technician and needed a tool with a Schrader bit but couldn't find anything. He used this tool everyday during the summer and is using it as a regular screwdriver now that it's cold

Scritto da: Considerate

Quality tool with extra bit for removing or installing valves Well serves the purpose used in work having all bits in one tool

Scritto da: Drew.pancoast@hotmail.ca

Magnetic 14” and 5/16

I’ve had this screw driver for a couple years now. I’m a journeyman hvac/r tech of 28 years. I carry this a crescent wrench and meter and I can diagnose most anything. It’s a durable screwdriver. I had to get a new one because mine was stolen by the lil tool ferries.