POWERTEC 148031 6 collu HSS savienojuma naži Delta 37-205 37-220 37-275X, komplektā pa 3

Name: POWERTEC 148031 6 collu HSS savienojuma naži Delta 37-205 37-220 37-275X, komplektā pa 3
Brand: POWERTEC
SKU: 5093791111784
Price: 42.14 EUR
Availability: InStock

Brand:POWERTEC

3.5/5

€
42.14

PRODUKTA APRAKSTS POWERTEC USA ātrgaitas tērauda (HSS) naži ir vairāk nekā vienkārši ēvelēšanas naži. Ražošanas process sākās ar augstākās kvalitātes Eiropas HSS materiālu, kam sekoja stingri profesionāla apstrāde un kvalitātes kontrole, kas nodrošina ārkārtēju asumu, precizitāti, līdzsvarošanu un stingru toleranci katram POWERTEC HSS Knife izstrādājumam. Pēdējā termiskā apstrāde uzlabo cietību un izturību. POWERTEC mērķis ir maksimāli palielināt griešanas veiktspēju, ko varētu sasniegt katra šuvju ēvele. Ar vislabāko kvalitāti POWERTEC šuvju asmeņi efektīvi un konsekventi griež koksni un atstāj gludu un līdzenu virsmu uz kokapstrādes sagatavēm neatkarīgi no tā, vai tā ir skujkoka vai cietkoksne. Neatkarīgi no tā, vai jūs tiecas pēc patiesa līdzenuma vai ražošanas efektivitātes, POWERTEC HSS asmeņi vienmēr ir jūsu rīcībā. POWERTEC šuvju ēveles asmens ir izgatavots no augstākās kvalitātes M2 ātrgaitas tērauda, kas importēts no Eiropas. POWERTEC USA ekskluzīvās manipulācijas un termiskā apstrāde ļauj asmeņiem saglabāt griešanas malas asumu ilgstošas lietošanas laikā un neskaitāmos griezumos. Mūsu nogurdinošais slīpēšanas darbs nodrošina, ka griešanas mala ir īpaši asa un taisna. Rūpnieciskā līmeņa konsekventā griešanas veiktspēja atstāj tikai vislabāko ēvelēšanas rezultātu uz šķembu virsmas. POWERTEC šuvju asmeņi atbalsta jūs, tiecoties pēc patiesa līdzenuma un produktivitātes. NO RAŽOTĀJA POWERTEC ātrgaitas tērauda (HSS) naži ir izgatavoti no augstākās kvalitātes ātrgaitas tērauda (HSS) ar veiktspēju, kas atbilst vai pārsniedz OEM produktu. Ražošanas process sākās ar augstākās kvalitātes HSS materiālu, kam sekoja stingri profesionāla apstrāde un kvalitātes kontrole, kas nodrošina ārkārtēju asumu, precizitāti, līdzsvarošanu un stingru toleranci katram POWERTEC HSS Knife izstrādājumam. Pēdējā termiskā apstrāde uzlabo cietību un izturību. POWERTEC ātrgaitas tērauda (HSS) naži paliek asi un kalpo ilgāk nekā parastie izstrādājumi. Mēs garantējam, ka POWERTEC ātrgaitas tērauda (HSS) naži atbilst vai pārsniedz OEM kvalitātes un rūpniecības standartus.

Summa

Pievienot grozam Pērc tagad

EAN: 5093791111784

Kategorijas instrumenti un mājokļa labiekārtošana, Elektroinstrumenti un rokas darbarīki, Elektroinstrumentu daļas un piederumi, Zāģu asmeņi, daļas un piederumi, Blades, Savienojuma naži,

Asmens izmērs: 6 collas x 5/8 collas x 3/32 collas. Trīs komplekts; plastmasas korpusa iepakojums. Viena mala. Izgatavots no ātrgaitas tērauda ilgākam griešanas mūžam. Rezerves asmeņi Delta 6 collu savienotājam 37-190, 37-195, 37-205, 37-220, 37-275X, 37-658.

