0
0

Kopā:€ 0.00

Skatīt grozuIzrakstīties
LoginRegister
0

Kopā:€ 0.00

Skatīt grozuIzrakstīties
LoginRegister

NEIKO 10037A kreisās puses urbju komplekts, ātrgaitas tērauda urbjmašīnas ar titāna nitrīda pārklājumu, apgrieztās grieznes urbji, SAE izmēri, 15 daļ. komplekts 15 GAB TITĀNIJA — KREISĀ ROKA

Brand:Neiko

3.3/5

€
68.47

VISS VIENĀ KOMPLEKTS: šis komplekts tiek piegādāts kopā ar urbjiem, kas ir ievietoti triecienizturīgā metāla indeksu glabāšanas maciņā. Katram uzgalim ir noteikta izmēra slots ātrai identificēšanai un vienkāršai organizēšanai, pārnesamībai un drošībai jūsu mājās, garāžā vai darbnīcā. PAREIZAIS IZMĒRS: Mūsu daudzpusīgais kreisās puses urbju komplekts ir pieejams 5, 13 un 15 daļu SAE komplektos. Izvēlieties ātrgaitas urbju komplektu, kas atbilst jūsu skrūvju nosūcēja vajadzībām. Katrs komplekts lieliski papildina automašīnu vai mājas instrumentus. DAUDZĪGI KREISĀS DAĻAS: Īpašais kreisās puses dizains ir ideāli piemērots lietošanai ar reversīvām urbjiem ar skrūvju novilcējiem, lai noņemtu saplīsušos stiprinājumus, skrūves, skrūves un tapas mājas remonta, automašīnu garāžu projektu, profesionāla darba un citu darbu laikā. KVALITĀTES TITĀNA UZZURI: Šie urbji ir izgatavoti no ātrgaitas tērauda ar titāna nitrīda pārklājumu, kas nodrošina augstu virsmas cietību, palīdzot iekļūt izturīgos materiālos. Tērauds arī samazina berzi starp uzgali un sagatavi. TWIST DILL-BIT KOMPLEKTS: Katram tērauda urbim ir leņķa uzgalis, vērpšanas veids un 135 grādu šķelšanās punkts precīzai pašcentrēšanai. Izstrādāti, lai palielinātu griešanas ātrumu, šie urbji novērš staigāšanu, lai ātri notīrītu skaidas un daļiņas.

Summa
Pievienot grozamPērc tagad

EAN: 837013100379

Kategorijas Elektroinstrumenti un rokas darbarīki, Elektroinstrumentu daļas un piederumi, Elektrourbju daļas un piederumi, Frezas konusveida zobu frēzēm, urbji Uzgaļi, Jobber urbji,

VISS VIENĀ KOMPLEKTS: šis komplekts tiek piegādāts kopā ar urbjiem, kas ir ievietoti triecienizturīgā metāla indeksu glabāšanas maciņā. Katram uzgalim ir noteikta izmēra slots ātrai identificēšanai un vienkāršai organizēšanai, pārnesamībai un drošībai jūsu mājās, garāžā vai darbnīcā. PAREIZAIS IZMĒRS: Mūsu daudzpusīgais kreisās puses urbju komplekts ir pieejams 5, 13 un 15 daļu SAE komplektos. Izvēlieties ātrgaitas urbju komplektu, kas atbilst jūsu skrūvju nosūcēja vajadzībām. Katrs komplekts lieliski papildina automašīnu vai mājas instrumentus. DAUDZĪGI KREISĀS DAĻAS: Īpašais kreisās puses dizains ir ideāli piemērots lietošanai ar reversīvām urbjiem ar skrūvju novilcējiem, lai noņemtu saplīsušos stiprinājumus, skrūves, skrūves un tapas mājas remonta, automašīnu garāžu projektu, profesionāla darba un citu darbu laikā. KVALITĀTES TITĀNA UZZURI: Šie urbji ir izgatavoti no ātrgaitas tērauda ar titāna nitrīda pārklājumu, kas nodrošina augstu virsmas cietību, palīdzot iekļūt izturīgos materiālos. Tērauds arī samazina berzi starp uzgali un sagatavi. TWIST DILL-BIT KOMPLEKTS: Katram tērauda urbim ir leņķa uzgalis, vērpšanas veids un 135 grādu šķelšanās punkts precīzai pašcentrēšanai. Izstrādāti, lai palielinātu griešanas ātrumu, šie urbji novērš staigāšanu, lai ātri notīrītu skaidas un daļiņas.
Brand Neiko
Country of Origin China
Customer Reviews 4.3 4.3 out of 5 stars 2,165 ratings 4.3 out of 5 stars
Cutting Angle String 135 Degrees
Finish Type Titanium
Is Discontinued By Manufacturer No
Item Dimensions LxWxH 14.17 x 9.06 x 7.87 inches
Item model number 10037A
Item Weight 0.01 ounces
Manufacturer Ridgerock Tools Inc.
Material Alloy Steel
Product Dimensions 14.17 x 9.06 x 7.87 inches
Shank Type Straight
Surface Recommendation Metal,Steel
Tool Flute Type Spiral

