POWERTEC 71643 dubultā kabatas caurumu džiga koka apstrādei ar putekļu savācēja adapteri

Name: POWERTEC 71643 dubultā kabatas caurumu džiga koka apstrādei ar putekļu savācēja adapteri
Brand: POWERTEC
SKU: 0843441113348
Price: 49.43 EUR
Availability: InStock

Brand:POWERTEC

3.5/5

€
49.43

Iepazīstinām ar Twin Pocket Hole Jig Set no POWERTEC. Šis komplekts, kas paredzēts precīzai blakus esošo kabatas caurumu urbšanai gan jaunos projektos, gan remontdarbos, ļauj to izdarīt. Jig unikālā putekļu savākšanas sistēma padara to ātru, tīru un vienkāršu darbību, neapšaubāmi vienu no vienkāršākajām un efektīvākajām kabatas caurumu džiga sistēmām, kas pieejama mūsdienās. Šis daudzpusīgais rīks ar pielāgojamo pamatsistēmu palīdzēs jums viegli izmērīt koka biezumu. Twin Pocket Hole Jig komplekts ir lieliski piemērots jūsu nākamajam projektam neatkarīgi no tā, vai esat kokapstrādes darbinieks, profesionāls galdnieks vai DIY entuziasts. * Ātra iestatīšana un vienkārša regulēšana dažādiem komponentu izmēriem * Ideāli piemērots cietkoksnes, skujkoku un lokšņu materiālu savienošanai * Grozāmais putekļu savācēja adapteris nodrošina darbību bez skaidām un putekļiem * Izmantojiet divas kabatas divu caurumu urbšanai, lai palielinātu izturību, vai vienu caurumu šaurākām detaļām * Pilna garuma rūdītas urbšanas vadotnes precīzām kabatām un ilgam kalpošanas laikam * Daudzfunkcionāla konstrukcija remontam, maziem projektiem un celtniecībai * Iebūvēts sagataves biezums, urbšanas dziļuma iestatījums un iestatīšanas mērītājs Iepakojumā ir (1) Jig (1) Urbja uzgalis (1) Stop Collar (1) Sešstūra atslēga (1) R2 Bit Driver (1) Putekļu savācēja adapteris POWERTEC ir vadošais augstas kvalitātes kokapstrādes instrumentu un piederumu, mašīnu un OEM rezerves daļu sortimenta ražotājs. Mēs esam apņēmušies pārsniegt cerības, vienlaikus ieviešot nozarē jaunākās inovācijas, tehnoloģijas un produktu attīstību.

Summa

Pievienot grozam Pērc tagad

EAN: 0843441113348

Kategorijas instrumenti un mājokļa labiekārtošana, Elektroinstrumenti un rokas darbarīki, Elektroinstrumentu daļas un piederumi, Griešanas instrumentu piederumi,

PREMIUM: Lieljaudas tērauda urbju vadotnes ir izturīgas pret rūsu un nodrošina ilgstošu lietošanu. VIEGLI LIETOJAMĀ: Viegli uzstādāms un lietojams ar pieturām, džiga padara šo procesu vienkāršu, saglabā mērījumus precīzus un nodrošina skaistu izskata kabatu savienojumus. KONSTRUKCIJAS ĪPAŠĪBAS: Twin Pocket Hole Jig ir izstrādāts, lai nodrošinātu precīzu sānu kabatas caurumu urbšanu ar putekļu savācēja adapteri darbam bez skaidām (paredzēts darbam ar POWERTEC 70257/70355/70356 universālo mazo caurumu šļūteņu komplektu (izvēles piederums)) . FUNKCIJA: Savienojot cietu, mīkstu vai saplāksni, tas dažu sekunžu laikā izveido augstas precizitātes kokapstrādes caurumus un stiprus drošus savienojumus, nodrošinot ātru un vienkāršu darbību. IEKĻAUTS: (1) Twin Pocket Hole Jig komplekts ar urbjmašīnu, atdures apkakli, putekļu savācēja adapteri, R2 piedziņas uzgali un sešstūra atslēgu.

