Moen 100255 divu rokturu novirzītāju servisa komplekts

Name: Moen 100255 divu rokturu novirzītāju servisa komplekts
Brand: Moen
SKU: 0026508095997
Price: 52.57 EUR
Availability: InStock

Brand:Moen

2.7/5

€
52.57

PRODUKTA APRAKSTS Kā vadošais jaucējkrānu zīmols Ziemeļamerikā, Moen piedāvā daudzveidīgu pārdomāti izstrādātu virtuves un vannas jaucējkrānu, dušas galviņu, aksesuāru, vannas drošības produktu un virtuves izlietņu izvēli dzīvojamajām un komerciālajām vajadzībām, nodrošinot vislabāko iespējamo jēgpilnu inovāciju kombināciju. noderīgas funkcijas un paliekoša vērtība. NO RAŽOTĀJA Moen rezerves daļa; 100255. Daļas numurs 100255 ir divu rokturu novirzītāja servisa komplekts. Servisa komplekts Divu caurumu virtuves Moen rezerves daļai. Servisa komplekts. Divu caurumu virtuvei. Moen rezerves daļa.

Summa

Pievienot grozam Pērc tagad

EAN: 0026508095997

Kategorijas instrumenti un mājokļa labiekārtošana, Servisa un fitnesa piederumi, Vārsti, Diverteru vārsti,

Izcelsmes valsts: Ķīna. Oriģināls Moen aparatūras komplekts virtuves jaucējkrāniem. Kas ir kastē: divu rokturu jaucējkrāna novirzītājs un gumijas paplāksne. Divertora komplekts ir savietojams ar lielāko daļu Moen divu rokturu novirzīšanas virtuves jaucējkrānu.

Batteries Required?	‎No
Color	‎Unfinished
Country of Origin	‎China
Customer Reviews	3.7 3.7 out of 5 stars 21 ratings 3.7 out of 5 stars
Domestic Shipping	Item can be shipped within U.S.
Finish	‎No Finish
Included Components	‎Bathroom Sink Faucet Replacement Parts, Bath Faucets and Accessories
International Shipping	This item can be shipped to select countries outside of the U.S. Learn More
Is Discontinued By Manufacturer	‎No
Item model number	‎100255
Item Package Quantity	‎1
Item Weight	‎1.44 ounces
Manufacturer	‎Moen Incorporated
Material	‎Rubber
Part Number	‎100255
Product Dimensions	‎2 x 0.5 x 0.5 inches

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Roll Tide

Kept for later use

Came one week after it was supposed to. The plumber had already gone by then!

Scritto da: Richard Wrede

does not work

I've tried two of these, none work! they are not made correctly, if you install it as per instructions nothing comes out the sprayer hose, the brass plunger is bound up inside. a workaround had to be made by screwing it in setting the bottom washer, then back it out a few turns so the water bypasses the lower washer. this gats a fairly decent spray but water still comes out the faucet and sprayer.

Scritto da: adam81

works great

The old diverter was difficult to remove. There is a hex bolt provided with the new diverter to be used as the removal tool of the old diverter. You need to use the hex part of the bolt as kind of a large Allen wrench. I couldn't get enough leverage only using pliers, so I just put the hex bolt directly in my cordless drill and unscrewed the old diverter that way. After the old diverter was removed, installation was easy and my side sprayer now works again!

Scritto da: Ronald R Yadeskie

good deal

Scritto da: Charles M. Moughamian

Fit great

Installed very easy and did the job

Scritto da: Daisymommy

Doesn’t divert the water to only come out the sprayer

This is the third diverter I have purchased. And none of them fixed the issue. The faucet and sprayer have water coming out of them when I use the sprayer.

Scritto da: Norman Edman

Five Stars

good

Scritto da: Mike in PA

OEM Diverter for a Sprayer Fix

I was in need of a diverted on my Moen Faucet, as I had some thumping, leaking and squealing coming from my faucet. It turned out to be mainly a sprayer head issue, but replacing the diverter also helped, as I checked the repair in stages. This was a direct Moen part and fit without issue. I don't like their design where you have to insert a bolt head into the diverter to replace and insert it, but that's something I can't control. Just be wary of how the head is inserted and that it's not tilted to one side. You can easily strip the hex shape if you're not careful. A bit of a tip is to find 2 nuts that fit the threads. I think they were 3/8" X 16. Instead of using pliers to grab the bolt shift, jam the 2 nuts together on the threaded end. By doing this, the nuts and bolt are can be turned as a single unit. I used a box end wrench to get enough force parallel to the countertop and on the bolt in an even, controlled manner. You can use an open end or combination wrench, too. A socket will only work if the faces of the 2 nuts line up just right when they're jammed together.