3.3

13 Review
5 Star
63
4 Star
18
3 Star
9
2 Star
4
1 Star
6

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: Zero Signal
A great trick to have in your toolbox
If you've ever broken off a bolt below the surface, you know what your choices are: Try to tap it out with a punch, drill it out, use a bolt extractor, weld a nut onto it, etc. One that often gets overlooked is using a left hand drill bit. Since most bolts are right-hand thread, drilling with a left-hand bit does two things at once: It weakens the bolt which reduces the pressure on the outside holding it in place, and it provides a twisting force in the direction that unscrews the bolt. Often this is enough to get the bolt out by itself. If not, you either keep drilling or you use a screw extractor in the hole you just created. Very rarely do I have to go any further. This set of bits will handle small and medium-sized bolts and screws, and it does so well. The bits themselves have a tendency to get dull but they're not difficult to resharpen. Since I only drag them out when I break a bolt, they don't get a lot of use and thus last a long time. Would they survive in a machine shop? Maybe not. The metal is fairly soft and it doesn't take much to chowder up the cutting lips. But they've been in my home shop for 10 years and are still going strong. I use them sparingly, but when I need them they usually solve the problem quickly.
Scritto da: Blinds Guy
Worked
The smallest bit broke on me however the next size up did the trick in removing a broken bolt.
Scritto da: Steven Motley
Does the job
Used this to remove a broken bolt holding a strut in place. It did the job. Broke 1 drill bit during the process. But for the price have to say we'll worth it
Scritto da: J. Hoffman
Start small, use lube
These worked great. Broke a bolt off while putting a transmission back together. Started with the small bits and worked my way up in size. Did this about 3 times before the drill bit finally grabbed the bolt end and unscrewed it. My part is saved (minus a bolt). Used drill oil too keep bits from dulling. Bought the 13 piece set for nearly 1/2 the price.
Scritto da: KrakMonkE9
Godsend
I purchased these to remove some badly stripped screws, some of which had broken off heads. They worked perfectly, and efficiently drilled holes into the steel screws to permit me to insert and use some spiral flute extractors. After use, the drill bits were in great condition and showed very little wear.
Scritto da: robert jordan
good product
A good product for the cost. Worked well.
Scritto da: Gabe
Pretty good bits for the price
These bits got me out of several sticky situations with broken fasteners, i like that there is a few different sizes even tho i only use like the smaller ones for starting holes. they Dont break very easy about the only thing that would make these 5 star is coming with a lifetime warranty.
Scritto da: SiteReader
Got me out of a jam--recommended
I do most of my auto repair by myself––age 73, so no novice, but not a pro by any means. I had broken off two of the five valve cover bolts on my '02 Honda Accord while tightening down. (Watched too many videos on the subject and tried to use my 1/2-inch torque wrench, which just wasn't made for a light 7 foot-lb. setting. Next time, it's back to the old "feel" method.) These are 6 mm (just under 1/4-inch) bolts that have a flange on them that prevents tightening them down too deep into the aluminum head. So I suspected they were not jammed into the threads. They should come out easy if I could get a drill into the bolt center and reverse thread out. I tried my set of Grabit brand easy-outs, but it just made a mess of things. You set your drill on reverse and use one end to drill a pilot hole (they call it "burnishing"). Then you flip the bit over and use the other, reverse-threaded end to try to grab the bolt and screw it out. I tried the #1 and #2 Grabit bits, but no go. I suspect these are only good for soft metal, because I spent nearly an hour drilling and very little metal was removed. They just left a rounded depression in the top of the broken bolt. Their promotional videos always show it being used on wood screws, which are softer than automotive bolts. I switched to a nice set of titanium drill bits that I reserve for metal, no wood--trying 7/64, 1/8, 9/64, 5/32, and 11/64. Nothing would remove much steel. I haven't used this set much at all, so could not believe that every bit was dull. I began to suspect the bolts were made of a hardened steel, and might require carbide bits. Called a mechanic friend who told me he wouldn't do it, but knew a shop that could weld on a small nut and take it out. (Visions of big bucks began dancing in my head.) But he also said his brother had just used reverse drill bits to solve a problem on his motor cycle. Figured I'd give it a try, and almost drove down the local AutoZone to buy their set of 5 reverse bits for $9.99. Then saw that Amazon had this set of 13 reverse bits for only 3 bucks more, and I've had good luck with some Neiko products. So I waited the two days for Prime delivery, and so glad I did. Right away, I noticed the Neiko 1/8" reverse bit was really removing some metal. I had to also try 9/64 and 5/32 before it grabbed into the chewed up bolt head, and easily turned it out. The second bolt which I hadn't bolloxed up with a Grabit and other drill bits, just wound right out on the first try. Boy was I happy. Problem solved. This method should work for the rare bolt that has broken off this way, not because the thread is frozen or welded in there like you find on exhaust manifolds and other places--that's a whole other story. But for a small bolt that broke off the way mine did, I swear by this product.
Scritto da: brian matthews
Four Stars
solid product
Scritto da: Kindle Customer
Rubbish
The drills where blunt and broke at first use. A total waste of money. I had to pay customs duty to the Post Office of £12.00 to even get the things!
Scritto da: David Horn
Five Stars
They do the job I wanted them for.
Scritto da: Roberto
Good
Good
Scritto da: David
Found them quite useless.
Most of the drills broke on the first try out. Found them quite useless.