Batteries Required?	‎No
Country of Origin	‎Taiwan
Customer Reviews	4.5 4.5 out of 5 stars 750 ratings 4.5 out of 5 stars
Included Components	‎INCLUDES:
Item model number	‎71643
Item Package Quantity	‎1
Item Weight	‎9.5 ounces
Manufacturer	‎POWERTEC
Part Number	‎71643
Product Dimensions	‎7.5 x 2.75 x 1.75 inches
Style	‎Twin Pocket Hole Jig

5 Star

4 Star

3 Star

2 Star

1 Star

Uzrakstiet savu atsauksmi

Jūsu e-pasts netiks publicēts. Visi obligātie lauki ir atzīmēti ar^*

Jūsu vērtējums

Scritto da: Zack Tyhurst

Decent Option for the Cost

I was able to use it for installing dowels into a woodworking project, but my main complaint is the acrylic flap that you use to clamp it to the side of your board is a little bit more flexible than I would like. You have to be careful while drilling or it will wander.

Scritto da: Debbie

Very good but limited

This worked okay for dowels on the edges of boards, but has virtually no use for surface dowelling. You will need to clamp this device TIGHTLY to your board, since it has a tendency to want to move.

Scritto da: Chad and Serra Hadsell

Great kit and well priced, but mine was missing the 1/4" drill bit

This kit has been great so far, and a pretty good value for the money. Fortunately, I don't yet have a use for the 1/4" doweling jig, because my kit is missing the 1/4" drill bit. So, minus one star for the missing bit. But that will be easy enough to replace if and when I need it.

Scritto da: A.A. Ron

Good for the money

This dowel jig definitely helped keep my boards in alignment when I was making a table top glue up. My only problem was the plexiglass part can flex so on a few spots the whole was out of alignment with the adjoining board. I moved the clamp closer to the black plastic part. Maybe it is a learning curve issue. There are more robust dowel jigs, but this will get you pretty far for $20.

Scritto da: Eric Lee

Works Great

Used to make a rustic coffee table. Worked well. I used a basic grip clamp to hold it in place while drilling.

Scritto da: Amazon Customer

Gets the Job down

Just clamp this down when you are drilling dowels. You can get away will holding it but I prefer to be safer rather than sorry. Quick and easy to use.

Scritto da: Mike R.

Don't drop it!

This jig is very breakable. One slip onto a concrete floor and it's toast!

Scritto da: brianb

clamp it and go.

Was making a Murphy bed cabinet for a rockler kit. had a tough time aligning dowels with the milescraft doweling jig I had bought. Ended up buying this and was able to get all the dowels aligned on the first try. This worked great for the edge dowels. Ended up using the milescraft jig on the faces since this is very awkward to clamp on a larger board. overall, using this and the included bit for edges, and the milescraft and it's included bit for the faces makes doweling very easy and fast. I am an extreme novice when it comes to this stuff. I tried to build this cabinet with the least amount of tools possible.

Scritto da: TC

Arrived not in original packaging

Mine arrived in a taped up plastic parts bag, with the drill bit (collar attached) jammed into one of the holes and missing the allan key. The collar scratched up the plastic, only cosmetic damage but still irritating. I had also ordered the 3/8" size and it arrived (separately) in proper packaging and with all parts in excellent condition - possibly different seller? Its going to work, and I have plenty of allan keys including the one that came with the other size but it was a bit disappointing after the good job done on the other size. Contrary to some other reviews I find the fit of bit to guide is very good, just enough play to ensure no binding of the bit. Test joints work well. Not the best jig I've ever used but by no means the worst. Lower rating is purely for the bad packaging and the cosmetic damage it caused (suspect it was a returned unit sent out as new)

Scritto da: Richard Poulin

Works well

I'm not an experienced woodworker. And I've started using this guide on a project with maple... quite hard. I still managed to drill my holes, but the jig does need some practice. Sometimes, the drill jams. But it's not the tool. The tool is sturdy and well made.

Scritto da: tigabec

Can't recommend. Holes not aligned!

Can you believe selling a drilling jig that don't have the holes aligned properly? Might as well save your money and drill without a tool if the result is unaligned holes!!!

Scritto da: Jesús R

Mejor de lo esperado

La verdad las plantitas está muy bien fabricadas.. es metal con acrílico de muy buen espeso..los topes tienen un sistema de ajuste diferente a los normales. Muy precisa al realizar los ensambles.

Scritto da: Doug B.

Accuracy and value get 1 star because I can not go to negative stars

Once the holes are drilled, they are offline by 1/64. I just bought an $80 paperweight. In case you are wondering the center line on the jig was perfectly aligned on my scribe line on the test pieces.