0
0

Kopā:€ 0.00

Skatīt grozuIzrakstīties
LoginRegister
0

Kopā:€ 0.00

Skatīt grozuIzrakstīties
LoginRegister

Mazas detaļas 18-8 nerūsējošā tērauda pilnībā vītņots stienis, 3/8-16 vītnes izmērs, 36 garums, labās puses vītnes

Brand:Small Parts

3.8/5

€
30.07

Šis pilnībā vītņots stienis ir izgatavots no 18–8 nerūsējošā tērauda, ​​lai nodrošinātu izturību pret koroziju, tam ir 3/8–16 labās puses vītnes, un tas ir 36 garš. Vītņotie stieņi un tapas ir stiprinājumi, kas ieskrūvē vītņotos uzgriežņos vai caurumos, kas ļauj tos salikt. komponentiem. Atšķirība starp stieņiem un radzēm ir garums: parasti radze ir līdz 1 pēdu garš, un stienis ir vairāk nekā 1 pēda garš. Abiem ir vītnes daļēji vai visā garumā. Tiem, kuriem ir daļēji vītne, vienā vai abos galos ir vienāds vai nevienāds vītnes garums. Kniedes ir pieejamas arī ar perforētu pamatni, metinājuma izvirzījumiem vai iespiežamu fiksatoru, lai nostiprinātu pie detaļas virsmas.

Summa
Pievienot grozamPērc tagad

EAN:

Kategorijas Industriālie un zinātniskie priekšmeti, vītnes, Skrūves un stiprinājumi, Griezes stieņi un tapskrūves, Pilnīgi vītņotie stieņi un tapskrūves,

Izgatavots no 18-8 nerūsējošā tērauda, ​​kas nodrošina izturību pret koroziju. Pilnībā vītņots stienis.
Country of Origin China
Grade Rating 18-8
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 36 x 0.38 x 0.38 inches
Item model number B00G3PEUD4
Manufacturer Small Parts
Material Stainless Steel
Product Dimensions 36 x 0.38 x 0.38 inches; 14.4 Ounces
Thread Coverage Fully Threaded
Thread Size 3/8"-16

3.8

9 Review
5 Star
84
4 Star
10
3 Star
4
2 Star
0
1 Star
1

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: islandlady
Works fine
I wish I could say what this was for, but it was a tool my husband needed. It worked and did the job just fine.
Scritto da: the reviewer
Wow, this stuff is strong. Not brittle . Clean, no redsidual machining oil. Real Stainless
18-8 thread, stainless steel rod. Wow this is much better quality than I was expecting. I tend to use a bit of stainless steel for my projects. Have blades for my reciprocating saw ( Saws All ) designed to cut Stainless steel. This rod is such high quality, when cutting to length for my project, it took two of those blades to cut through the threaded rod ( not unusual when dealing with the good stuff ). The threads are cut from end to end. Ends are machined smooth. Threads are true to size. No slop in nuts, as if cut if between SAE and Metric, these are EXACTLY cut to 18-8 nice and tight. Had a piece left over. Tried to bend it. Took some effort. Rod bent, did not break. Wow ... over kill for my project. Thinking will last well over 100 yrs. Threads will stay clean and completely usable. NOTE *** with Stainless steel, the edges of threads may gall ( bend over ), use milk of magnesium ( yes same stuff one might use for upset stomach) , or anti sieze, on your threads, bolts and nuts. Turn the bolts slowly and make sure are not cross threading. This is with EVERY stainless steel bolt, screw, nuts. If threads ( ramps ) on bolt gall, they will cause the nut to bind, maybe midway to being fully tightened, especially with low grade stainless steel products from Big Box hardware stores. Use a dry lube or anti seize .. look on line for more info.
Scritto da: Tony
Great
Very good for the money. I did have a very minor imperfection in the thread. Could have been knocked around, and not an actual defect. Overall, I am very happy with it, a much better deal than the local big box hardware store.
Scritto da: Rick
Quality
Bought these to make replacement studs on my outboard motor restoration, worked great and won't have to worry about corrosion.
Scritto da: SteveO
Nice part
good buy
Scritto da: Pamela Pierce
Exactly as specified.
I went to the local hardware and bought nuts for this rod and the nuts fit without any problem, so I'd say the threaded rod is well made and good for use with standard nuts in USA - 3/8" - 16 nuts. I cut the rod with my angle grinder, no problem. I like the fact that the rods are stainless steel. A quality product.
Scritto da: DMD
Worked well.
Worked well. Did the job. Price was good.
Scritto da: Pete
solved the problem
These are bright stainless steel, reasonably priced, and I don't have to buy 20'.
Scritto da: Anoop Dwivedi
perfect threaded bar for stable setups
I have a telescope mount that fits on a photo tripod using a 3/8" stud but stud was too short and when used with a pier it wont work. I was looking for a longer 15-18" threaded bar but couldnt find any. This seems like the closest fit. it work on my setup like a charm. I am able to fit this from the bottom of the mount, through the 21" pier into the mount base. I havent figured out what to do with extra 18" length but probably I will cut it in half and use both on different setups. The bar is made up of steel and looks and feels very strong and well made.

