POWERTEC 110090 4 x 24 collu slīplentes

Name: POWERTEC 110090 4 x 24 collu slīplentes
Brand: POWERTEC
SKU: 0736815007018
Price: 46.07 EUR
Availability: InStock

Brand:POWERTEC

3.4/5

€
46.07

Iepazīstinām ar 4 x 24 collu 80 graudu alumīnija oksīda slīpēšanas lenti, ko piedāvā POWERTEC. Šī augstākās kvalitātes 10 slīpēšanas lentu pakotne ir izstrādāta, lai nodrošinātu jūs ar rentablu ilgmūžīgu un augstas veiktspējas slīpēšanas lentu komplektu. Izgatavoti ar atklātu alumīnija oksīda (A/O) graudu pārklājumu, tie darbojas kā daudzfunkcionāls instruments, ko vislabāk izmantot koka slīpēšanai, formēšanai, noņemšanai un nodrošina gludu apdari daudzām jūsu kokapstrādes vajadzībām. Turklāt šīs jostas īpaši labi darbojas ar viegliem un krāsainiem metāliem, jaukšanas šuvēm, stiklšķiedru, plastmasu un gumiju. Katrai lentei ir X svara apģērba pamatne, un tai ir spēcīga sveķu saite ar labi izveidotām šuvēm, lai nodrošinātu ilgstošus rezultātus. Neatkarīgi no tā, vai esat profesionāls vai DIY cilvēks, šīs lieljaudas slīplentes ir saderīgas ar daudzām jūsu piemērotas slīpmašīnas, tostarp: Craftsman, Makita, Skil, Wen, Ridgid, Porter-Cable, Black+Decker, Bosch, Triton, Hitachi, Metabo un citas! Specifikācijas: Abrazīvās lentes izmērs: 4 collu x 24 collu smilšu izmērs. : 80 Materiāls: Premium Open Coat Alumīnija oksīds (A/O) Graudaina pamatne: Spēcīga “X” svara auduma pamatne: Spēcīga sadursavienojuma konstrukcijaPakotne: 10 gabaliGrita izvēles ceļvedis:• 40 – 60 Smalkas: Spēcīga slīpēšana un noņemšana• 80 – 180 Smalkas Nelielas nepilnības• 240–400 grunts: īpaši smalkas, gludas apdares nodrošināšana POWERTEC ir profesionāls augstas kvalitātes kokapstrādes mašīnu, kokapstrādes piederumu un plaša OEM rezerves daļu sortimenta ražotājs. Mēs esam apņēmušies pārsniegt cerības, vienlaikus ieviešot nozarē labākās inovācijas, tehnoloģijas un produktu izstrādi.

Summa

Pievienot grozam Pērc tagad

EAN: 0736815007018

Kategorijas Elektroinstrumenti un rokas darbarīki, Elektroinstrumentu daļas un piederumi, Elektroapdares instrumentu daļas un piederumi, Elektriskās slīpmašīnas daļas un piederumi, Slīpmašīnu siksnas,

GRIT: Pieejams plašā viendabīgā smilšu klāstā - 40/ 60/ 80 / 100/ 120/ 150/ 180/ 240/ 320/ 400. AMATNIECĪBA: šīm 4 x 24 collu slīpēšanas lentēm ir karstumizturīgs un mitrumizturīgs materiāls, un tās ir izstrādātas ar prasmīgi veidotām šuvēm, kas neplīst zem spiediena. PREMIUM GRADE: Izgatavots ar mūsu izcilo X-Weight apģērba pamatni, atklātu alumīnija oksīda graudu pārklājumu un iespaidīgu sveķu savienojumu, kas nodrošina ilgstošu darbību. LIETOŠANA: Darbojas ar lentes slīpmašīnu un pielietojumu sortimentu – nodrošina lieljaudas noņemšanas un slīpēšanas instrumentu kokam, alumīnijam, stiklšķiedrai, gumijai, plastmasai un krāsainajiem metāliem.