Batteries Included?	‎No
Batteries Required?	‎No
Country of Origin	‎China
Customer Reviews	4.4 4.4 out of 5 stars 256 ratings 4.4 out of 5 stars
Included Components	‎Jointer Knives
Is Discontinued By Manufacturer	‎No
Item model number	‎148031
Item Package Quantity	‎1
Item Weight	‎5.6 ounces
Manufacturer	‎POWERTEC
Material	‎High Speed Steel
Number Of Pieces	‎3
Part Number	‎148031
Product Dimensions	‎9.3 x 0.8 x 0.29 inches
Size	‎6-Inch

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Rene Chabannes

Blades are very sharp and straight

These blades have a secondary angle ground on the edge. I didn't check the angles. The edges are very straight. They are for my son, so I don't know how well they will hold up.

Scritto da: Jacob Haley

Grizzly G1017 6" Jointer

Works great on my Grizzly G1017 6" jointer. Can't beat these blades for the money.

Scritto da: R. McArthur

Fit Powermatic Model 50

Blades were the exact dimensions in the description and were a good fit for my Powermatic Model 50 Jointer. - Checked against a known good straight edge and the blades were dead on. - Blades were razor sharp I don’t know how long these will retain their edge compared to other options but for the price they will work nicely until I can afford a helical cutter head.

Scritto da: Ordinary Average Guy

Good knives for a great price

I purchased these for my Delta 37-205/207 6" jointer. As expected I had to raise the outfeed table to accommodate the height of the new blades and zero out the outfeed table, the old knives had been sharpened multiple times and were of course shorter than the new blades as a result. After getting everything set, I ran a couple of pieces of walnut and white oak through it, never cut better.

Scritto da: mathew slater

Jointer

Fit perfect and sharp blades thanks!

Scritto da: Anuj Prateek

Larger but fits Rockwell/Delta 37-220

Recently bought an used Rockwell/Delta 37-220 jointer. Jointer came with original 40 year old knives. Bought these to replace the original knives. These knives are taller and thicker than the original knives but fit well. Note that the height difference could be due to sharpening of old knives. Face and edge jointed a test board. Cuts were smooth and board came out true. Don't know how long these will last bit don't care if they are cheap.

Scritto da: Jordan tilot

Decent blades, questionable material.

The blades are as advertised. My only concern is the steel used(or the temper) as they sent rather brittle. Chipped all 3 of them on some red oak I ran over them. Not bad chips or anything, the marks being left are easily sanded out, but concerning they got nicks so soon, and after very little use.

Scritto da: alas

Worked great on my old delta jointer

I used these in an old (1970-80s) Delta 6" jointer that I restored. They were a little longer than the originals but they work great. I haven't really tried out the rabbeting groove on my jointer; I haven't played with aligning the blade with that groove, but I would think it would work fine. The screws that hold the blades in the cutterhead lie in a narrow channel. I used an angle grinder flatten my baby wrench to fit. I used a cheapo dial indicator to align the blades, so that the height of all parts of the three blades were equidistant from the table height.

Scritto da: Paul Renaud

Good price, but the knives aren't very sharp

The price is right and they certainly fit, but they are not very sharp at all. I had to hone the edge new out of the box. I tried the hair shave test, and could actually apply huge amounts of pressure to the skin without even the hopes of removing a hair (although it did help scratch an itch). That is WAY too dull for a brand new edge. I would never let my hand plane or chisel blades get like that, and my planer blades were deadly sharp out of the box. I will send the 4 other blades to be sharpened. I will likely buy better blades in the future, as the cost of sharpening negates the price of the knives.

Scritto da: Mark & Consolacion Edwards

Cheap blades

Very poor blades, now I know why they are cheap. Was planning store bought pine boards and after a few passes one of the blades started to show nicks, not impressed with the blades, very cheap.

Scritto da: Merrit A.

Good Blades

I have an older Beaver planner and had a little trouble finding blades. I took a chance on these and they work perfectly.

Scritto da: David Shuffler

Horrible quality steel.

First cuts were good, but ran a small piece of curly maple through the plainer, and the hardness of the wood put small grooves in the blades.

Scritto da: MJM Creations

Value for money spent

The quality meets the needs for a hobby shop. Then you add in cost for the product,it's a no brainer. Value for cost is great.