POWERTEC 70228 2-1/2 collu Y-fitting putekļu savākšanas šļūtenes savienotājs, skaidra krāsa

Brand:POWERTEC

3.6/5

39.44

Iepazīstinām ar POWERTEC 2-1/2 collu caurspīdīgo Y-fitting putekļu savākšanas šļūtenes savienotāju. Ātri un vienkārši paplašiniet putekļu savācēja šļūteņu tīklu, lai efektīvāk apmierinātu darbnīcas telpas. Šis parocīgais savienotājelements ļauj savienot divas atsevišķas iekārtas tieši pie putekļu savācēja galvenās šļūtenes, lai nodrošinātu optimālu daudzpusību. Augstas kvalitātes caurspīdīgas plastmasas konstrukcija ērtai apskatei Jums vairs nav jāmin, kas notiek jūsu putekļu savākšanas sistēmā, izmantojot šos caurspīdīgos Y veida savienotājelementus. jūs vienmēr precīzi zināt, kas notiek. Daudzpusīgs dizains Neatkarīgi no tā, vai jūs sadalāt šļūteni slīpmašīnu pārim vai savienojat maršrutētāja galdu ar veikala putekļu sūcēju – lietojumu ir bezgalīgs. Vissvarīgākais ir tas, ka šis 2–1/2 collu putekļu savācēja šļūtenes savienotājs ir vērtīgs līdzeklis, lai jūsu darbnīca būtu tīra un no putekļiem. Premium BuildIzgatavots no augstākās kvalitātes, izturīgas, caurspīdīgas ABS plastmasas, un šis šļūtenes savienotājs ir izturīgs. , ļoti izturīgs un izturīgs pret nodilumu, kas parasti saistīts ar abrazīvu un liela apjoma lietošanu. Saderīgs izmērs Visi trīs 2-1/2 collu OD y montāžas nominālie gali ir nedaudz mazāki, lai ietilptu jūsu 2-1/2" ID putekļu šļūtenes iekšpusē. vai osta . Nesavienosies tieši ar citiem 2-1/2” OD portiem.Ārējais diametrs: 2-31/64”

IZMĒRI: Visi trīs 2-1/2 collu nominālais gala izmērs 2-31/64 collas OD un 2-7/32 collas ID
Batteries Included? ‎No
Batteries Required? ‎No
Brand POWERTEC
Color Clear
Color ‎Clear
Country of Origin ‎Taiwan
Customer Reviews 4.5 4.5 out of 5 stars 343 ratings 4.5 out of 5 stars
Included Components ‎2-1/2” Y-Fitting
Is Discontinued By Manufacturer ‎No
Item Dimensions LxWxH 6.5 x 2.5 x 5.75 inches
Item model number ‎70228
Item Package Quantity ‎1
Item Weight ‎5 ounces
Manufacturer ‎POWERTEC
Material Acrylonitrile Butadiene Styrene
Material ‎Acrylonitrile Butadiene Styrene
Nominal Wall Thickness 0.125 inch
Part Number ‎70228
Product Dimensions ‎6.5 x 2.5 x 5.75 inches
Size ‎2-1/2 inch

3.6

9 Review
5 Star
70
4 Star
19
3 Star
7
2 Star
2
1 Star
3

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar*

Scritto da: Patrick
Be sure to install in proper direction.
Well made , sturdy plastic material. Important to orientate in the proper direction to ensure good vacuum flow. I'd recommend this and purchase again.
Scritto da: Face0525
Worked Great
Used it on my 2.5 inch hoses for My shop vacuum
Scritto da: Kimnicha N.
Excellent Y fitting
This is exactly what I was looking to split my dust collection system. Very Very durable.
Scritto da: Doggie Bear
Perfect for Dewalt DWE7491
Perfect for the Dewalt DWE7491. Split the dust collection hose into top and bottom: one for the blade guard and one for the blade. You'll need a reducer for blade guard.
Scritto da: HKD
Worked great on for SawStop dust collection w/2-1/2" shop vac (with small mods)
I prefer to use my portable table saw outside, but sometimes the weather doesn't agree. With this fitting I was able to construct a fairly effective dust collection system with my RIDGID WD1450 shop vac. The Y fitting (2nd picture) gave me noticeably better suction than just teeing into a 2-1/2" vacuum line by cutting into it (1st picture), which I did until this fitting arrived. To get my shop-vac hose to fit snugly, I used some foil tape on the inside of the fitting to "build up" the inside diameter a bit. Had to do the same with the 1-1/4" fitting on my SawStop's guard (used duct tape there, no discernible difference in collection). Highly recommend POWERTEC's thumb-turn hose clamps as well.
Scritto da: Tom F.
Good fit and clear to see inside
Fitting is clear so you can easily see if there is a clog inside. It is a perfect fit for 2.5" hose. Good product.
Scritto da: Bill Patzold
Very useful
Nice way to split vacuum hose for 'twin ports
Scritto da: Bingo
Love ‘em! You gotta get this one!
Love the clarity factor and it slides right in my 2 1/2 clear hose. Got em all right here on Amazon where you get the best stuff at the best price.
Scritto da: Patrick
Didn't fit.
The 2.5 inches stated didn't match. Slightly off, didn't suit my needs.

Saistītie produkti

Atklājiet mūsu starptautisko tīklu

Mēs piegādājam uz 28 valstīm, vairāk nekā 200 000 produktu. Esiet informēts, abonējiet biļetenu.

Array