Saistītie produkti

hot
Cle-line Jobber Drill, 3/16, HSS C18438
4.1/5

€ 46.47

Cle-line Jobber Drill, 3/16, HSS C18438
4.1/5

€ 46.47

hot
IVY Classic 01048 3/4 collu x 6 collu sudraba un Deminga HSS urbis, 1/2 collas kāts, 1/glabāšanas futrālis 3/4
3.6/5

€ 53.79

IVY Classic 01048 3/4 collu x 6 collu sudraba un Deminga HSS urbis, 1/2 collas kāts, 1/glabāšanas futrālis 3/4
3.6/5

€ 53.79

hot
Urbju Amerika — KFD1008-SET 8 daļiņu lieljaudas ātrgaitas tērauda urbju komplekts ar samazinātu kātu (9/16 — 1 x 16. daļa), KFD sērija
2.7/5

€ 225.20

Urbju Amerika — KFD1008-SET 8 daļiņu lieljaudas ātrgaitas tērauda urbju komplekts ar samazinātu kātu (9/16 — 1 x 16. daļa), KFD sērija
2.7/5

€ 225.20

hot
KnKut 1,00 Metric Jobber garuma urbis
0.1/5

€ 22.90

KnKut 1,00 Metric Jobber garuma urbis
0.1/5

€ 22.90

hot
IVY Classic 01668 5 daļiņu numuru/burtu urbjmašīnu komplekts, M2 ātrgaitas tērauds, 135 grādu punkts, izturīgs plastmasas korpuss
3.6/5

€ 57.96

IVY Classic 01668 5 daļiņu numuru/burtu urbjmašīnu komplekts, M2 ātrgaitas tērauds, 135 grādu punkts, izturīgs plastmasas korpuss
3.6/5

€ 57.96

hot
Chicago Latrobe 54126 550. sērijas kobalta tērauda Jobber garuma urbju komplekts ar metāla korpusu, zelta oksīda apdari, 135 grādu šķelšanās punkts, metriska, 11 daļ., 1,0–6,0 mm ar 0,5 mm soli
3.8/5

€ 90.74

Chicago Latrobe 54126 550. sērijas kobalta tērauda Jobber garuma urbju komplekts ar metāla korpusu, zelta oksīda apdari, 135 grādu šķelšanās punkts, metriska, 11 daļ., 1,0–6,0 mm ar 0,5 mm soli
3.8/5

€ 90.74

hot
Viking urbis un rīks 5620 0 tips 240-UB 135 grādu šķelto punktu Magnum Super Premium Jobber urbis (12 pack), 1/8 1/8 collas
4/5

€ 54.39

Viking urbis un rīks 5620 0 tips 240-UB 135 grādu šķelto punktu Magnum Super Premium Jobber urbis (12 pack), 1/8 1/8 collas
4/5

€ 54.39

hot
BLACK+DECKER 19110 ložu urbis, 3/8 collas
3.6/5

€ 30.17

BLACK+DECKER 19110 ložu urbis, 3/8 collas
3.6/5

€ 30.17

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array

Kopā:€ 0.00

Skatīt grozuIzrakstīties

Kategorijas

Visas kategorijas
Izvēlne Kategorijas Netālu Ratiņi

Menu