Amperage Capacity	11 Amps
Amperage Capacity	‎11 Amps
Batteries Included?	‎No
Batteries Required?	‎No
Brand	POWERTEC
Brand	‎POWERTEC
Country of Origin	‎China
Customer Reviews	4.3 4.3 out of 5 stars 740 ratings 4.3 out of 5 stars
Grit Number	80
Grit Number	‎80
Grit Type	Medium
Grit Type	‎Medium
Included Components	‎POWERTEC 110090 4 x 24" Sanding Belts \| 80 Grit Aluminum Oxide Sanding Belt \| Premium Sandpaper For Portable Belt Sander – 10 Pack
Is Discontinued By Manufacturer	‎No
Item Dimensions LxWxH	10 x 4 x 4 inches
Item Dimensions LxWxH	‎10 x 4 x 4 inches
Item model number	‎110090
Item Package Quantity	‎1
Item Weight	‎1.5 Pounds
Manufacturer	‎POWERTEC
Material	‎Aluminium
Part Number	‎110090
Product Dimensions	‎10 x 4 x 4 inches
Size	‎80 Grit

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Randy Browning

Can’t speak to longevity, but they work.

I’ve used one of the 40 grit belts, so I’ll generalize in this review. I purchased a Bauer 10amp 4x24 belt sander from Harbor, and these fit perfect. I’m working on a sap filled 16” pine disk so the medium causes the belt to gum up (it would not matter what belt you use), but it cleans up well by using a brass wire brush on the belt while running the sander. The finer the grit the more it will clog, but again that’s with any belt. The paper track material is thick and does not show any signs of separation, and the 4” width helps it track straight. The cost per belt is less than half of any big box belt, and only 70% of the offerings at Harbor, which were thin and no where near the accurate grit density.

Scritto da: Amazon Customer

Update after I use

Received on time. Have not used yet but seem to be well made. Will update after I use

Scritto da: jon fredricks

good service

good quality and price

Scritto da: D Lee

Belts Break!!

Poor seams!! Every belt used (4 in all) broke after several minutes of deck sanding with a Makita sander. On the 4th try I had to disassemble the sander to remove the broken belt. Upon closer inspection it is obvious that the seam tape is failing. See photo. Clearly this is a faulty design that has not been adequately tested by the manufacturer. My remaining belts will be trashed.

Scritto da: Warren Y.

solid sandpaper

I used this sandpaper to sand down uneven transition height between sheathings in a mobile home subfloor. The sandpaper is strong and i only used up 3 of these for the entire mobile home. One thing i learned is that if you're looking to take down surface quickly on plywood... go with a 60 or 36 grit paper. 80 is still too fine to take down uneven surface quickly. You'll be there all day although at the end of the day, the job actually gets done.

Scritto da: fishing buddy

Look good.

They look, were shipped promptly. Priced right. I just have been too busy to try them out. Want to work on half log benches stained and coated with epoxy. Used for the first time yesterday, work great.

Scritto da: Tandy Norris

They eat wood as they should.

They work great on my belt sander.

Scritto da: andres cardenas

Very week glue

I sand around 70-100 cabinet doors a day, and these sanding belts only lasted 7-13 doors per belt. I would imagine they would be amazing once you break in the belt, but you won't get to that point.

Scritto da: Vic

Works very well. Did the job I needed it to.

Have a small woodworking shop in my garage my wife and I make different things out of wood. The sandpaper came in very handy works well fits good on the machine. Longevity is OK. Value is good. Did what I needed it to do and I’m still using them.

Scritto da: Hyrule Cofee

Inconstant quality

I bought 4 packs of those sand belt. 2/4 of them was ok and does a great job. The 2 others broke after 5 minutes of sanding. The blue junction between ends is weak for them. So you get a chance of a good or really bad belt.

Scritto da: n

Don't buy these Sanding belts

They work for a while, but fall apart (catastrophically) within a few minutes of use. Other brands do not, so its not the fault of the sander. The belts start to come apart and tend to jam the sander. Do NOT use these. I tried to return an unopened package, but was (sadly) 2 days late and the return window is closed. I will never use Powertec products again.

Scritto da: Jorge Adrian Fernandez Campos

Muy mala calidad

Que lastima de la calidad del producto, llego en tiempo y el precio muy accesible pero lamentablemente al utilizar las bandas se despegaron de inmediato, no duro ni tres minutos de uso y se despegaba, utilice otra para ver si era un defecto en esa unidad, pero al parecer el pegamento no tiene la adherencia necesaria y se despega, lo cual puede ocasionar un accidente a quien está manipulando la lijadora

Scritto da: Chris R.

Garbage, never had so many belts break so quickly.

These belts are garbage and do not last more then 10 mins before snapping. I even went out and bought a quality belt to test my Sander before posting this. It worked perfect for 30 mins, put another on of these back in and snapped in less then 10 mins.