Saistītie produkti

hot
Lamons THRROD.LOW.1/2-13x6inx20 zemas stiprības tērauda vītņots stienis, 1/2-13 vītnes izmērs, 6 garš (daudzums 20 katrā)
0.1/5

€ 58.10

Lamons THRROD.LOW.1/2-13x6inx20 zemas stiprības tērauda vītņots stienis, 1/2-13 vītnes izmērs, 6 garš (daudzums 20 katrā)
0.1/5

€ 58.10

hot
Mazas detaļas vītņota tapa, 303 nerūsējošais tērauds, #6-32 vītnes, 1/2 x 7/32 vītņoti garumi, 1 kopējais garums 1 colla 1/2 x 7/32 collas #6-32 1
3/5

€ 28.02

Mazas detaļas vītņota tapa, 303 nerūsējošais tērauds, #6-32 vītnes, 1/2 x 7/32 vītņoti garumi, 1 kopējais garums 1 colla 1/2 x 7/32 collas #6-32 1
3/5

€ 28.02

hot
The Hillman Group 44833 5/8-11 x 3 collu vītņots stienis, 3 iepakojumi
0.1/5

€ 12.71

The Hillman Group 44833 5/8-11 x 3 collu vītņots stienis, 3 iepakojumi
0.1/5

€ 12.71

hot
Zemas stiprības tērauda vītņots stienis, vītnes izmērs 5/8-11, 4 gari (daudzums 20 katrā)
0.1/5

€ 58.77

Zemas stiprības tērauda vītņots stienis, vītnes izmērs 5/8-11, 4 gari (daudzums 20 katrā)
0.1/5

€ 58.77

hot
uxcell a15113000ux1861 1,25 mm solis M8 x 50 mm vītne ar visu vītni, bronzas tonis (6 pakojumā)
3.5/5

€ 30.15

uxcell a15113000ux1861 1,25 mm solis M8 x 50 mm vītne ar visu vītni, bronzas tonis (6 pakojumā)
3.5/5

€ 30.15

hot
Oglekļa tērauda tapa, galos ir vienādi vītņoti, melnā oksīda apdare, M6-1,0 vītnes, 110 mm garums, 31 mm vītnes garums, ražots ASV (2 iepakojumā) 110 milimetri 31 milimetri M6 x 1 2
4/5

€ 30.53

Oglekļa tērauda tapa, galos ir vienādi vītņoti, melnā oksīda apdare, M6-1,0 vītnes, 110 mm garums, 31 mm vītnes garums, ražots ASV (2 iepakojumā) 110 milimetri 31 milimetri M6 x 1 2
4/5

€ 30.53

hot
Metriski regulējams lietie cinka rokturis, S/S vītņota tapa, garums 78 mm, augstums 55 mm, vītne M10 x 1,5 mm, vītnes garums 45 mm (1 iepakojumā) M10-45
0.1/5

€ 42.55

Metriski regulējams lietie cinka rokturis, S/S vītņota tapa, garums 78 mm, augstums 55 mm, vītne M10 x 1,5 mm, vītnes garums 45 mm (1 iepakojumā) M10-45
0.1/5

€ 42.55

hot
Prime-Line B 610 atsperes spriegojuma rullīšu komplekts, 1 collas ārējais diametrs, ieliekta mala, tērauda lodīšu gultnis
3.5/5

€ 28.90

Prime-Line B 610 atsperes spriegojuma rullīšu komplekts, 1 collas ārējais diametrs, ieliekta mala, tērauda lodīšu gultnis
3.5/5

€ 28.90

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array

Kopā:€ 0.00

Skatīt grozuIzrakstīties

Kategorijas

Visas kategorijas
Izvēlne Kategorijas Netālu Ratiņi

Menu