Mazas detaļas 18-8 nerūsējošā tērauda plakanā paplāksne, vienkārša apdare, atbilst ANSI B18.22.1, 5/16 caurumu izmērs, 11/32 ID, 11/16 OD, 0,065 nominālais biezums (100 iepakojumā) 5/326 collas 11/ 0,875 collas 0,065 collas 100

Brand:Small Parts

3.5/5

29.31

18-8 nerūsējošā tērauda plakanajai paplāksnei ir vienkārša apdare, un tā atbilst Amerikas Nacionālā standartu institūta ANSI B18.22.1 specifikācijām. Plakanā paplāksne nodrošina nesošo virsmu stiprinājuma slodzes sadalei vai tiek izmantota kā starplikas starp sastāvdaļām. 18-8 nerūsējošā tērauda materiāls nodrošina izturību un nodrošina labu izturību pret koroziju daudzās vidēs. Materiāls var būt nedaudz magnētisks. Paplāksnes sadala stiprinājuma slodzi pa virsmu, un tās var izmantot arī kā starplikas, atsperes, starplikas vai bloķēšanas ierīces. Vairāki dažādi paplāksnes stili atbilst dažādām pielietojuma un uzstādīšanas prasībām. Visizplatītākais stils ir plakana paplāksne. Papildu priekšrocības sniedz specializētākas paplāksnes. Piemēram, krūzes paplāksne palīdz aizsargāt stiprinājumus no elektriskās strāvas, savukārt bloķēšanas paplāksne nodrošina papildu drošību samontētā sagatavē.

Atbilst ANSI B18.22.1 specifikācijām. Vienkāršai virsmai nav apdares. 18-8 nerūsējošais tērauds nodrošina labu izturību pret koroziju un izturību. Plakanā paplāksne nodrošina nesošo virsmu stiprinājuma slodzes sadalei vai darbojas kā starplikas.
Country of Origin China
Domestic Shipping Item can be shipped within U.S.
Exterior Finish Plain
Fastener Size 5/16"
International Shipping This item can be shipped to select countries outside of the U.S.
Manufacturer Small Parts
Material Stainless Steel
Outside Diameter 0.88 Inches
Package Dimensions 3.75 x 3.75 x 1.75 inches; 0.01 Ounces
Washer Type Flat

3.5

13 Review
5 Star
68
4 Star
17
3 Star
9
2 Star
4
1 Star
2

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: saggman54
as advertised
ordered #4 and they were the size that was listed. I saw some complaints, so I was a bit worried the size would not be exact. but the ones I received were the exact size as listed .125 x .312 x .032 using to back up pop rivets. perfect size. had to wiggle to get on, which is what I was looking for.
Scritto da: RAY RAGUSA
Incorrect sizeing
The washer itself is good however it is sized incorrectly.The od is 1/8 larger than indicated not much but in close tolerance situations not acceptable.
Scritto da: MeccanoManStan
They space between the gas can and cover.
Add rubber washer (https://smile.amazon.com/dp/B00JJXMJLC?psc=1&ref=ppx_yo2_dt_b_product_details) and some totally not-fitting replacement caps ( EONLION Gas Can Replacement Spout Kit, Flexible Pour Nozzle with Gasket, Stopper Caps, Collar Caps, Stripe Cap, Spout Kit for Water Jugs and Old Can, 6 Pack ) actually can be made to work. These are https://smile.amazon.com/dp/B009OJEA2M?psc=1&ref=ppx_yo2_dt_b_product_details. LIJ
Scritto da: DCMill
Inconsistant size & material quality/make-up is questionable...
I ordered these washers to use as backing for 1/8" pop rivets. Some fit very tightly & some did not fit at all, (too small on ID). While it was not critical for my application, the product description states that these are made of stainless steel, & therefor should be non-magnetic, This was not so as they were easily attracted to a refrigerator magnet. It is possible that these washers are made from steel with a very low alloy content & thus while technically qualifying as stainless steel, are still magnetic. As I stated previously, my current application for these washers does not require corrosion resistance or non-magnetic properties that one would expect from a stainless steel product, however I do expect products which I purchase to be as described & this product was not. Based on the needs of my project, I was satisfied with this purchase as it was adequate for my current needs, however I am disappointed in the quality of the product I received & would definitely check other sources if purchasing this product again.
Scritto da: User7601
Excellent washers. Would buy again.
I like these washers. Nice.
Scritto da: Daniel
Size not accurate
Od of washers recieved were smaller than description
Scritto da: M. Kettler
It's a washer. But handy to get the right part delivered.
Look, they're just washers. They meet their specified size, and are stainless. The stainless is non-magnet reactive, which is how it should be with 18-8. That said, the 2 local stores I checked don't carry this size in stainless steel. I needed stainless for a food-contact application, and a larger size just wouldn't fit. Getting this part delivered via prime to my door without having to hunt all the local stores was worth the price-markup and being forced to buy 5.
Scritto da: Richard N Cartwright
Stainless steel flat washer
Exactly as advertised.
Scritto da: Jeremy Porter
Hard to find these locally. Used to add a drain to a wooden deck cooler.
I used these to help with adding a drain to an outdoor wooden deck cooler. The inside is just a normal plastic cooler and these washers fit the hole with my fittings perfectly. It's hard to find stainless washers like this anywhere locally so I paid more than I think they are worth on Amazon.
Scritto da: kelvin s.
Not Stainless steel, totally magnetic
These Washers are totally magnetic, not Stainless steel. Not worth the return process. I will through these in a bin and go find real Stainless steel Washers. Waste of 13$ and 1 week shipping
Scritto da: Colleen
Pricey but I needed it.
The only place I could find this item in the time needed.
Scritto da: John Bender
Did the job
I liked the product because I was able to repair my snowblower
Scritto da: mike boardman
Doesn't do tricks.
Well it's a washer, an expensive washer but I needed it asap and it did it's job.

Saistītie produkti

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array